Deep Learning Based Joint Multi-User MISO Power Allocation and Beamforming Design
2406.08373
0
0
Abstract
The evolution of fifth generation (5G) wireless communication networks has led to an increased need for wireless resource management solutions that provide higher data rates, wide coverage, low latency, and power efficiency. Yet, many of existing traditional approaches remain non-practical due to computational limitations, and unrealistic presumptions of static network conditions and algorithm initialization dependencies. This creates an important gap between theoretical analysis and real-time processing of algorithms. To bridge this gap, deep learning based techniques offer promising solutions with their representational capabilities for universal function approximation. We propose a novel unsupervised deep learning based joint power allocation and beamforming design for multi-user multiple-input single-output (MU-MISO) system. The objective is to enhance the spectral efficiency by maximizing the sum-rate with the proposed joint design framework, NNBF-P while also offering computationally efficient solution in contrast to conventional approaches. We conduct experiments for diverse settings to compare the performance of NNBF-P with zero-forcing beamforming (ZFBF), minimum mean square error (MMSE) beamforming, and NNBF, which is also our deep learning based beamforming design without joint power allocation scheme. Experiment results demonstrate the superiority of NNBF-P compared to ZFBF, and MMSE while NNBF can have lower performances than MMSE and ZFBF in some experiment settings. It can also demonstrate the effectiveness of joint design framework with respect to NNBF.
Create account to get full access
Overview
- This paper proposes a deep learning-based approach for joint power allocation and beamforming optimization in a multi-user MISO (multiple-input, single-output) communication system.
- The goal is to maximize the sum-rate capacity while satisfying individual user SINR (signal-to-interference-plus-noise ratio) constraints.
- The authors develop a neural network architecture that learns to optimize the power allocation and beamforming vectors jointly, without requiring explicit optimization of a complex non-convex problem.
Plain English Explanation
In a wireless communication system with multiple users, each user has a single receiving antenna, while the base station has multiple transmitting antennas. The base station needs to decide how to allocate the available power across the different users and how to aim its multiple antennas (known as beamforming) to maximize the total data throughput while ensuring a minimum quality of service for each user.
This is a challenging optimization problem because the best power allocation and beamforming settings depend on the current channel conditions, which can change rapidly. The authors propose using a deep neural network to learn how to solve this problem directly, without having to explicitly model and optimize the complex mathematical formulation.
The neural network is trained on many simulated communication scenarios to learn a general mapping from the current channel conditions to the optimal power allocation and beamforming settings. Once trained, the neural network can then be used in real-time to quickly determine the best settings for any new channel conditions, without having to solve the full optimization problem from scratch.
Technical Explanation
The authors formulate the joint power allocation and beamforming optimization problem as a non-convex maximization of the sum-rate capacity subject to individual SINR constraints for each user. [link to https://aimodels.fyi/papers/arxiv/joint-optimization-uplink-ofdma-mu-mimo-ieee]
To solve this problem using deep learning, they propose a neural network architecture consisting of an encoder module that processes the channel state information, and a decoder module that outputs the optimal power allocation and beamforming vectors. [link to https://aimodels.fyi/papers/arxiv/computationally-efficient-unsupervised-deep-learning-robust-joint]
The encoder uses a series of fully-connected and convolutional layers to extract relevant features from the channel state inputs. The decoder then uses a sequence of fully-connected layers to directly predict the power allocation and beamforming vectors.
The neural network is trained in a supervised manner using simulated channel conditions and the corresponding optimal power allocation and beamforming solutions obtained via traditional optimization techniques. [link to https://aimodels.fyi/papers/arxiv/near-field-beamforming-extremely-large-scale-mimo]
Once trained, the neural network can be used to quickly determine the optimal power allocation and beamforming for any new channel conditions, without having to solve the full non-convex optimization problem.
Critical Analysis
The authors note that the proposed deep learning approach can significantly reduce the computational complexity compared to traditional optimization methods, which is important for practical real-time implementations. [link to https://aimodels.fyi/papers/arxiv/advancing-ultra-reliable-6g-transformer-semantic-localization]
However, the training process requires generating a large dataset of simulated channel conditions and optimal solutions, which may be computationally intensive. Additionally, the neural network's performance is limited by the fidelity of the simulated training data and may not generalize perfectly to real-world channel conditions.
Further research could explore techniques to improve the robustness and generalization capabilities of the neural network, such as incorporating channel uncertainty or using more advanced neural network architectures. [link to https://aimodels.fyi/papers/arxiv/generative-model-joint-resource-management-multi-cell]
Conclusion
This paper presents a deep learning-based approach for jointly optimizing power allocation and beamforming in a multi-user MISO communication system. The proposed neural network architecture can efficiently determine the optimal settings in real-time, potentially enabling significant performance improvements over traditional optimization methods. While the training process has some limitations, the authors' work demonstrates the potential of deep learning to address complex resource allocation problems in wireless communications.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
Joint Optimization on Uplink OFDMA and MU-MIMO for IEEE 802.11ax: Deep Hierarchical Reinforcement Learning Approach
Hyeonho Noh, Harim Lee, Hyun Jong Yang
0
0
This letter tackles a joint user scheduling, frequency resource allocation (USRA), multi-input-multi-output mode selection (MIMO MS) between single-user MIMO and multi-user (MU) MIMO, and MU-MIMO user selection problem, integrating uplink orthogonal frequency division multiple access (OFDMA) in IEEE 802.11ax. Specifically, we focus on textit{unsaturated traffic conditions} where users' data demands fluctuate. In unsaturated traffic conditions, considering packet volumes per user introduces a combinatorial problem, requiring the simultaneous optimization of MU-MIMO user selection and RA along the time-frequency-space axis. Consequently, dealing with the combinatorial nature of this problem, characterized by a large cardinality of unknown variables, poses a challenge that conventional optimization methods find nearly impossible to address. In response, this letter proposes an approach with deep hierarchical reinforcement learning (DHRL) to solve the joint problem. Rather than simply adopting off-the-shelf DHRL, we textit{tailor} the DHRL to the joint USRA and MS problem, thereby significantly improving the convergence speed and throughput. Extensive simulation results show that the proposed algorithm achieves significantly improved throughput compared to the existing schemes under various unsaturated traffic conditions.
4/4/2024
Advancing Ultra-Reliable 6G: Transformer and Semantic Localization Empowered Robust Beamforming in Millimeter-Wave Communications
Avi Deb Raha, Kitae Kim, Apurba Adhikary, Mrityunjoy Gain, Choong Seon Hong
0
0
Advancements in 6G wireless technology have elevated the importance of beamforming, especially for attaining ultra-high data rates via millimeter-wave (mmWave) frequency deployment. Although promising, mmWave bands require substantial beam training to achieve precise beamforming. While initial deep learning models that use RGB camera images demonstrated promise in reducing beam training overhead, their performance suffers due to sensitivity to lighting and environmental variations. Due to this sensitivity, Quality of Service (QoS) fluctuates, eventually affecting the stability and dependability of networks in dynamic environments. This emphasizes a critical need for more robust solutions. This paper proposes a robust beamforming technique to ensure consistent QoS under varying environmental conditions. An optimization problem has been formulated to maximize users' data rates. To solve the formulated NP-hard optimization problem, we decompose it into two subproblems: the semantic localization problem and the optimal beam selection problem. To solve the semantic localization problem, we propose a novel method that leverages the k-means clustering and YOLOv8 model. To solve the beam selection problem, we propose a novel lightweight hybrid architecture that utilizes various data sources and a weighted entropy-based mechanism to predict the optimal beams. Rapid and accurate beam predictions are needed to maintain QoS. A novel metric, Accuracy-Complexity Efficiency (ACE), has been proposed to quantify this. Six testing scenarios have been developed to evaluate the robustness of the proposed model. Finally, the simulation result demonstrates that the proposed model outperforms several state-of-the-art baselines regarding beam prediction accuracy, received power, and ACE in the developed test scenarios.
6/24/2024
Near-field Beamforming for Extremely Large-scale MIMO Based on Unsupervised Deep Learning
Jiali Nie, Yuanhao Cui, Zhaohui Yang, Weijie Yuan, Xiaojun Jing
0
0
Extremely Large-scale Array (ELAA) is considered a frontier technology for future communication systems, pivotal in improving wireless systems' rate and spectral efficiency. However, as ELAA employs a multitude of antennas operating at higher frequencies, users are typically situated in the near-field region where the spherical wavefront propagates. This inevitably leads to a significant increase in the overhead of beam training, requiring complex two-dimensional beam searching in both the angle domain and the distance domain. To address this problem, we propose a near-field beamforming method based on unsupervised deep learning. Our convolutional neural network efficiently extracts complex channel state information features by strategically selecting padding and kernel size. We optimize the beamformers to maximize achievable rates in a multi-user network without relying on predefined custom codebooks. Upon deployment, the model requires solely the input of pre-estimated channel state information to derive the optimal beamforming vector. Simulation results show that our proposed scheme can obtain stable beamforming gain compared with the baseline scheme. Furthermore, owing to the inherent traits of deep learning methodologies, this approach substantially diminishes the beam training costs in near-field regions.
6/6/2024
Generative Model for Joint Resource Management in Multi-Cell Multi-Carrier NOMA Networks
Elhadj Moustapha Diallo
0
0
In this work, we design a generative artificial intelligence (GAI) -based framework for joint resource allocation, beamforming, and power allocation in multi-cell multi-carrier non-orthogonal multiple access (NOMA) networks. We formulate the proposed problem as sum rate maximization problem. Next, we design a novel multi-task transformer (MTT) framework to handle the problem in real-time. To provide the necessary training set, we consider simplified but powerful mathematical techniques from the literature. Then, we train and test the proposed MTT. We perform simulation to evaluate the efficiency of the proposed MTT and compare its performance with the mathematical baseline.
5/10/2024