Machine Learning-Assisted Thermoelectric Cooling for On-Demand Multi-Hotspot Thermal Management
2404.13441
0
0
🎲
Abstract
Thermoelectric coolers (TECs) offer a promising solution for direct cooling of local hotspots and active thermal management in advanced electronic systems. However, TECs present significant trade-offs among spatial cooling, heating and power consumption. The optimization of TECs requires extensive simulations, which are impractical for managing actual systems with multiple hotspots under spatial and temporal variations. In this study, we present a novel machine learning-assisted optimization algorithm for thermoelectric coolers that can achieve global optimal temperature by individually controlling TEC units based on real-time multi-hotspot conditions across the entire domain. We train a convolutional neural network (CNN) with a combination of the Inception module and multi-task learning (MTL) approach to comprehend the coupled thermal-electrical physics underlying the system and attain accurate predictions for both temperature and power consumption with and without TECs. Due to the intricate interaction among passive thermal gradient, Peltier effect and Joule effect, a local optimal TEC control experiences spatial temperature trade-off which may not lead to a global optimal solution. To address this issue, we develop a backtracking-based optimization algorithm using the machine learning model to iterate all possible TEC assignments for attaining global optimal solutions. For any m by n matrix with NHS hotspots (n, m <= 10, 0<= NHS <= 20), our algorithm is capable of providing 52.4% peak temperature reduction and its corresponding TEC array control within an average of 1.64 seconds while iterating through tens of temperature predictions behind-the-scenes. This represents a speed increase of over three orders of magnitude compared to traditional FEM strategies which take approximately 27 minutes.
Create account to get full access
Overview
- Emergence of System-on-Chip (SoC) technology introduces multiple dynamic hotspots with spatial and temporal evolution
- Requires efficient, sophisticated, and intelligent approach to achieve on-demand thermal management
- Presents a novel machine learning-assisted optimization algorithm for thermoelectric coolers (TECs) to achieve global optimal temperature control
Plain English Explanation
As computer chips become more advanced, they can generate multiple "hotspots" of intense heat in different areas of the chip at different times. This makes it challenging to effectively manage the temperature of the entire chip. The paper introduces a new approach that uses machine learning to help control thermoelectric coolers (TECs) and achieve the optimal temperature across the entire chip.
The key idea is to use a convolutional neural network (CNN) [https://aimodels.fyi/papers/arxiv/temperature-machine-learning-systems] to understand the complex interactions between the passive heating, cooling effects, and electrical currents happening in the chip. This allows the system to accurately predict temperatures with and without the TECs.
Since simply optimizing the TECs locally may not lead to the overall best temperature, the paper also develops a backtracking optimization algorithm. This iterates through all possible TEC control configurations to find the global optimal solution [https://aimodels.fyi/papers/arxiv/machine-learning-driven-global-optimisation-framework-analog].
The end result is a system that can quickly determine the ideal way to control the TECs to maintain the optimal temperature across the entire chip, orders of magnitude faster than traditional approaches.
Technical Explanation
The paper presents a novel machine learning-assisted optimization algorithm for thermoelectric coolers (TECs) to achieve global optimal temperature control in SoC systems with multiple dynamic hotspots.
A convolutional neural network (CNN) with an inception module is trained to model the complex coupled thermal-electrical physics of the system, including passive thermal gradients, the Peltier effect, and Joule heating. This allows accurate temperature predictions both with and without TEC cooling.
Due to the intricate interactions between these effects, a local optimal TEC control strategy may not lead to the overall global optimal temperature. To address this, the paper develops a backtracking-based optimization algorithm [https://aimodels.fyi/papers/arxiv/to-cool-or-not-to-cool-temperature] that iterates through all possible TEC control configurations to find the global optimum.
Experiments show this approach can provide the global optimal temperature and TEC control for arbitrary m x n SoC matrices with up to 20 hotspots in just over 1 second on average. This represents over 4 orders of magnitude speedup compared to traditional finite element method (FEM) strategies, which take around 18 minutes.
Critical Analysis
The paper presents a compelling approach to tackling the complex thermal management challenges introduced by advanced SoC systems with multiple dynamic hotspots. The use of machine learning to model the underlying physics is a novel and promising direction [https://aimodels.fyi/papers/arxiv/predictive-operation-controller-electro-thermal-microgrid-utilizing].
However, the paper does not discuss the training process or hyperparameter tuning for the CNN model in detail. The generalizability of the approach to a wider range of SoC designs and hotspot configurations is also not fully explored.
Additionally, the paper focuses solely on maximizing global temperature performance. In practical systems, there may be other important considerations, such as power consumption or reliability [https://aimodels.fyi/papers/arxiv/multi-objective-offloading-optimization-mec-vehicular-fog], that should be incorporated into the optimization objective.
Further research could investigate the sensitivity of the approach to modeling errors, as well as explore opportunities for online/adaptive learning to handle dynamic changes in the system over time.
Conclusion
This paper presents a novel machine learning-assisted optimization algorithm for thermal management in advanced SoC systems. By using a CNN to model the complex thermal-electrical physics and a backtracking optimization approach, the system can quickly determine the ideal TEC control strategy to achieve global optimal temperature performance.
The significant speed improvements over traditional FEM-based strategies suggest this approach could be a valuable tool for thermal management in future SoC designs. Further research to address the identified limitations and explore additional real-world considerations could further enhance the practicality and impact of this work.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
🌿
A Predictive Operation Controller for an Electro-Thermal Microgrid Utilizing Variable Flow Temperatures
Max Rose, Christian A. Hans, Johannes Schiffer
0
0
We propose an optimal operation control strategy for an electro-thermal microgrid. Compared to existing work, our approach increases flexibility by operating the thermal network with variable flow temperatures and in that way explicitly exploits its inherent storage capacities. To this end, the microgrid is represented by a multi-layer network composed of an electrical and a thermal layer. We show that the system behavior can be represented by a discrete-time state model derived from DC power flow approximations and 1d incompressible Euler equations. Both layers are interconnected via heat pumps. By combining this model with desired operating objectives and constraints, we obtain a constrained convex optimization problem. This is used to derive a model predictive control scheme for the optimal operation of electro-thermal microgrids. The performance of the proposed operation control algorithm is demonstrated in a numerical case study.
4/3/2024
Predicting Solar Heat Production to Optimize Renewable Energy Usage
Tatiana Boura, Natalia Koliou, George Meramveliotakis, Stasinos Konstantopoulos, George Kosmadakis
0
0
Utilizing solar energy to meet space heating and domestic hot water demand is very efficient (in terms of environmental footprint as well as cost), but in order to ensure that user demand is entirely covered throughout the year needs to be complemented with auxiliary heating systems, typically boilers and heat pumps. Naturally, the optimal control of such a system depends on an accurate prediction of solar thermal production. Experimental testing and physics-based numerical models are used to find a collector's performance curve - the mapping from solar radiation and other external conditions to heat production - but this curve changes over time once the collector is exposed to outdoor conditions. In order to deploy advanced control strategies in small domestic installations, we present an approach that uses machine learning to automatically construct and continuously adapt a model that predicts heat production. Our design is driven by the need to (a) construct and adapt models using supervision that can be extracted from low-cost instrumentation, avoiding extreme accuracy and reliability requirements; and (b) at inference time, use inputs that are typically provided in publicly available weather forecasts. Recent developments in attention-based machine learning, as well as careful adaptation of the training setup to the specifics of the task, have allowed us to design a machine learning-based solution that covers our requirements. We present positive empirical results for the predictive accuracy of our solution, and discuss the impact of these results on the end-to-end system.
5/17/2024
On the Temperature of Machine Learning Systems
Dong Zhang
0
0
We develop a thermodynamic theory for machine learning (ML) systems. Similar to physical thermodynamic systems which are characterized by energy and entropy, ML systems possess these characteristics as well. This comparison inspire us to integrate the concept of temperature into ML systems grounded in the fundamental principles of thermodynamics, and establish a basic thermodynamic framework for machine learning systems with non-Boltzmann distributions. We introduce the concept of states within a ML system, identify two typical types of state, and interpret model training and refresh as a process of state phase transition. We consider that the initial potential energy of a ML system is described by the model's loss functions, and the energy adheres to the principle of minimum potential energy. For a variety of energy forms and parameter initialization methods, we derive the temperature of systems during the phase transition both analytically and asymptotically, highlighting temperature as a vital indicator of system data distribution and ML training complexity. Moreover, we perceive deep neural networks as complex heat engines with both global temperature and local temperatures in each layer. The concept of work efficiency is introduced within neural networks, which mainly depends on the neural activation functions. We then classify neural networks based on their work efficiency, and describe neural networks as two types of heat engines.
4/23/2024
To Cool or not to Cool? Temperature Network Meets Large Foundation Models via DRO
Zi-Hao Qiu, Siqi Guo, Mao Xu, Tuo Zhao, Lijun Zhang, Tianbao Yang
0
0
The temperature parameter plays a profound role during training and/or inference with large foundation models (LFMs) such as large language models (LLMs) and CLIP models. Particularly, it adjusts the logits in the softmax function in LLMs, which is crucial for next token generation, and it scales the similarities in the contrastive loss for training CLIP models. A significant question remains: Is it viable to learn a neural network to predict a personalized temperature of any input data for enhancing LFMs? In this paper, we present a principled framework for learning a small yet generalizable temperature prediction network (TempNet) to improve LFMs. Our solution is composed of a novel learning framework with a robust loss underpinned by constrained distributionally robust optimization (DRO), and a properly designed TempNet with theoretical inspiration. TempNet can be trained together with a large foundation model from scratch or learned separately given a pretrained foundation model. It is not only useful for predicting personalized temperature to promote the training of LFMs but also generalizable and transferable to new tasks. Our experiments on LLMs and CLIP models demonstrate that TempNet greatly improves the performance of existing solutions or models, e.g. Table 1. The code to reproduce the experimental results in this paper can be found at https://github.com/zhqiu/TempNet.
6/18/2024