An Origami-Inspired Variable Friction Surface for Increasing the Dexterity of Robotic Grippers
2404.09644
0
0
Abstract
While the grasping capability of robotic grippers has shown significant development, the ability to manipulate objects within the hand is still limited. One explanation for this limitation is the lack of controlled contact variation between the grasped object and the gripper. For instance, human hands have the ability to firmly grip object surfaces, as well as slide over object faces, an aspect that aids the enhanced manipulation of objects within the hand without losing contact. In this letter, we present a parametric, origami-inspired thin surface capable of transitioning between a high friction and a low friction state, suitable for implementation as an epidermis in robotic fingers. A numerical analysis of the proposed surface based on its design parameters, force analysis, and performance in in-hand manipulation tasks is presented. Through the development of a simple two-fingered two-degree-of-freedom gripper utilizing the proposed variable-friction surfaces with different parameters, we experimentally demonstrate the improved manipulation capabilities of the hand when compared to the same gripper without changeable friction. Results show that the pattern density and valley gap are the main parameters that effect the in-hand manipulation performance. The origami-inspired thin surface with a higher pattern density generated a smaller valley gap and smaller height change, producing a more stable improvement of the manipulation capabilities of the hand.
Create account to get full access
Overview
- This paper presents an Origami-Inspired Variable Friction (O-VF) surface that can increase the dexterity of robotic grippers.
- The O-VF surface uses a folding pattern inspired by origami to create a variable friction surface that can adapt to different object shapes and materials.
- The researchers analyze the design and performance of the O-VF surface through numerical simulations and experiments.
Plain English Explanation
The researchers have developed a new type of gripper surface that is inspired by the art of origami folding. This surface is called the Origami-Inspired Variable Friction (O-VF) surface. The key idea is that by folding the surface in a specific pattern, it can change its friction properties and adapt to different objects that the gripper is trying to hold.
Robotic grippers often struggle to grasp and manipulate a wide variety of objects, especially ones with complex shapes or delicate surfaces. The O-VF surface is designed to solve this problem by providing a more dexterous and adaptable gripping surface. Similar research in this area includes wearable roller rings to enable robot dexterity, string-driven origami robots, and compliant tactile palms for robotic manipulation.
The researchers analyze the design and performance of the O-VF surface through computer simulations and physical experiments. They show that the folding pattern allows the surface to change its friction in a controlled way, enabling the gripper to better adapt to different objects and improve its overall dexterity.
Technical Explanation
The core of the O-VF surface is a folding pattern inspired by origami techniques. This pattern allows the surface to change its geometry and friction properties in a programmable way. The researchers used numerical simulations to analyze the relationship between the folding parameters and the resulting friction forces.
Through these simulations, they were able to optimize the folding design to achieve a wide range of friction coefficients. They then fabricated physical prototypes of the O-VF surface and tested them experimentally, validating the simulation results.
The experiments demonstrated the O-VF surface's ability to adapt its friction to different object materials, including metal, plastic, and fabric. This adaptability enables the gripper to manipulate a broader range of objects with greater dexterity, compared to traditional rigid gripper surfaces.
Other related research in this area includes multi-fingered robotic hands for grasping in cluttered environments and dynamic grasping of unknown objects.
Critical Analysis
The paper provides a thorough analysis of the O-VF surface design and its performance, but there are a few potential limitations and areas for further research:
- The experiments focused on static grasping and manipulation tasks, but the researchers acknowledge the need to investigate the surface's behavior under dynamic conditions, such as when the gripper is moving or subject to external forces.
- The current prototype is relatively simple and may not be scalable to larger or more complex gripper designs. Exploring ways to integrate the O-VF surface into different gripper architectures would be valuable.
- The paper does not address the long-term durability and reliability of the O-VF surface, which would be important considerations for real-world robotic applications.
Despite these minor caveats, the research presented in this paper represents an interesting and promising approach to improving the dexterity of robotic grippers through the use of an origami-inspired variable friction surface.
Conclusion
The Origami-Inspired Variable Friction (O-VF) surface developed in this paper offers a novel solution for enhancing the dexterity of robotic grippers. By leveraging the principles of origami folding, the O-VF surface can dynamically adjust its friction properties to better adapt to different object shapes and materials.
The researchers' numerical simulations and experimental validation demonstrate the potential of this approach to enable more versatile and dexterous robotic manipulation capabilities. While further work is needed to address certain limitations, the O-VF concept represents an innovative step forward in the field of robotic gripping and manipulation.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
Design, Calibration, and Control of Compliant Force-sensing Gripping Pads for Humanoid Robots
Yuanfeng Han, Boren Jiang, Gregory S. Chirikjian
0
0
This paper introduces a pair of low-cost, light-weight and compliant force-sensing gripping pads used for manipulating box-like objects with smaller-sized humanoid robots. These pads measure normal gripping forces and center of pressure (CoP). A calibration method is developed to improve the CoP measurement accuracy. A hybrid force-alignment-position control framework is proposed to regulate the gripping forces and to ensure the surface alignment between the grippers and the object. Limit surface theory is incorporated as a contact friction modeling approach to determine the magnitude of gripping forces for slippage avoidance. The integrated hardware and software system is demonstrated with a NAO humanoid robot. Experiments show the effectiveness of the overall approach.
6/3/2024
Wearable Roller Rings to Enable Robot Dexterous In-Hand Manipulation through Active Surfaces
Hayden Webb, Podshara Chanrungmaneekul, Shenli Yuan, Kaiyu Hang
0
0
In-hand manipulation is a crucial ability for reorienting and repositioning objects within grasps. The main challenges are not only the complexity in the computational models, but also the risks of grasp instability caused by active finger motions, such as rolling, sliding, breaking, and remaking contacts. Based on the idea of manipulation without lifting a finger, this paper presents the development of Roller Rings (RR), a modular robotic attachment with active surfaces that is wearable by both robot and human hands. By installing and angling the RRs on grasping systems, such that their spatial motions are not co-linear, we derive a general differential motion model for the object actuated by the active surfaces. Our motion model shows that complete in-hand manipulation skill sets can be provided by as few as only 2 RRs through non-holonomic object motions, while more RRs can enable enhanced manipulation dexterity with fewer motion constraints. Through extensive experiments, we wear RRs on both a robot hand and a human hand to evaluate their manipulation capabilities, and show that the RRs can be employed to manipulate arbitrary object shapes to provide dexterous in-hand manipulation.
4/9/2024
Sensorized Soft Skin for Dexterous Robotic Hands
Jana Egli (ETH Zurich), Benedek Forrai (ETH Zurich), Thomas Buchner (ETH Zurich), Jiangtao Su (Nanyang Technological University Singapore), Xiaodong Chen (Nanyang Technological University Singapore), Robert K. Katzschmann (ETH Zurich)
0
0
Conventional industrial robots often use two-fingered grippers or suction cups to manipulate objects or interact with the world. Because of their simplified design, they are unable to reproduce the dexterity of human hands when manipulating a wide range of objects. While the control of humanoid hands evolved greatly, hardware platforms still lack capabilities, particularly in tactile sensing and providing soft contact surfaces. In this work, we present a method that equips the skeleton of a tendon-driven humanoid hand with a soft and sensorized tactile skin. Multi-material 3D printing allows us to iteratively approach a cast skin design which preserves the robot's dexterity in terms of range of motion and speed. We demonstrate that a soft skin enables firmer grasps and piezoresistive sensor integration enhances the hand's tactile sensing capabilities.
5/1/2024
🤿
Learning to Detect Slip through Tactile Estimation of the Contact Force Field and its Entropy
Xiaohai Hu, Aparajit Venkatesh, Yusen Wan, Guiliang Zheng, Neel Jawale, Navneet Kaur, Xu Chen, Paul Birkmeyer
0
0
Detection of slip during object grasping and manipulation plays a vital role in object handling. Existing solutions primarily rely on visual information to devise a strategy for grasping. However, for robotic systems to attain a level of proficiency comparable to humans, especially in consistently handling and manipulating unfamiliar objects, integrating artificial tactile sensing is increasingly essential. We introduce a novel physics-informed, data-driven approach to detect slip continuously in real time. We employ the GelSight Mini, an optical tactile sensor, attached to custom-designed grippers to gather tactile data. Our work leverages the inhomogeneity of tactile sensor readings during slip events to develop distinctive features and formulates slip detection as a classification problem. To evaluate our approach, we test multiple data-driven models on 10 common objects under different loading conditions, textures, and materials. Our results show that the best classification algorithm achieves a high average accuracy of 95.61%. We further illustrate the practical application of our research in dynamic robotic manipulation tasks, where our real-time slip detection and prevention algorithm is implemented.
4/30/2024