Reducing Mid-Circuit Measurements via Probabilistic Circuits
2405.13747
0
0
🏷️
Abstract
Mid-circuit measurements and measurement-controlled gates are supported by an increasing number of quantum hardware platforms and will become more relevant as an essential building block for quantum error correction. However, mid-circuit measurements impose significant demands on the quantum hardware due to the required signal analysis and classical feedback loop. This work presents a static circuit optimization algorithm that can substitute some of these measurements with an equivalent circuit with randomized gate applications. Our method uses ideas from constant propagation to classically precompute measurement outcome probabilities. Our proposed optimization is efficient, as its runtime scales polynomially on the number of qubits and gates of the circuit.
Create account to get full access
Overview
- Mid-circuit measurements and measurement-controlled gates are becoming more common in quantum hardware platforms, and are an important building block for quantum error correction.
- However, mid-circuit measurements place significant demands on quantum hardware due to the required signal analysis and classical feedback loop.
- This paper presents a static circuit optimization algorithm that can substitute some of these measurements with an equivalent circuit using randomized gate applications.
- The method uses ideas from constant propagation to classically precompute measurement outcome probabilities, making the optimization efficient and scalable.
Plain English Explanation
Quantum computers are a promising technology that could solve certain problems much faster than classical computers. However, they are very delicate and sensitive to errors. To make quantum computers more robust, researchers are developing techniques called "quantum error correction." Internal Link
One important part of quantum error correction is the ability to measure the state of the quantum system at different points during a computation, and then use that information to correct errors. These "mid-circuit measurements" allow the quantum computer to monitor its own progress and make adjustments as needed. Internal Link
However, performing these mid-circuit measurements is technically challenging for the quantum hardware. It requires complex signal analysis and a fast feedback loop between the quantum system and a classical computer controller. This places a significant burden on the quantum hardware.
The researchers in this paper propose a new optimization technique that can sometimes substitute these mid-circuit measurements with a slightly different quantum circuit that doesn't require the measurements. This "randomized gate" approach allows the quantum computer to achieve the same result without the measurement overhead.
The key insight is that the researchers can often predict the probabilities of the measurement outcomes ahead of time, using a classical precomputation. This allows them to construct an equivalent quantum circuit that avoids the measurements entirely. Internal Link
The end result is a quantum circuit that is more efficient and easier to implement on real quantum hardware, without sacrificing the important error correction capabilities provided by mid-circuit measurements.
Technical Explanation
The paper presents a static circuit optimization algorithm that can substitute some mid-circuit measurements with an equivalent circuit that uses randomized gate applications instead.
The core idea is to use constant propagation techniques to classically precompute the probabilities of the measurement outcomes. This allows the algorithm to construct an alternative quantum circuit that achieves the same overall effect as the original circuit, but without requiring the intermediate measurements.
The proposed optimization is efficient, with a runtime that scales polynomially in the number of qubits and gates in the circuit. This makes the technique practical for real-world quantum computations.
The algorithm works by analyzing the structure of the original quantum circuit and identifying opportunities to replace measurements with randomized gate sequences. It leverages the fact that many quantum computations can tolerate a certain amount of randomness or uncertainty, as long as the overall outcome probabilities are preserved.
By removing the need for mid-circuit measurements, this optimization technique can significantly reduce the hardware requirements and complexity of implementing quantum error correction. It represents an important advance in making quantum computers more practical and scalable. Internal Link
Critical Analysis
The paper provides a promising approach for optimizing quantum circuits to reduce the burden of mid-circuit measurements on the underlying hardware. However, there are a few potential limitations and areas for further research:
-
The technique may not be applicable to all quantum algorithms or circuit structures. It relies on being able to accurately precompute measurement outcome probabilities, which may not always be possible.
-
The randomized gate sequences introduced by the optimization could potentially introduce additional errors or noise into the quantum computation. The impact of this noise would need to be carefully analyzed and mitigated. Internal Link
-
The paper does not provide a comprehensive evaluation of the technique's performance and tradeoffs compared to alternative approaches for managing mid-circuit measurements. More empirical testing would help assess its practical benefits and limitations.
Overall, this work represents an interesting and valuable contribution to the field of quantum computing, but further research is needed to fully understand the scope and implications of the proposed optimization technique.
Conclusion
This paper presents a novel static circuit optimization algorithm that can substitute some mid-circuit measurements in quantum computations with an equivalent circuit using randomized gate applications. This approach has the potential to significantly reduce the hardware demands and complexity associated with implementing quantum error correction.
By leveraging classical precomputation of measurement outcome probabilities, the optimization technique is both efficient and scalable. It represents an important advance in making quantum computers more practical and accessible for real-world applications.
While the technique has some limitations and areas for further research, it is an exciting development that highlights the ongoing progress in the field of quantum computing. As quantum hardware continues to evolve, optimization strategies like this will become increasingly crucial for unlocking the full potential of this transformative technology.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
Learning to rank quantum circuits for hardware-optimized performance enhancement
Gavin S. Hartnett, Aaron Barbosa, Pranav S. Mundada, Michael Hush, Michael J. Biercuk, Yuval Baum
0
0
We introduce and experimentally test a machine-learning-based method for ranking logically equivalent quantum circuits based on expected performance estimates derived from a training procedure conducted on real hardware. We apply our method to the problem of layout selection, in which abstracted qubits are assigned to physical qubits on a given device. Circuit measurements performed on IBM hardware indicate that the maximum and median fidelities of logically equivalent layouts can differ by an order of magnitude. We introduce a circuit score used for ranking that is parameterized in terms of a physics-based, phenomenological error model whose parameters are fit by training a ranking-loss function over a measured dataset. The dataset consists of quantum circuits exhibiting a diversity of structures and executed on IBM hardware, allowing the model to incorporate the contextual nature of real device noise and errors without the need to perform an exponentially costly tomographic protocol. We perform model training and execution on the 16-qubit ibmq_guadalupe device and compare our method to two common approaches: random layout selection and a publicly available baseline called Mapomatic. Our model consistently outperforms both approaches, predicting layouts that exhibit lower noise and higher performance. In particular, we find that our best model leads to a $1.8times$ reduction in selection error when compared to the baseline approach and a $3.2times$ reduction when compared to random selection. Beyond delivering a new form of predictive quantum characterization, verification, and validation, our results reveal the specific way in which context-dependent and coherent gate errors appear to dominate the divergence from performance estimates extrapolated from simple proxy measures.
4/11/2024
🛠️
Design and execution of quantum circuits using tens of superconducting qubits and thousands of gates for dense Ising optimization problems
Filip B. Maciejewski, Stuart Hadfield, Benjamin Hall, Mark Hodson, Maxime Dupont, Bram Evert, James Sud, M. Sohaib Alam, Zhihui Wang, Stephen Jeffrey, Bhuvanesh Sundar, P. Aaron Lott, Shon Grabbe, Eleanor G. Rieffel, Matthew J. Reagor, Davide Venturelli
0
0
We develop a hardware-efficient ansatz for variational optimization, derived from existing ansatze in the literature, that parametrizes subsets of all interactions in the Cost Hamiltonian in each layer. We treat gate orderings as a variational parameter and observe that doing so can provide significant performance boosts in experiments. We carried out experimental runs of a compilation-optimized implementation of fully-connected Sherrington-Kirkpatrick Hamiltonians on a 50-qubit linear-chain subsystem of Rigetti Aspen-M-3 transmon processor. Our results indicate that, for the best circuit designs tested, the average performance at optimized angles and gate orderings increases with circuit depth (using more parameters), despite the presence of a high level of noise. We report performance significantly better than using a random guess oracle for circuits involving up to approx 5000 two-qubit and approx 5000 one-qubit native gates. We additionally discuss various takeaways of our results toward more effective utilization of current and future quantum processors for optimization.
5/3/2024
🛠️
A New Optimization Model for Multiple-Control Toffoli Quantum Circuit Design
Jihye Jung, Kevin Dalmeijer, Pascal Van Hentenryck
0
0
As quantum technology is advancing, the efficient design of quantum circuits has become an important area of research. This paper provides an introduction to the MCT quantum circuit design problem for reversible Boolean functions without assuming a prior background in quantum computing. While this is a well-studied problem, optimization models that minimize the true objective have only been explored recently. This paper introduces a new optimization model and symmetry-breaking constraints that improve solving time by up to two orders of magnitude compared to earlier work when a Constraint Programming solver is used. Experiments with up to seven qubits and using up to 15 quantum gates result in several new best-known circuits for well-known benchmarks. Finally, an extensive comparison with other approaches shows that optimization models may require more time but can provide superior circuits with optimality guarantees.
4/23/2024
🌿
Resource Optimized Quantum Squaring Circuit
Afrin Sultana, Edgard Mu~noz-Coreas
0
0
Quantum squaring operation is a useful building block in implementing quantum algorithms such as linear regression, regularized least squares algorithm, order-finding algorithm, quantum search algorithm, Newton Raphson division, Euclidean distance calculation, cryptography, and in finding roots and reciprocals. Quantum circuits could be made fault-tolerant by using error correcting codes and fault-tolerant quantum gates (such as the Clifford + T-gates). However, the T-gate is very costly to implement. Two qubit gates (such as the CNOT-gate) are more prone to noise errors than single qubit gates. Consequently, in order to realize reliable quantum algorithms, the quantum circuits should have a low T-count and CNOT-count. In this paper, we present a novel quantum integer squaring architecture optimized for T-count, CNOT-count, T-depth, CNOT-depth, and $KQ_T$ that produces no garbage outputs. To reduce costs, we use a novel approach for arranging the generated partial products that allows us to reduce the number of adders by 50%. We also use the resource efficient logical-AND gate and uncomputation gate shown in [1] to further save resources. The proposed quantum squaring circuit sees an asymptotic reduction of 66.67% in T-count, 50% in T-depth, 29.41% in CNOT-count, 42.86% in CNOT-depth, and 25% in KQ T with respect to Thapliyal et al. [2]. With respect to Nagamani et al. [3] the design sees an asymptotic reduction of 77.27% in T-count, 68.75% in T-depth, 50% in CNOT-count, 61.90% in CNOT-depth, and 6.25% in the $KQ_T$.
6/5/2024