Soft Synergies: Model Order Reduction of Hybrid Soft-Rigid Robots via Optimal Strain Parameterization
2405.12959
0
0
📈
Abstract
Soft robots offer remarkable adaptability and safety advantages over rigid robots, but modeling their complex, nonlinear dynamics remains challenging. Strain-based models have recently emerged as a promising candidate to describe such systems, however, they tend to be high-dimensional and time consuming. This paper presents a novel model order reduction approach for soft and hybrid robots by combining strain-based modeling with Proper Orthogonal Decomposition (POD). The method identifies optimal coupled strain basis functions -or mechanical synergies- from simulation data, enabling the description of soft robot configurations with a minimal number of generalized coordinates. The reduced order model (ROM) achieves substantial dimensionality reduction while preserving accuracy. Rigorous testing demonstrates the interpolation and extrapolation capabilities of the ROM for soft manipulators under static and dynamic conditions. The approach is further validated on a snake-like hyper-redundant rigid manipulator and a closed-chain system with soft and rigid components, illustrating its broad applicability. Finally, the approach is leveraged for shape estimation of a real six-actuator soft manipulator using only two position markers, showcasing its practical utility. This POD-based ROM offers significant computational speed-ups, paving the way for real-time simulation and control of complex soft and hybrid robots.
Create account to get full access
Overview
- Soft robots offer unique advantages like adaptability and safety, but modeling their complex dynamics is challenging
- This paper proposes a novel approach to model soft and hybrid (soft and rigid) robots using a reduced-order model (ROM) technique
- The method combines strain-based modeling with Proper Orthogonal Decomposition (POD) to enable accurate, computationally efficient simulation and control of soft robots
Plain English Explanation
Soft robots are an exciting new type of robot that are flexible and adaptable, unlike traditional rigid robots. This makes them well-suited for tasks where safety and conformity to complex shapes are important, like interacting with humans. However, modeling the intricate movements of soft robots is really tough.
The researchers in this paper came up with a new way to model soft and "hybrid" robots (a mix of soft and rigid parts). They start with a mathematical model that describes the strains and stresses inside the robot as it moves. Then, they use a technique called Proper Orthogonal Decomposition (POD) to find the most important patterns in how the robot deforms. This allows them to create a simplified model that can capture the robot's behavior accurately, but with far fewer mathematical variables.
This reduced-order model (ROM) provides significant computational speedups, making it practical for real-time simulation and control of complex soft and hybrid robots. The team tested it on different types of soft and hybrid robot designs, showing it works well across a range of systems.
Technical Explanation
The researchers developed a novel model order reduction approach for soft and hybrid robots that combines strain-based modeling with Proper Orthogonal Decomposition (POD). Strain-based models can capture the complex nonlinear dynamics of soft robots, but tend to be high-dimensional and computationally expensive.
The key innovation is the use of POD to identify optimal coupled strain basis functions, or "mechanical synergies", from simulation data. This enables describing the robot's configurations using a minimal set of generalized coordinates, resulting in a reduced-order model (ROM) with substantial dimensionality reduction while preserving accuracy.
The researchers rigorously tested the ROM's interpolation and extrapolation capabilities for soft manipulators under static and dynamic conditions. They also validated the approach on a snake-like hyper-redundant rigid manipulator and a closed-chain system with soft and rigid components, demonstrating its broad applicability.
Finally, the team leveraged the ROM for real-world shape estimation of a six-actuator soft manipulator using only two position markers, showcasing its practical utility for real-time simulation and control of complex soft and hybrid robots.
Critical Analysis
The paper presents a compelling approach to model soft and hybrid robots, addressing a key challenge in the field. The use of POD to identify optimal strain-based basis functions is a clever way to achieve substantial dimensionality reduction without sacrificing accuracy.
One potential limitation is that the ROM was only tested on relatively simple soft manipulator and hybrid designs. Its performance on more complex, multi-material soft robots with intricate deformation patterns may warrant further investigation.
Additionally, the paper does not delve into the computational complexity and scalability of the POD-based approach as the number of system degrees of freedom increases. This is an important consideration for real-world applications, especially for large-scale soft robotic systems.
Overall, this research represents a significant advancement in the modeling and simulation of soft and hybrid robots. The reduced-order modeling technique holds great promise to enable more efficient design, analysis, and control of these highly adaptable robotic systems.
Conclusion
This paper presents a novel approach to modeling the complex dynamics of soft and hybrid robots using a reduced-order modeling technique. By combining strain-based modeling with Proper Orthogonal Decomposition, the researchers were able to create accurate, computationally efficient models that can capture the behavior of these robots with far fewer variables.
The demonstrated capabilities of this approach, including its ability to handle a range of soft and hybrid robot designs, suggest it could be a valuable tool for the development of next-generation soft robotic systems. With the potential for real-time simulation and control, this research represents an important step toward realizing the full potential of soft robotics in a wide variety of applications, from healthcare to manufacturing and beyond.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
🤔
Beyond Inverted Pendulums: Task-optimal Simple Models of Legged Locomotion
Yu-Ming Chen, Jianshu Hu, Michael Posa
0
0
Reduced-order models (ROM) are popular in online motion planning due to their simplicity. A good ROM for control captures critical task-relevant aspects of the full dynamics while remaining low dimensional. However, planning within the reduced-order space unavoidably constrains the full model, and hence we sacrifice the full potential of the robot. In the community of legged locomotion, this has lead to a search for better model extensions, but many of these extensions require human intuition, and there has not existed a principled way of evaluating the model performance and discovering new models. In this work, we propose a model optimization algorithm that automatically synthesizes reduced-order models, optimal with respect to a user-specified distribution of tasks and corresponding cost functions. To demonstrate our work, we optimized models for a bipedal robot Cassie. We show in simulation that the optimal ROM reduces the cost of Cassie's joint torques by up to 23% and increases its walking speed by up to 54%. We also show hardware result that the real robot walks on flat ground with 10% lower torque cost. All videos and code can be found at https://sites.google.com/view/ymchen/research/optimal-rom.
4/4/2024
Adaptive Gait Modeling and Optimization for Principally Kinematic Systems
Siming Deng, Noah J. Cowan, Brian A. Bittner
0
0
Robotic adaptation to unanticipated operating conditions is crucial to achieving persistence and robustness in complex real world settings. For a wide range of cutting-edge robotic systems, such as micro- and nano-scale robots, soft robots, medical robots, and bio-hybrid robots, it is infeasible to anticipate the operating environment a priori due to complexities that arise from numerous factors including imprecision in manufacturing, chemo-mechanical forces, and poorly understood contact mechanics. Drawing inspiration from data-driven modeling, geometric mechanics (or gauge theory), and adaptive control, we employ an adaptive system identification framework and demonstrate its efficacy in enhancing the performance of principally kinematic locomotors (those governed by Rayleigh dissipation or zero momentum conservation). We showcase the capability of the adaptive model to efficiently accommodate varying terrains and iteratively modified behaviors within a behavior optimization framework. This provides both the ability to improve fundamental behaviors and perform motion tracking to precision. Notably, we are capable of optimizing the gaits of the Purcell swimmer using approximately 10 cycles per link, which for the nine-link Purcell swimmer provides a factor of ten improvement in optimization speed over the state of the art. Beyond simply a computational speed up, this ten-fold improvement may enable this method to be successfully deployed for in-situ behavior refinement, injury recovery, and terrain adaptation, particularly in domains where simulations provide poor guides for the real world.
4/19/2024
🛸
Task-Driven Computational Framework for Simultaneously Optimizing Design and Mounted Pose of Modular Reconfigurable Manipulators
Maolin Lei, Edoardo Romiti, Arturo Laurenz, Nikos G. Tsagarakis
0
0
Modular reconfigurable manipulators enable quick adaptation and versatility to address different application environments and tailor to the specific requirements of the tasks. Task performance significantly depends on the manipulator's mounted pose and morphology design, therefore posing the need of methodologies for selecting suitable modular robot configurations and mounted pose that can address the specific task requirements and required performance. Morphological changes in modular robots can be derived through a discrete optimization process involving the selective addition or removal of modules. In contrast, the adjustment of the mounted pose operates within a continuous space, allowing for smooth and precise alterations in both orientation and position. This work introduces a computational framework that simultaneously optimizes modular manipulators' mounted pose and morphology. The core of the work is that we design a mapping function that textit{implicitly} captures the morphological state of manipulators in the continuous space. This transformation function unifies the optimization of mounted pose and morphology within a continuous space. Furthermore, our optimization framework incorporates a array of performance metrics, such as minimum joint effort and maximum manipulability, and considerations for trajectory execution error and physical and safety constraints. To highlight our method's benefits, we compare it with previous methods that framed such problem as a combinatorial optimization problem and demonstrate its practicality in selecting the modular robot configuration for executing a drilling task with the CONCERT modular robotic platform.
5/6/2024
🧠
A hybrid numerical methodology coupling Reduced Order Modeling and Graph Neural Networks for non-parametric geometries: applications to structural dynamics problems
Victor Matray (LMPS), Faisal Amlani (LMPS), Fr'ed'eric Feyel (LMPS), David N'eron (LMPS)
0
0
This work introduces a new approach for accelerating the numerical analysis of time-domain partial differential equations (PDEs) governing complex physical systems. The methodology is based on a combination of a classical reduced-order modeling (ROM) framework and recently-introduced Graph Neural Networks (GNNs), where the latter is trained on highly heterogeneous databases of varying numerical discretization sizes. The proposed techniques are shown to be particularly suitable for non-parametric geometries, ultimately enabling the treatment of a diverse range of geometries and topologies. Performance studies are presented in an application context related to the design of aircraft seats and their corresponding mechanical responses to shocks, where the main motivation is to reduce the computational burden and enable the rapid design iteration for such problems that entail non-parametric geometries. The methods proposed here are straightforwardly applicable to other scientific or engineering problems requiring a large number of finite element-based numerical simulations, with the potential to significantly enhance efficiency while maintaining reasonable accuracy.
6/6/2024