Adaptive Anomaly Detection in Network Flows with Low-Rank Tensor Decompositions and Deep Unrolling
0
Sign in to get full access
Overview
- This paper presents a novel approach for adaptive anomaly detection in network flows using low-rank tensor decompositions and deep unrolling.
- The proposed method can effectively handle dynamic changes in network traffic patterns and detect anomalies in real-time.
- The technique leverages the inherent low-rank structure of network flow data and employs deep neural networks to learn an end-to-end mapping from observations to anomaly scores.
Plain English Explanation
The paper describes a technique for automatically detecting unusual or suspicious activity in network traffic data. Network traffic can be complex and constantly changing, making it challenging to identify anomalies using traditional methods.
The key idea is to represent the network data as a multi-dimensional tensor, which captures the relationships between different aspects of the traffic, such as source, destination, and time. This tensor is then decomposed into a low-rank representation, which can efficiently capture the underlying patterns in the data.
<a href="https://aimodels.fyi/papers/arxiv/adaptive-anomaly-detection-network-flows-low-rank">The low-rank tensor decomposition</a> allows the method to adapt to changes in the network traffic over time, rather than relying on a static model. Additionally, the paper uses a deep neural network that is "unrolled" to learn an end-to-end mapping from the observed network data to anomaly scores, which indicate how unusual or suspicious a particular traffic pattern is.
The key advantage of this approach is that it can detect anomalies in real-time, without the need for manual tuning or pre-defined rules. This makes it well-suited for monitoring and securing large, dynamic networks where traffic patterns are constantly evolving.
Technical Explanation
The paper proposes a two-stage framework for adaptive anomaly detection in network flows.
In the first stage, the network flow data is represented as a multi-dimensional tensor, which captures the relationships between various aspects of the traffic, such as source, destination, and time. This tensor is then decomposed into a low-rank representation using a novel tensor factorization algorithm. The low-rank structure of the tensor allows the model to adapt to changes in the network traffic over time, rather than relying on a static model.
In the second stage, a deep neural network is used to learn an end-to-end mapping from the low-rank tensor representation to anomaly scores. The network is "unrolled," meaning that the architecture of the network is designed to mimic the iterative optimization process used to compute the low-rank tensor decomposition. This allows the deep neural network to effectively learn the underlying patterns in the data and produce accurate anomaly scores in real-time.
<a href="https://aimodels.fyi/papers/arxiv/online-adaptive-anomaly-detection-defect-identification-aircraft">The authors evaluate their approach on real-world network traffic datasets</a> and demonstrate that it outperforms state-of-the-art anomaly detection methods in terms of both detection accuracy and computational efficiency.
Critical Analysis
The paper presents a compelling approach for adaptive anomaly detection in network flows, but it is important to consider some potential limitations and areas for further research.
One key limitation is that the paper does not extensively explore the impact of the choice of tensor factorization algorithm or the depth of the unrolled neural network on the overall performance of the system. <a href="https://aimodels.fyi/papers/arxiv/hierarchical-gaussian-mixture-normalizing-flow-modeling-unified">Exploring alternative tensor decomposition techniques or deeper neural network architectures</a> could potentially lead to further improvements in detection accuracy and adaptability.
Additionally, the paper focuses on detecting anomalies in network flow data, but it may be valuable to investigate the applicability of the proposed approach to other types of time-series data, such as sensor readings or financial transactions, where adaptive anomaly detection is also crucial.
<a href="https://aimodels.fyi/papers/arxiv/r3d-ad-reconstruction-via-diffusion-3d-anomaly">Another potential area for further research is the integration of the proposed method with other anomaly detection techniques, such as those based on reconstruction or generative models</a>, which could provide complementary information and lead to more robust and comprehensive anomaly detection systems.
Conclusion
The paper presents a novel approach for adaptive anomaly detection in network flows that leverages low-rank tensor decompositions and deep unrolling. The technique can effectively handle dynamic changes in network traffic patterns and detect anomalies in real-time, making it well-suited for monitoring and securing large, complex networks.
While the paper demonstrates promising results, there are opportunities for further research to explore the impact of different tensor factorization algorithms, neural network architectures, and the application of the proposed method to other domains. Overall, this work represents an important step forward in developing adaptive and efficient anomaly detection systems for network security and beyond.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
0
New!Adaptive Anomaly Detection in Network Flows with Low-Rank Tensor Decompositions and Deep Unrolling
Lukas Schynol, Marius Pesavento
Anomaly detection (AD) is increasingly recognized as a key component for ensuring the resilience of future communication systems. While deep learning has shown state-of-the-art AD performance, its application in critical systems is hindered by concerns regarding training data efficiency, domain adaptation and interpretability. This work considers AD in network flows using incomplete measurements, leveraging a robust tensor decomposition approach and deep unrolling techniques to address these challenges. We first propose a novel block-successive convex approximation algorithm based on a regularized model-fitting objective where the normal flows are modeled as low-rank tensors and anomalies as sparse. An augmentation of the objective is introduced to decrease the computational cost. We apply deep unrolling to derive a novel deep network architecture based on our proposed algorithm, treating the regularization parameters as learnable weights. Inspired by Bayesian approaches, we extend the model architecture to perform online adaptation to per-flow and per-time-step statistics, improving AD performance while maintaining a low parameter count and preserving the problem's permutation equivariances. To optimize the deep network weights for detection performance, we employ a homotopy optimization approach based on an efficient approximation of the area under the receiver operating characteristic curve. Extensive experiments on synthetic and real-world data demonstrate that our proposed deep network architecture exhibits a high training data efficiency, outperforms reference methods, and adapts seamlessly to varying network topologies.
Read more9/19/2024
0
Online-Adaptive Anomaly Detection for Defect Identification in Aircraft Assembly
Siddhant Shete, Dennis Mronga, Ankita Jadhav, Frank Kirchner
Anomaly detection deals with detecting deviations from established patterns within data. It has various applications like autonomous driving, predictive maintenance, and medical diagnosis. To improve anomaly detection accuracy, transfer learning can be applied to large, pre-trained models and adapt them to the specific application context. In this paper, we propose a novel framework for online-adaptive anomaly detection using transfer learning. The approach adapts to different environments by selecting visually similar training images and online fitting a normality model to EfficientNet features extracted from the training subset. Anomaly detection is then performed by computing the Mahalanobis distance between the normality model and the test image features. Different similarity measures (SIFT/FLANN, Cosine) and normality models (MVG, OCSVM) are employed and compared with each other. We evaluate the approach on different anomaly detection benchmarks and data collected in controlled laboratory settings. Experimental results showcase a detection accuracy exceeding 0.975, outperforming the state-of-the-art ET-NET approach.
Read more6/19/2024
0
Hierarchical Gaussian Mixture Normalizing Flow Modeling for Unified Anomaly Detection
Xincheng Yao, Ruoqi Li, Zefeng Qian, Lu Wang, Chongyang Zhang
Unified anomaly detection (AD) is one of the most challenges for anomaly detection, where one unified model is trained with normal samples from multiple classes with the objective to detect anomalies in these classes. For such a challenging task, popular normalizing flow (NF) based AD methods may fall into a homogeneous mapping issue,where the NF-based AD models are biased to generate similar latent representations for both normal and abnormal features, and thereby lead to a high missing rate of anomalies. In this paper, we propose a novel Hierarchical Gaussian mixture normalizing flow modeling method for accomplishing unified Anomaly Detection, which we call HGAD. Our HGAD consists of two key components: inter-class Gaussian mixture modeling and intra-class mixed class centers learning. Compared to the previous NF-based AD methods, the hierarchical Gaussian mixture modeling approach can bring stronger representation capability to the latent space of normalizing flows, so that even complex multi-class distribution can be well represented and learned in the latent space. In this way, we can avoid mapping different class distributions into the same single Gaussian prior, thus effectively avoiding or mitigating the homogeneous mapping issue. We further indicate that the more distinguishable different class centers, the more conducive to avoiding the bias issue. Thus, we further propose a mutual information maximization loss for better structuring the latent feature space. We evaluate our method on four real-world AD benchmarks, where we can significantly improve the previous NF-based AD methods and also outperform the SOTA unified AD methods.
Read more7/8/2024
0
R3D-AD: Reconstruction via Diffusion for 3D Anomaly Detection
Zheyuan Zhou, Le Wang, Naiyu Fang, Zili Wang, Lemiao Qiu, Shuyou Zhang
3D anomaly detection plays a crucial role in monitoring parts for localized inherent defects in precision manufacturing. Embedding-based and reconstruction-based approaches are among the most popular and successful methods. However, there are two major challenges to the practical application of the current approaches: 1) the embedded models suffer the prohibitive computational and storage due to the memory bank structure; 2) the reconstructive models based on the MAE mechanism fail to detect anomalies in the unmasked regions. In this paper, we propose R3D-AD, reconstructing anomalous point clouds by diffusion model for precise 3D anomaly detection. Our approach capitalizes on the data distribution conversion of the diffusion process to entirely obscure the input's anomalous geometry. It step-wisely learns a strict point-level displacement behavior, which methodically corrects the aberrant points. To increase the generalization of the model, we further present a novel 3D anomaly simulation strategy named Patch-Gen to generate realistic and diverse defect shapes, which narrows the domain gap between training and testing. Our R3D-AD ensures a uniform spatial transformation, which allows straightforwardly generating anomaly results by distance comparison. Extensive experiments show that our R3D-AD outperforms previous state-of-the-art methods, achieving 73.4% Image-level AUROC on the Real3D-AD dataset and 74.9% Image-level AUROC on the Anomaly-ShapeNet dataset with an exceptional efficiency.
Read more7/16/2024