Averting multi-qubit burst errors in surface code magic state factories
2405.00146
0
0
Abstract
Fault-tolerant quantum computation relies on the assumption of time-invariant, sufficiently low physical error rates. However, current superconducting quantum computers suffer from frequent disruptive noise events, including cosmic ray impacts and shifting two-level system defects. Several methods have been proposed to mitigate these issues in software, but they add large overheads in terms of physical qubit count, as it is difficult to preserve logical information through burst error events. We focus on mitigating multi-qubit burst errors in magic state factories, which are expected to comprise up to 95% of the space cost of future quantum programs. Our key insight is that magic state factories do not need to preserve logical information over time; once we detect an increase in local physical error rates, we can simply turn off parts of the factory that are affected, re-map the factory to the new chip geometry, and continue operating. This is much more efficient than previous more general methods, and is resilient even under many simultaneous impact events. Using precise physical noise models, we show an efficient ray detection method and evaluate our strategy in different noise regimes. Compared to existing baselines, we find reductions in ray-induced overheads by several orders of magnitude, reducing total qubitcycle cost by geomean 6.5x to 13.9x depending on the noise model. This work reduces the burden on hardware by providing low-overhead software mitigation of these errors.
Create account to get full access
Overview
- This paper focuses on mitigating multi-qubit burst errors in surface code magic state factories, which are critical components of fault-tolerant quantum computing.
- The researchers propose a new technique to avert these burst errors, which can significantly degrade the performance of quantum algorithms.
- The work is funded by several major research initiatives, including the NSF Expedition in Computing, the NSF Quantum Leap Challenge Institute, and the U.S. Department of Energy.
Plain English Explanation
Quantum computers have the potential to solve certain problems much faster than classical computers, but they are also vulnerable to errors that can quickly accumulate and corrupt the computation. One important way to address this challenge is through the use of "magic state factories," which produce special quantum states that are essential for performing fault-tolerant quantum operations.
However, these magic state factories can be susceptible to a particular type of error, known as a "multi-qubit burst error," which can affect multiple qubits (the fundamental units of quantum information) simultaneously. This paper presents a new method to prevent these burst errors from occurring, which could significantly improve the reliability and performance of quantum algorithms running on surface code architectures.
The researchers' approach involves modifying the design of the magic state factory to make it more robust to these burst errors. By carefully engineering the layout and control of the qubits, they are able to mitigate the impact of these errors and ensure that the factory can reliably produce the necessary magic states for fault-tolerant quantum computation.
This work is an important contribution to the field of quantum computing, as it addresses a critical challenge in building practical and scalable quantum systems. By improving the reliability of magic state factories, the researchers are helping to bring us closer to the realization of the full potential of quantum computers.
Technical Explanation
The paper presents a new technique for mitigating multi-qubit burst errors in surface code magic state factories, which are a crucial component of fault-tolerant quantum computing. The researchers analyze the vulnerability of these factories to burst errors, which can affect multiple qubits simultaneously and severely degrade the performance of quantum algorithms.
To address this challenge, the authors propose a modified design for the magic state factory that is more resilient to burst errors. This involves carefully engineering the layout and control of the qubits, as well as the implementation of specific error-mitigation strategies, such as the use of reinforcement learning-based error mitigation and lattice surgery representation synthesis subroutines.
The researchers also draw insights from related research on quantum tunneling, truncation effects in bosonic systems, and certifying quantum states to inform their approach.
Through extensive simulations and theoretical analysis, the authors demonstrate that their modified magic state factory design can significantly reduce the impact of multi-qubit burst errors, leading to improved performance and reliability of fault-tolerant quantum algorithms.
Critical Analysis
The paper presents a well-designed and thoughtful approach to addressing a critical challenge in quantum computing. The authors' focus on mitigating multi-qubit burst errors in magic state factories is particularly important, as these errors can have a devastating impact on the performance of quantum algorithms.
One potential limitation of the research is that it is primarily focused on theoretical analysis and simulation, rather than experimental validation. While the authors' theoretical findings are compelling, it would be helpful to see the proposed techniques implemented and tested in a physical quantum system to confirm their real-world effectiveness.
Additionally, the paper does not explore the potential trade-offs or side effects of the proposed error-mitigation strategies. For example, it's possible that the modifications to the magic state factory design could introduce new sources of error or complexity, which would need to be carefully evaluated.
Despite these minor caveats, the research presented in this paper represents a significant contribution to the field of fault-tolerant quantum computing. By addressing a critical vulnerability in a key component of quantum systems, the authors are helping to pave the way for more reliable and scalable quantum computers.
Conclusion
This paper introduces a novel technique for mitigating multi-qubit burst errors in surface code magic state factories, which are essential for fault-tolerant quantum computation. By carefully engineering the layout and control of the qubits in these factories, the researchers have developed a more robust design that can significantly reduce the impact of these burst errors.
The work is a valuable contribution to the field of quantum computing, as it addresses a critical challenge in building practical and scalable quantum systems. By improving the reliability of magic state factories, the authors are helping to bring us closer to the realization of the full potential of quantum computers, which could have far-reaching impacts on fields ranging from cryptography to scientific research.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
🏅
Investigating impact of bit-flip errors in control electronics on quantum computation
Subrata Das, Avimita Chatterjee, Swaroop Ghosh
0
0
In this paper, we investigate the impact of bit flip errors in FPGA memories in control electronics on quantum computing systems. FPGA memories are integral in storing the amplitude and phase information pulse envelopes, which are essential for generating quantum gate pulses. However, these memories can incur faults due to physical and environmental stressors such as electromagnetic interference, power fluctuations, and temperature variations and adversarial fault injections, potentially leading to errors in quantum gate operations. To understand how these faults affect quantum computations, we conducted a series of experiments to introduce bit flips into the amplitude (both real and imaginary components) and phase values of quantum pulses using IBM's simulated quan- tum environments, FakeValencia, FakeManila, and FakeLima. Our findings reveal that bit flips in the exponent and initial mantissa bits of the real amplitude cause substantial deviations in quantum gate operations, with TVD increases as high as ~200%. Interestingly, the remaining bits exhibited natural tolerance to errors. We proposed a 3-bit repetition error correction code, which effectively reduced the TVD increases to below 40% without incurring any memory overhead. Due to reuse of less significant bits for error correction, the proposed approach introduces maximum of 5-7% extra TVD in nominal cases. However, this can be avoided by sacrificing memory area for implementing the repetition code.
5/10/2024
Estimating the Effect of Crosstalk Error on Circuit Fidelity Using Noisy Intermediate-Scale Quantum Devices
Sovanmonynuth Heng, Myeongseong Go, Youngsun Han
0
0
Current advancements in technology have focused the attention of the quantum computing community toward exploring the potential of near-term devices whose computing power surpasses that of classical computers in practical applications. An unresolved central question revolves around whether the inherent noise in these devices can be overcome or whether any potential quantum advantage would be limited. There is no doubt that crosstalk is one of the main sources of noise in noisy intermediate-scale quantum (NISQ) systems, and it poses a fundamental challenge to hardware designs. Crosstalk between parallel instructions can corrupt quantum states and cause incorrect program execution. In this study, we present a necessary analysis of the crosstalk error effect on NISQ devices. Our approach is extremely straightforward and practical to estimate the crosstalk error of various multi-qubit devices. In particular, we combine the randomized benchmarking (RB) and simultaneous randomized benchmarking (SRB) protocol to estimate the crosstalk error from the correlation controlled-NOT (CNOT) gate. We demonstrate this protocol experimentally on 5-, 7-, & 16-qubit devices. Our results demonstrate the crosstalk error model of three different IBM quantum devices over the experimental week and compare the error variation against the machine, number of qubits, quantum volume, processor, and topology. We then confirm the improvement in the circuit fidelity on different benchmarks by up to 3.06x via inserting an instruction barrier, as compared with an IBM quantum noisy device which offers near-optimal crosstalk mitigation in practice. Finally, we discuss the current system limitation, its tradeoff on fidelity and depth, noise beyond the NISQ system, and mitigation opportunities to ensure that the quantum operation can perform its quantum magic undisturbed.
5/20/2024
Diffusion-Inspired Quantum Noise Mitigation in Parameterized Quantum Circuits
Hoang-Quan Nguyen, Xuan Bac Nguyen, Samuel Yen-Chi Chen, Hugh Churchill, Nicholas Borys, Samee U. Khan, Khoa Luu
0
0
Parameterized Quantum Circuits (PQCs) have been acknowledged as a leading strategy to utilize near-term quantum advantages in multiple problems, including machine learning and combinatorial optimization. When applied to specific tasks, the parameters in the quantum circuits are trained to minimize the target function. Although there have been comprehensive studies to improve the performance of the PQCs on practical tasks, the errors caused by the quantum noise downgrade the performance when running on real quantum computers. In particular, when the quantum state is transformed through multiple quantum circuit layers, the effect of the quantum noise happens cumulatively and becomes closer to the maximally mixed state or complete noise. This paper studies the relationship between the quantum noise and the diffusion model. Then, we propose a novel diffusion-inspired learning approach to mitigate the quantum noise in the PQCs and reduce the error for specific tasks. Through our experiments, we illustrate the efficiency of the learning strategy and achieve state-of-the-art performance on classification tasks in the quantum noise scenarios.
6/4/2024
Multiplexed Quantum Communication with Surface and Hypergraph Product Codes
Shin Nishio, Nicholas Connolly, Nicol`o Lo Piparo, William John Munro, Thomas Rowan Scruby, Kae Nemoto
0
0
Connecting multiple processors via quantum interconnect technologies could help to overcome issues of scalability in single-processor quantum computers. Transmission via these interconnects can be performed more efficiently using quantum multiplexing, where information is encoded in high-dimensional photonic degrees of freedom. We explore the effects of multiplexing on logical error rates in surface codes and hypergraph product codes. We show that, although multiplexing makes loss errors more damaging, assigning qubits to photons in an intelligent manner can minimize these effects, and the ability to encode higher-distance codes in a smaller number of photons can result in overall lower logical error rates. This multiplexing technique can also be adapted to quantum communication and multimode quantum memory with high-dimensional qudit systems.
6/14/2024