DC-Solver: Improving Predictor-Corrector Diffusion Sampler via Dynamic Compensation
0
Sign in to get full access
Overview
- Proposes a new method called DC-Solver to improve the efficiency of diffusion model sampling
- Focuses on the predictor-corrector diffusion sampler, a popular technique for fast sampling from diffusion models
- Introduces a dynamic compensation mechanism to address the biases introduced by the predictor-corrector method
Plain English Explanation
Diffusion models are a type of AI model that can generate realistic images, text, and other data. However, sampling from diffusion models (i.e., generating new samples) can be slow and computationally expensive.
The predictor-corrector diffusion sampler is a popular technique to speed up this sampling process. It uses a two-step approach: first, it "predicts" the next sample based on the current state, and then it "corrects" that prediction to better match the diffusion model.
While this predictor-corrector approach is effective, it can introduce biases into the generated samples. The DC-Solver method proposed in this paper aims to address this by dynamically compensating for these biases. The key idea is to continuously adjust the compensation based on the current state of the sampling process, rather than using a fixed compensation.
This dynamic compensation helps to reduce the biases and improve the quality of the generated samples, without significantly slowing down the sampling process.
Technical Explanation
The paper introduces the DC-Solver method, which builds upon the predictor-corrector diffusion sampler. The predictor-corrector sampler uses a two-step process to generate samples from a diffusion model:
- Prediction: The method first predicts the next sample based on the current state and the diffusion model parameters.
- Correction: It then corrects the predicted sample to better match the true diffusion model distribution.
While effective, the predictor-corrector approach can introduce biases into the generated samples. The DC-Solver method addresses this by dynamically compensating for these biases during the sampling process.
The key innovation of DC-Solver is the introduction of a
The paper presents experimental results on several benchmark diffusion model tasks, demonstrating that DC-Solver can outperform the standard predictor-corrector sampler in terms of sample quality and computational efficiency.
Critical Analysis
The DC-Solver method presented in this paper is a promising approach to improving the efficiency of diffusion model sampling. The dynamic compensation mechanism is a clever idea that addresses a key limitation of the predictor-corrector sampler.
One potential limitation of the research is that it focuses primarily on the predictor-corrector sampler and does not explore how DC-Solver might perform in the context of other diffusion sampling techniques, such as PNDM or Latent ODE. It would be interesting to see how DC-Solver compares to these other methods, and whether the dynamic compensation approach could be adapted to work with them as well.
Additionally, the paper does not delve into the theoretical properties of the dynamic compensation mechanism or provide a detailed analysis of its convergence and stability properties. A more rigorous mathematical treatment of the method could help to further understand its strengths and limitations.
Overall, the DC-Solver method represents a valuable contribution to the field of diffusion model sampling, and the dynamic compensation approach is a promising direction for future research in this area.
Conclusion
The DC-Solver method proposed in this paper offers a novel way to improve the efficiency of diffusion model sampling by dynamically compensating for the biases introduced by the predictor-corrector approach. The key innovation is the use of a dynamic compensation mechanism that continuously adjusts the compensation based on the current state of the sampling process.
The experimental results demonstrate that DC-Solver can outperform the standard predictor-corrector sampler in terms of sample quality and computational efficiency. While the research focuses primarily on the predictor-corrector sampler, the dynamic compensation approach could potentially be adapted to work with other diffusion sampling techniques as well.
Overall, the DC-Solver method represents an important step forward in the ongoing effort to make diffusion models more practical and accessible for a wide range of applications, from image and text generation to scientific modeling and beyond.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
0
DC-Solver: Improving Predictor-Corrector Diffusion Sampler via Dynamic Compensation
Wenliang Zhao, Haolin Wang, Jie Zhou, Jiwen Lu
Diffusion probabilistic models (DPMs) have shown remarkable performance in visual synthesis but are computationally expensive due to the need for multiple evaluations during the sampling. Recent predictor-corrector diffusion samplers have significantly reduced the required number of function evaluations (NFE), but inherently suffer from a misalignment issue caused by the extra corrector step, especially with a large classifier-free guidance scale (CFG). In this paper, we introduce a new fast DPM sampler called DC-Solver, which leverages dynamic compensation (DC) to mitigate the misalignment of the predictor-corrector samplers. The dynamic compensation is controlled by compensation ratios that are adaptive to the sampling steps and can be optimized on only 10 datapoints by pushing the sampling trajectory toward a ground truth trajectory. We further propose a cascade polynomial regression (CPR) which can instantly predict the compensation ratios on unseen sampling configurations. Additionally, we find that the proposed dynamic compensation can also serve as a plug-and-play module to boost the performance of predictor-only samplers. Extensive experiments on both unconditional sampling and conditional sampling demonstrate that our DC-Solver can consistently improve the sampling quality over previous methods on different DPMs with a wide range of resolutions up to 1024$times$1024. Notably, we achieve 10.38 FID (NFE=5) on unconditional FFHQ and 0.394 MSE (NFE=5, CFG=7.5) on Stable-Diffusion-2.1. Code is available at https://github.com/wl-zhao/DC-Solver
Read more9/6/2024
0
PFDiff: Training-free Acceleration of Diffusion Models through the Gradient Guidance of Past and Future
Guangyi Wang, Yuren Cai, Lijiang Li, Wei Peng, Songzhi Su
Diffusion Probabilistic Models (DPMs) have shown remarkable potential in image generation, but their sampling efficiency is hindered by the need for numerous denoising steps. Most existing solutions accelerate the sampling process by proposing fast ODE solvers. However, the inevitable discretization errors of the ODE solvers are significantly magnified when the number of function evaluations (NFE) is fewer. In this work, we propose PFDiff, a novel training-free and orthogonal timestep-skipping strategy, which enables existing fast ODE solvers to operate with fewer NFE. Specifically, PFDiff initially utilizes gradient replacement from past time steps to predict a springboard. Subsequently, it employs this springboard along with foresight updates inspired by Nesterov momentum to rapidly update current intermediate states. This approach effectively reduces unnecessary NFE while correcting for discretization errors inherent in first-order ODE solvers. Experimental results demonstrate that PFDiff exhibits flexible applicability across various pre-trained DPMs, particularly excelling in conditional DPMs and surpassing previous state-of-the-art training-free methods. For instance, using DDIM as a baseline, we achieved 16.46 FID (4 NFE) compared to 138.81 FID with DDIM on ImageNet 64x64 with classifier guidance, and 13.06 FID (10 NFE) on Stable Diffusion with 7.5 guidance scale.
Read more9/19/2024
0
Accelerating Diffusion Sampling with Optimized Time Steps
Shuchen Xue, Zhaoqiang Liu, Fei Chen, Shifeng Zhang, Tianyang Hu, Enze Xie, Zhenguo Li
Diffusion probabilistic models (DPMs) have shown remarkable performance in high-resolution image synthesis, but their sampling efficiency is still to be desired due to the typically large number of sampling steps. Recent advancements in high-order numerical ODE solvers for DPMs have enabled the generation of high-quality images with much fewer sampling steps. While this is a significant development, most sampling methods still employ uniform time steps, which is not optimal when using a small number of steps. To address this issue, we propose a general framework for designing an optimization problem that seeks more appropriate time steps for a specific numerical ODE solver for DPMs. This optimization problem aims to minimize the distance between the ground-truth solution to the ODE and an approximate solution corresponding to the numerical solver. It can be efficiently solved using the constrained trust region method, taking less than $15$ seconds. Our extensive experiments on both unconditional and conditional sampling using pixel- and latent-space DPMs demonstrate that, when combined with the state-of-the-art sampling method UniPC, our optimized time steps significantly improve image generation performance in terms of FID scores for datasets such as CIFAR-10 and ImageNet, compared to using uniform time steps.
Read more7/4/2024
🤔
0
Learning to Discretize Denoising Diffusion ODEs
Vinh Tong, Anji Liu, Trung-Dung Hoang, Guy Van den Broeck, Mathias Niepert
Diffusion Probabilistic Models (DPMs) are powerful generative models showing competitive performance in various domains, including image synthesis and 3D point cloud generation. However, sampling from pre-trained DPMs involves multiple neural function evaluations (NFE) to transform Gaussian noise samples into images, resulting in higher computational costs compared to single-step generative models such as GANs or VAEs. Therefore, a crucial problem is to reduce NFE while preserving generation quality. To this end, we propose LD3, a lightweight framework for learning time discretization while sampling from the diffusion ODE encapsulated by DPMs. LD3 can be combined with various diffusion ODE solvers and consistently improves performance without retraining resource-intensive neural networks. We demonstrate analytically and empirically that LD3 enhances sampling efficiency compared to distillation-based methods, without the extensive computational overhead. We evaluate our method with extensive experiments on 5 datasets, covering unconditional and conditional sampling in both pixel-space and latent-space DPMs. For example, in about 5 minutes of training on a single GPU, our method reduces the FID score from 6.63 to 2.68 on CIFAR10 (7 NFE), and in around 20 minutes, decreases the FID from 8.51 to 5.03 on class-conditional ImageNet-256 (5 NFE). LD3 complements distillation methods, offering a more efficient approach to sampling from pre-trained diffusion models.
Read more5/27/2024