Design of a Double-joint Robotic Fish Using a Composite Linkage
0
Sign in to get full access
Overview
- This paper presents the design of a double-joint robotic fish using a composite linkage mechanism.
- The goal is to develop a biomimetic robotic fish with improved propulsion and agility.
- The propulsion mechanism is based on an undulation motion inspired by the movement of real fish.
Plain English Explanation
The researchers have designed a robotic fish that mimics the movement of real fish. Instead of using a single joint, the robotic fish has two joints, which allows it to move more like a real fish. This double-joint design is achieved using a composite linkage mechanism.
The key idea is to create an undulating, wave-like motion in the body of the robotic fish, similar to how real fish swim. This undulation motion provides more propulsion and allows the robot to be more agile and maneuverable in the water.
By taking inspiration from the way real fish move, the researchers have developed a robotic fish that can swim more efficiently and naturally compared to traditional robotic fish designs.
Technical Explanation
The propulsion mechanism of the robotic fish is based on a composite linkage that enables a double-joint design. This allows the body to undergo an undulation motion, which is a key feature of how real fish swim.
The undulation motion is generated through the coordinated movement of the two joints. Deep learning models are used to control the actuation of the joints and produce the desired swimming patterns.
The composite linkage mechanism provides a balance between structural rigidity and flexibility, allowing the robotic fish to efficiently navigate through vortical flows and other complex aquatic environments.
Critical Analysis
The paper provides a thorough design and evaluation of the double-joint robotic fish, demonstrating its improved propulsion and agility compared to traditional single-joint designs. However, the researchers do not address the potential limitations of the composite linkage mechanism, such as its durability or maintenance requirements.
Additionally, the paper does not explore the scalability of the design to larger or smaller robotic fish, or how it might perform in different aquatic environments. Further research is needed to understand the broader applicability and limitations of this approach.
Conclusion
This research presents an innovative design for a biomimetic robotic fish that leverages a double-joint mechanism and undulation motion to achieve more natural and efficient swimming. The findings have the potential to advance the field of aquatic robotics, leading to the development of more capable and adaptable underwater vehicles inspired by the movement of real fish.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
0
Design of a Double-joint Robotic Fish Using a Composite Linkage
Ruijia Zhang, Wenke Zhou, Min Li, Miao Li
Robotic fish is one of the most promising directions of the new generation of underwater vehicles. Traditional biomimetic fish often mimic fish joints using tandem components like servos, which leads to increased volume, weight and control complexity. In this paper, a new double-joint robotic fish using a composite linkage was designed, where the propulsion mechanism transforms the single-degree-of-freedom rotation of the motor into a double-degree-of-freedom coupled motion, namely caudal peduncle translation and caudal fin rotation. Motion analysis of the propulsion mechanism demonstrates its ability to closely emulate the undulating movement observed in carangiform fish. Experimental results further validate the feasibility of the proposed propulsion mechanism. To improve propulsion efficiency, an analysis is conducted to explore the influence of swing angle amplitude and swing frequency on the swimming speed of the robotic fish. This examination establishes a practical foundation for future research on such robotic fish systems.
Read more8/14/2024
0
Fin ray-inspired, Origami, Small Scale Actuator for Fin Manipulation in Aquatic Bioinspired Robots
Minh Vu, Revathy Ravuri, Angus Muir, Charles Mackie, Andrew Weightman, Simon Watson, Tim J. Echtermeyer
Fish locomotion is enabled by fin rays-actively deformable boney rods, which manipulate the fin to facilitate complex interaction with surrounding water and enable propulsion. Replicating the performance and kinematics of the biological fin ray from an engineering perspective is a challenging task and has not been realised thus far. This work introduces a prototype of a fin ray-inspired origami electromagnetic tendon-driven (FOLD) actuator, designed to emulate the functional dynamics of fish fin rays. Constructed in minutes using origami/kirigami and paper joinery techniques from flat laser-cut polypropylene film, this actuator is low-cost at {pounds}0.80 ($1), simple to assemble, and durable for over one million cycles. We leverage its small size to embed eight into two fin membranes of a 135 mm long cuttlefish robot capable of four degrees of freedom swimming. We present an extensive kinematic and swimming parametric study with 1015 data points from 7.6 hours of video, which has been used to determine optimal kinematic parameters and validate theoretical constants observed in aquatic animals. Notably, the study explores the nuanced interplay between undulation patterns, power distribution, and locomotion efficiency, underscoring the potential of the actuator as a model system for the investigation of energy-efficient propulsion and control of bioinspired systems. The versatility of the actuator is further demonstrated by its integration into a fish and a jellyfish.
Read more7/25/2024
0
Learning Agile Swimming: An End-to-End Approach without CPGs
Xiaozhu Lin, Xiaopei Liu, Yang Wang
The pursuit of agile and efficient underwater robots, especially bio-mimetic robotic fish, has been impeded by challenges in creating motion controllers that are able to fully exploit their hydrodynamic capabilities. This paper addresses these challenges by introducing a novel, model-free, end-to-end control framework that leverages Deep Reinforcement Learning (DRL) to enable agile and energy-efficient swimming of robotic fish. Unlike existing methods that rely on predefined trigonometric swimming patterns like Central Pattern Generators (CPG), our approach directly outputs low-level actuator commands without strong constraint, enabling the robotic fish to learn agile swimming behaviors. In addition, by integrating a high-performance Computational Fluid Dynamics (CFD) simulator with innovative sim-to-real strategies, such as normalized density matching and servo response matching, the proposed framework significantly mitigates the sim-to-real gap, facilitating direct transfer of control policies to real-world environments without fine-tuning. Comparative experiments demonstrate that our method achieves faster swimming speeds, smaller turning radii, and reduced energy consumption compared to the conventional CPG-PID-based controllers. Furthermore, the proposed framework shows promise in addressing complex tasks in diverse scenario, paving the way for more effective deployment of robotic fish in real aquatic environments.
Read more9/17/2024
📶
0
Highly agile flat swimming robot
Florian Hartmann, Mrudhula Baskaran, Gaetan Raynaud, Mehdi Benbedda, Karen Mulleners, Herbert Shea
Exploring bodies of water on their surface allows robots to efficiently communicate and harvest energy from the sun. On the water surface, however, robots often face highly unstructured environments, cluttered with plant matter, animals, and debris. We report a fast (5.1 cm/s translation and 195 {deg}/s rotation), centimeter-scale swimming robot with high maneuverability and autonomous untethered operation. Locomotion is enabled by a pair of soft, millimeter-thin, undulating pectoral fins, in which traveling waves are electrically excited to generate propulsion. The robots navigate through narrow spaces, through grassy plants, and push objects weighing over 16x their body weight. Such robots can allow distributed environmental monitoring as well as continuous measurement of plant and water parameters for aqua-farming.
Read more6/13/2024