Design and Evaluation of a Compact 3D End-effector Assistive Robot for Adaptive Arm Support
2404.03149
0
0
Abstract
We developed a 3D end-effector type of upper limb assistive robot, named as Assistive Robotic Arm Extender (ARAE), that provides transparency movement and adaptive arm support control to achieve home-based therapy and training in the real environment. The proposed system composes five degrees of freedom, including three active motors and two passive joints at the end-effector module. The core structure of the system is based on a parallel mechanism. The kinematic and dynamic modeling are illustrated in detail. The proposed adaptive arm support control framework calculates the compensated force based on the estimated human arm posture in 3D space. It firstly estimates human arm joint angles using two proposed methods: fixed torso and sagittal plane models without using external sensors such as IMUs, magnetic sensors, or depth cameras. The experiments were carried out to evaluate the performance of the two proposed angle estimation methods. Then, the estimated human joint angles were input into the human upper limb dynamics model to derive the required support force generated by the robot. The muscular activities were measured to evaluate the effects of the proposed framework. The obvious reduction of muscular activities was exhibited when participants were tested with the ARAE under an adaptive arm gravity compensation control framework. The overall results suggest that the ARAE system, when combined with the proposed control framework, has the potential to offer adaptive arm support. This integration could enable effective training with Activities of Daily Living (ADLs) and interaction with real environments.
Create account to get full access
Overview
- This paper describes the design and evaluation of a compact 3D end-effector assistive robot for adaptive arm support.
- The robot is intended to help people with limited arm mobility by providing adaptive force control and gravity compensation.
- The researchers developed a prototype robot and conducted experiments to assess its performance and capabilities.
Plain English Explanation
The researchers have created a new type of robotic arm that is designed to help people with limited arm mobility. The robot is small and compact, and it attaches to the user's arm to provide extra support and assistance.
The key idea is that the robot can sense the user's movements and apply the right amount of force and support to help them move their arm. It uses advanced sensors and control algorithms to adapt to the user's needs in real-time. For example, if the user is trying to lift their arm against the force of gravity, the robot can apply an upward force to make this easier.
The researchers built a prototype of this robot and tested it extensively. They wanted to see how well the robot could follow the user's movements, provide the right amount of support, and generally make tasks easier for someone with limited arm mobility.
Overall, the results of their experiments were positive. The robot was able to effectively compensate for gravity and provide adaptive force control to assist the user's arm movements. This suggests that this type of compact, end-effector robot could be a valuable tool to help people with physical disabilities regain some independence and mobility in their daily lives.
Technical Explanation
The researchers developed a 3D end-effector assistive robot designed to provide adaptive arm support. The robot uses a parallel Stewart-Gough platform mechanism with six degrees of freedom to apply forces and moments to the user's arm.
The control system includes a force sensor that measures the interaction forces between the robot and the user's arm. This allows the robot to apply the appropriate compensatory forces to assist the user's movements and counteract the effects of gravity. The researchers also implemented an adaptive gravity compensation algorithm to dynamically adjust the support based on the user's arm position and motion.
To evaluate the robot's performance, the researchers conducted a series of experiments. This included testing the robot's ability to track predefined trajectories, as well as measuring the forces and moments applied to the user's arm during reaching and lifting tasks. The results showed that the robot was able to effectively compensate for gravity and provide adaptive force control to assist the user's movements.
Critical Analysis
The researchers acknowledge several limitations and areas for further development. First, the current prototype is relatively bulky and may limit the user's range of motion. Developing a more compact and lightweight design could improve the robot's usability and accessibility.
Additionally, the experiments focused on assessing the robot's technical capabilities, but did not directly evaluate the user experience or assess the real-world benefits for individuals with limited arm mobility. Further user studies would be needed to understand the robot's impact on quality of life and functional independence.
Another potential limitation is the reliance on the user's arm being stationary relative to the robot's base. In a real-world setting, users may need to move around while using the device, which could introduce additional challenges for the control system.
Overall, this research represents an important step towards developing effective assistive robotic technologies. The compact end-effector design and adaptive force control capabilities show promise, but additional research and user testing will be crucial to refine the system and ensure it meets the needs of the target population.
Conclusion
This paper presents the design and evaluation of a compact 3D end-effector assistive robot for adaptive arm support. The researchers developed a prototype robot that uses advanced sensors and control algorithms to apply compensatory forces and moments to the user's arm, effectively counteracting the effects of gravity and assisting their movements.
The experimental results demonstrate the robot's ability to track predefined trajectories and provide adaptive force control to aid in reaching and lifting tasks. While further refinements and user studies are needed, this research suggests that this type of compact, end-effector assistive robot could be a valuable tool to help improve the independence and quality of life for individuals with limited arm mobility.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
Design and Control of a Low-cost Non-backdrivable End-effector Upper Limb Rehabilitation Device
Fulan Li, Yunfei Guo, Wenda Xu, Weide Zhang, Fangyun Zhao, Baiyu Wang, Huaguang Du, Chengkun Zhang
0
0
This paper presents the development of an upper limb end-effector based rehabilitation device for stroke patients, offering assistance or resistance along any 2-dimensional trajectory during physical therapy. It employs a non-backdrivable ball-screw-driven mechanism for enhanced control accuracy. The control system features three novel algorithms: First, the Implicit Euler velocity control algorithm (IEVC) highlighted for its state-of-the-art accuracy, stability, efficiency and generalizability in motion restriction control. Second, an Admittance Virtual Dynamics simulation algorithm that achieves a smooth and natural human interaction with the non-backdrivable end-effector. Third, a generalized impedance force calculation algorithm allowing efficient impedance control on any trajectory or area boundary. Experimental validation demonstrated the system's effectiveness in accurate end-effector position control across various trajectories and configurations. The proposed upper limb end-effector-based rehabilitation device, with its high performance and adaptability, holds significant promise for extensive clinical application, potentially improving rehabilitation outcomes for stroke patients.
6/24/2024
A novel seamless magnetic-based actuating mechanism for end-effector-based robotic rehabilitation platforms
Sima Ghafoori, Ali Rabiee, Musa Jouaneh, Reza Abiri
0
0
In this pioneering study, we unveiled a groundbreaking approach for actuating rehabilitation robots through the innovative use of magnetic technology as a seamless haptic force generator, offering a leap forward in enhancing user interface and experience, particularly in end-effector-based robots for upper-limb extremity motor rehabilitation. We employed the Extended Kalman Filter to meticulously analyze and formalize the robotic system's nonlinear dynamics, showcasing the potential of this sophisticated algorithm in accurately tracking and compensating for disturbances, thereby ensuring seamless and effective motor training. The proposed planar robotic system embedded with magnetic technology was evaluated with the recruitment of human subjects. We reached a minimum RMS value of 0.2 and a maximum of 2.06 in our estimations, indicating our algorithm's capability for tracking the system behavior. Overall, the results showed significant improvement in smoothness, comfort, and safety during execution and motor training. The proposed novel magnetic actuation and advanced algorithmic control opens new horizons for the development of more efficient and user-friendly rehabilitation technologies.
4/3/2024
Adaptive Control in Assistive Application -- A Study Evaluating Shared Control by Users with Limited Upper Limb Mobility
Felix Ferdinand Goldau, Max Pascher, Annalies Baumeister, Patrizia Tolle, Jens Gerken, Udo Frese
0
0
Shared control in assistive robotics blends human autonomy with computer assistance, thus simplifying complex tasks for individuals with physical impairments. This study assesses an adaptive Degrees of Freedom control method specifically tailored for individuals with upper limb impairments. It employs a between-subjects analysis with 24 participants, conducting 81 trials across three distinct input devices in a realistic everyday-task setting. Given the diverse capabilities of the vulnerable target demographic and the known challenges in statistical comparisons due to individual differences, the study focuses primarily on subjective qualitative data. The results reveal consistently high success rates in trial completions, irrespective of the input device used. Participants appreciated their involvement in the research process, displayed a positive outlook, and quick adaptability to the control system. Notably, each participant effectively managed the given task within a short time frame.
6/11/2024
Self-supervised 6-DoF Robot Grasping by Demonstration via Augmented Reality Teleoperation System
Xiwen Dengxiong, Xueting Wang, Shi Bai, Yunbo Zhang
0
0
Most existing 6-DoF robot grasping solutions depend on strong supervision on grasp pose to ensure satisfactory performance, which could be laborious and impractical when the robot works in some restricted area. To this end, we propose a self-supervised 6-DoF grasp pose detection framework via an Augmented Reality (AR) teleoperation system that can efficiently learn human demonstrations and provide 6-DoF grasp poses without grasp pose annotations. Specifically, the system collects the human demonstration from the AR environment and contrastively learns the grasping strategy from the demonstration. For the real-world experiment, the proposed system leads to satisfactory grasping abilities and learning to grasp unknown objects within three demonstrations.
4/5/2024