Design, modeling, and characteristics of ringshaped robot actuated by functional fluid
2406.08135
0
0
🤷
Abstract
The controlled actuation of hydraulic and pneumatic actuators has unveiled fresh and thrilling opportunities for designing mobile robots with adaptable structures. Previously reported rolling robots, which were powered by fluidic systems, often relied on complex principles, cumbersome pump and valve systems, and intricate control strategies, limiting their applicability in other fields. In this investigation, we employed a distinct category of functional fluid identified as Electrohydrodynamic (EHD) fluid, serving as the pivotal element within the ring-shaped actuator. A short stream of functional fluid is placed within a fluidic channel and is then actuated by applying a direct current voltage aiming at shifting the center of mass of the robot and finally pushed the actuator to roll. We designed a ring-shaped fluidic robot, manufactured it using digital machining methods, and evaluated the robot's characteristics. Furthermore, we developed static and dynamic models to analyze the oscillation and rolling motion of the ring-shaped robots using the Lagrange method. This study is anticipated to contribute to the expansion of current research on EHD flexible actuators, enabling the realization of complex robotic systems.
Create account to get full access
Overview
- Explores the use of Electrohydrodynamic (EHD) fluids as a novel actuation mechanism for mobile robots with adaptable structures
- Designed and built a ring-shaped fluidic robot, developed models to analyze its oscillation and rolling motion
- Aims to contribute to the expansion of research on EHD flexible actuators for complex robotic systems
Plain English Explanation
Controlling the movement of hydraulic and pneumatic (air-powered) actuators has opened up new and exciting possibilities for designing mobile robots with flexible structures. Previous rolling robots powered by fluid systems often relied on complex principles, bulky pump and valve systems, and intricate control strategies, limiting their usefulness in other areas.
In this study, the researchers used a special type of fluid called Electrohydrodynamic (EHD) fluid as the key component in a ring-shaped actuator. They placed a small stream of this functional fluid inside a fluidic channel and applied an electric current to it, aiming to shift the robot's center of mass and make the actuator roll. They designed, built, and tested a ring-shaped fluidic robot using digital manufacturing techniques. They also developed models to analyze the robot's oscillation and rolling motion using the Lagrange method.
This research is expected to contribute to the advancement of EHD flexible actuators, which could enable the development of more complex robotic systems. Wearable roller rings and self-sensing feedback control of electrohydraulic robotic systems are examples of related areas that could benefit from this work.
Technical Explanation
The researchers employed Electrohydrodynamic (EHD) fluid as the pivotal element within a ring-shaped actuator to enable the controlled actuation of the robot. EHD fluid is a distinct category of functional fluid that can be actuated by applying a direct current (DC) voltage, which aims to shift the center of mass of the robot and push the actuator to roll.
The team designed a ring-shaped fluidic robot, manufacturing it using digital machining methods. They also developed static and dynamic models to analyze the oscillation and rolling motion of the ring-shaped robots using the Lagrange method. This modeling approach allows for a detailed understanding of the robot's behavior and can inform the design of more compact series elastic actuator modules or simplified discrete models of axisymmetric dielectric elastomer membranes for future robotic applications.
Critical Analysis
The paper presents a novel approach to actuating mobile robots using EHD fluid, which could potentially enable more flexible and adaptable robotic structures. However, the researchers acknowledge that the current prototype is limited in its capabilities and scalability. Further research is needed to optimize the design, improve the control strategies, and explore the feasibility of using EHD fluid in larger-scale robotic systems.
Additionally, the paper does not provide a comprehensive comparison to other actuation methods or discuss the potential challenges and trade-offs of using EHD fluid. It would be valuable to understand how this approach compares to more established hydraulic or pneumatic systems in terms of power density, efficiency, and ease of integration.
Overall, the research represents an interesting exploration of EHD fluid as a novel actuation mechanism, but more work is needed to fully evaluate its practical applications and limitations in the context of mobile robotics.
Conclusion
This study demonstrates the potential of using Electrohydrodynamic (EHD) fluid as a novel actuation mechanism for mobile robots with adaptable structures. The researchers designed and built a ring-shaped fluidic robot, developed models to analyze its motion, and believe this work could contribute to the expansion of research on EHD flexible actuators.
While the current prototype has limitations, the exploration of EHD fluid-based actuation opens up new avenues for designing more versatile and reconfigurable robotic systems. Further advancements in this area could lead to the development of innovative wearable roller rings or self-sensing feedback control for electrohydraulic robotic systems, expanding the capabilities of mobile robots in various applications.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
🤷
Bundling and Tumbling in Bacterial-inspired Bi-flagellated Soft Robots for Attitude Adjustment
Zhuonan Hao, Siddharth Zalavadia, Mohammad Khalid Jawed
0
0
We create a mechanism inspired by bacterial swimmers, featuring two flexible flagella with individual control over rotation speed and direction in viscous fluid environments. Using readily available materials, we design and fabricate silicone-based helical flagella. To simulate the robot's motion, we develop a physics-based computational tool, drawing inspiration from computer graphics. The framework incorporates the Discrete Elastic Rod method, modeling the flagella as Kirchhoff's elastic rods, and couples it with the Regularized Stokeslet Segments method for hydrodynamics, along with the Implicit Contact Model to handle contact. This approach effectively captures polymorphic phenomena like bundling and tumbling. Our study reveals how these emergent behaviors affect the robot's attitude angles, demonstrating its ability to self-reorient in both simulations and experiments. We anticipate that this framework will enhance our understanding of the directional change capabilities of flagellated robots, potentially stimulating further exploration on microscopic robot mobility.
5/7/2024
📈
Simplified discrete model for axisymmetric dielectric elastomer membranes with robotic applications
Zhaowei Liu, Mingchao Liu, K. Jimmy Hsia, Xiaonan Huang, Weicheng Huang
0
0
Soft robots utilizing inflatable dielectric membranes can realize intricate functionalities through the application of non-mechanical fields. However, given the current limitations in simulations, including low computational efficiency and difficulty in dealing with complex external interactions, the design and control of such soft robots often require trial and error. Thus, a novel one-dimensional (1D) discrete differential geometry (DDG)-based numerical model is developed for analyzing the highly nonlinear mechanics in axisymmetric inflatable dielectric membranes. The model captures the intricate dynamics of these membranes under both inflationary pressure and electrical stimulation. Comprehensive validations using hyperelastic benchmarks demonstrate the model's accuracy and reliability. Additionally, the focus on the electro-mechanical coupling elucidates critical insights into the membrane's behavior under varying internal pressures and electrical loads. The research further translates these findings into innovative soft robotic applications, including a spherical soft actuator, a soft circular fluid pump, and a soft toroidal gripper, where the snap-through of electroelastic membrane plays a crucial role. Our analyses reveal that the functional ranges of soft robots are amplified by the snap-through of an electroelastic membrane upon electrical stimuli. This study underscores the potential of DDG-based simulations to advance the understanding of the nonlinear mechanics of electroelastic membranes and guide the design of electroelastic actuators in soft robotics applications.
5/21/2024
🏋️
Design and Control of a Compact Series Elastic Actuator Module for Robots in MRI Scanners
Binghan He, Naichen Zhao, David Y. Guo, Charles H. Paxson, Ronald S. Fearing
0
0
In this study, we introduce a novel MRI-compatible rotary series elastic actuator module utilizing velocity-sourced ultrasonic motors for force-controlled robots operating within MRI scanners. Unlike previous MRI-compatible SEA designs, our module incorporates a transmission force sensing series elastic actuator structure, with four off-the-shelf compression springs strategically placed between the gearbox housing and the motor housing. This design features a compact size, thus expanding possibilities for a wider range of MRI robotic applications. To achieve precise torque control, we develop a controller that incorporates a disturbance observer tailored for velocity-sourced motors. This controller enhances the robustness of torque control in our actuator module, even in the presence of varying external impedance, thereby augmenting its suitability for MRI-guided medical interventions. Experimental validation demonstrates the actuator's torque control performance in both 3 Tesla MRI and non-MRI environments, achieving a settling time of 0.1 seconds and a steady-state error within 2% of its maximum output torque. Notably, our force controller exhibits consistent performance across low and high external impedance scenarios, in contrast to conventional controllers for velocity-sourced series elastic actuators, which struggle with steady-state performance under low external impedance conditions.
6/13/2024
Self-Sensing Feedback Control of an Electrohydraulic Robotic Shoulder
Clemens C. Christoph, Amirhossein Kazemipour, Michel R. Vogt, Yu Zhang, Robert K. Katzschmann
0
0
The human shoulder, with its glenohumeral joint, tendons, ligaments, and muscles, allows for the execution of complex tasks with precision and efficiency. However, current robotic shoulder designs lack the compliance and compactness inherent in their biological counterparts. A major limitation of these designs is their reliance on external sensors like rotary encoders, which restrict mechanical joint design and introduce bulk to the system. To address this constraint, we present a bio-inspired antagonistic robotic shoulder with two degrees of freedom powered by self-sensing hydraulically amplified self-healing electrostatic actuators. Our artificial muscle design decouples the high-voltage electrostatic actuation from the pair of low-voltage self-sensing electrodes. This approach allows for proprioceptive feedback control of trajectories in the task space while eliminating the necessity for any additional sensors. We assess the platform's efficacy by comparing it to a feedback control based on position data provided by a motion capture system. The study demonstrates closed-loop controllable robotic manipulators based on an inherent self-sensing capability of electrohydraulic actuators. The proposed architecture can serve as a basis for complex musculoskeletal joint arrangements.
4/8/2024