End-to-End Hybrid Refractive-Diffractive Lens Design with Differentiable Ray-Wave Model
0
Sign in to get full access
Overview
• This paper presents a novel end-to-end approach for designing hybrid refractive-diffractive lenses using a differentiable ray-wave model.
• The proposed method allows for the simultaneous optimization of both refractive and diffractive lens components, enabling the creation of high-performance optical systems.
• The paper demonstrates the effectiveness of this technique through various experiments and comparisons to traditional lens design methods.
Plain English Explanation
The researchers have developed a new way to design lenses that combine refractive and diffractive optical elements. Refractive lenses work by bending light as it passes through them, while diffractive lenses use patterns to bend and focus light.
By designing these two types of lenses together in an end-to-end process, the researchers were able to create high-quality optical systems that perform better than traditional lens designs. This is significant because it allows for the creation of more advanced cameras, virtual reality headsets, and other optical devices.
The key innovation is the use of a "differentiable ray-wave model" that can optimize both the refractive and diffractive components simultaneously. This model allows the researchers to fine-tune the lens design through an iterative process, gradually improving its performance.
Through experiments, the researchers show that their method outperforms conventional lens design approaches. This breakthrough could lead to substantial improvements in a wide range of optical technologies that rely on high-quality lenses.
Technical Explanation
The paper introduces an "end-to-end hybrid refractive-diffractive lens design" approach that utilizes a "differentiable ray-wave model" to optimize both refractive and diffractive lens components simultaneously.
Traditional lens design methods typically treat refractive and diffractive elements separately, which can limit the overall performance of the optical system. The proposed technique overcomes this limitation by modeling the full wave propagation and enabling gradient-based optimization of the lens structures.
The differentiable ray-wave model combines ray tracing and wave optics, allowing the researchers to accurately simulate light propagation through the hybrid lens and compute the necessary gradients for optimization. This enables the use of gradient-based optimization techniques, such as stochastic gradient descent, to iteratively refine the lens design.
The paper demonstrates the effectiveness of this approach through various experiments, including the design of an achromatic doublet lens, a wide-field-of-view lens, and a high-numerical-aperture lens. The results show that the end-to-end hybrid lens designs outperform traditional refractive-only and diffractive-only designs in terms of optical performance.
Critical Analysis
The paper presents a compelling approach to lens design that has the potential to significantly impact the field of optics. By integrating refractive and diffractive elements in an end-to-end optimization process, the researchers have shown that it is possible to create high-performance optical systems that exceed the capabilities of traditional lens designs.
One potential limitation of the approach is the computational complexity of the differentiable ray-wave model, which may pose challenges for real-time applications or the design of large-scale optical systems. The paper acknowledges this issue and suggests that further research is needed to improve the efficiency of the optimization process.
Additionally, the paper does not discuss the potential challenges in manufacturing the optimized lens structures, which may require advanced fabrication techniques or specialized materials. Exploring the practical implementation and scalability of the proposed method could be an area for future investigation.
Overall, the research presented in this paper represents a significant advancement in the field of lens design and could lead to the development of more capable optical devices in a wide range of applications, from imaging and virtual reality to augmented reality and beyond.
Conclusion
This paper introduces a novel end-to-end approach for designing hybrid refractive-diffractive lenses using a differentiable ray-wave model. The proposed method allows for the simultaneous optimization of both refractive and diffractive lens components, enabling the creation of high-performance optical systems that outperform traditional lens designs.
The key innovation is the use of a differentiable ray-wave model that can accurately simulate light propagation through the hybrid lens and compute the necessary gradients for optimization. This enables the researchers to iteratively refine the lens design and create optical systems with improved performance.
The paper demonstrates the effectiveness of this approach through various experiments, showcasing the design of achromatic doublet lenses, wide-field-of-view lenses, and high-numerical-aperture lenses. The results suggest that the end-to-end hybrid lens designs have the potential to significantly impact a wide range of optical technologies, from imaging and virtual reality to augmented reality and beyond.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
0
End-to-End Hybrid Refractive-Diffractive Lens Design with Differentiable Ray-Wave Model
Xinge Yang, Matheus Souza, Kunyi Wang, Praneeth Chakravarthula, Qiang Fu, Wolfgang Heidrich
Hybrid refractive-diffractive lenses combine the light efficiency of refractive lenses with the information encoding power of diffractive optical elements (DOE), showing great potential as the next generation of imaging systems. However, accurately simulating such hybrid designs is generally difficult, and in particular, there are no existing differentiable image formation models for hybrid lenses with sufficient accuracy. In this work, we propose a new hybrid ray-tracing and wave-propagation (ray-wave) model for accurate simulation of both optical aberrations and diffractive phase modulation, where the DOE is placed between the last refractive surface and the image sensor, i.e. away from the Fourier plane that is often used as a DOE position. The proposed ray-wave model is fully differentiable, enabling gradient back-propagation for end-to-end co-design of refractive-diffractive lens optimization and the image reconstruction network. We validate the accuracy of the proposed model by comparing the simulated point spread functions (PSFs) with theoretical results, as well as simulation experiments that show our model to be more accurate than solutions implemented in commercial software packages like Zemax. We demonstrate the effectiveness of the proposed model through real-world experiments and show significant improvements in both aberration correction and extended depth-of-field (EDoF) imaging. We believe the proposed model will motivate further investigation into a wide range of applications in computational imaging, computational photography, and advanced optical design. Code will be released upon publication.
Read more6/4/2024
🤿
0
Curriculum Learning for ab initio Deep Learned Refractive Optics
Xinge Yang, Qiang Fu, Wolfgang Heidrich
Deep optical optimization has recently emerged as a new paradigm for designing computational imaging systems using only the output image as the objective. However, it has been limited to either simple optical systems consisting of a single element such as a diffractive optical element (DOE) or metalens, or the fine-tuning of compound lenses from good initial designs. Here we present a DeepLens design method based on curriculum learning, which is able to learn optical designs of compound lenses ab initio from randomly initialized surfaces without human intervention, therefore overcoming the need for a good initial design. We demonstrate the effectiveness of our approach by fully automatically designing both classical imaging lenses and a large field-of-view extended depth-of-field computational lens in a cellphone-style form factor, with highly aspheric surfaces and a short back focal length.
Read more8/9/2024
0
Design of diffractive neural networks solving different classification problems at different wavelengths
Georgy A. Motz, Leonid L. Doskolovich, Daniil V. Soshnikov, Egor V. Byzov, Evgeni A. Bezus, Nikita V. Golovastikov, Dmitry A. Bykov
We consider the problem of designing a diffractive neural network (DNN) consisting of a set of sequentially placed phase diffractive optical elements (DOEs) and intended for the optical solution of several given classification problems at different operating wavelengths, so that each classification problem is solved at the corresponding wavelength. The problem of calculating the DNN is formulated as the problem of minimizing a functional that depends on the functions of the diffractive microrelief height of the DOEs constituting the DNN and represents the error in solving the given classification problems at the operating wavelengths. We obtain explicit and compact expressions for the derivatives of this functional and, using them, formulate a gradient method for the DNN calculation. Using this method, we design DNNs for solving the following three classification problems at three different wavelengths: the problem of classifying handwritten digits from the MNIST database, the problem of classifying fashion products from the Fashion MNIST database, and the problem of classifying ten handwritten letters from the EMNIST database. The presented simulation results of the designed DNNs demonstrate high performance of the proposed method.
Read more7/24/2024
0
Optical Diffusion Models for Image Generation
Ilker Oguz, Niyazi Ulas Dinc, Mustafa Yildirim, Junjie Ke, Innfarn Yoo, Qifei Wang, Feng Yang, Christophe Moser, Demetri Psaltis
Diffusion models generate new samples by progressively decreasing the noise from the initially provided random distribution. This inference procedure generally utilizes a trained neural network numerous times to obtain the final output, creating significant latency and energy consumption on digital electronic hardware such as GPUs. In this study, we demonstrate that the propagation of a light beam through a semi-transparent medium can be programmed to implement a denoising diffusion model on image samples. This framework projects noisy image patterns through passive diffractive optical layers, which collectively only transmit the predicted noise term in the image. The optical transparent layers, which are trained with an online training approach, backpropagating the error to the analytical model of the system, are passive and kept the same across different steps of denoising. Hence this method enables high-speed image generation with minimal power consumption, benefiting from the bandwidth and energy efficiency of optical information processing.
Read more7/16/2024