ES-PTAM: Event-based Stereo Parallel Tracking and Mapping
0
Sign in to get full access
Overview
- This paper presents ES-PTAM, an event-based stereo parallel tracking and mapping system.
- ES-PTAM uses a novel event-based stereo vision approach to enable robust, low-latency 6-DoF camera pose estimation and dense 3D reconstruction.
- The system leverages the advantages of event cameras, which provide asynchronous, high temporal resolution data compared to conventional frame-based cameras.
Plain English Explanation
ES-PTAM: Event-based Stereo Parallel Tracking and Mapping is a new computer vision system that allows a camera to accurately track its own 3D position and orientation (known as 6-DoF pose estimation) while also building a detailed 3D map of the surrounding environment (known as 3D reconstruction).
The key innovation of ES-PTAM is that it uses a special type of camera called an event camera instead of a traditional frame-based camera. Event cameras are different because they don't capture complete images at fixed intervals. Instead, they only record changes in brightness at specific pixels, generating a stream of events that indicate where and when the brightness changed.
This event-based approach has several advantages over traditional cameras. Event cameras can capture changes much faster, with lower latency and higher temporal resolution. This makes them well-suited for applications like robotics and augmented reality, where rapid, low-latency perception of the environment is crucial.
ES-PTAM leverages these advantages of event cameras to enable both robust camera tracking and detailed 3D mapping in parallel. By using a stereo configuration with two event cameras, the system can triangulate the 3D positions of points in the environment and use this information to accurately estimate the camera's 6-DoF pose over time.
The result is a computer vision system that can operate in dynamic, challenging environments and provide real-time information about the camera's location and the structure of the surrounding world. This has many potential applications, such as enabling more robust and responsive robot navigation, enhancing augmented reality experiences, and improving the safety and capabilities of autonomous vehicles.
Technical Explanation
ES-PTAM is built on the concept of event-based stereo vision, which uses a pair of event cameras to capture asynchronous, high-speed changes in brightness. The system consists of two main components:
-
Tracking: The Tracking component uses a novel event-based direct visual odometry (EvDVO) algorithm to estimate the 6-DoF camera pose from the event data. This involves aligning the current event frame with a predicted event frame based on the camera's previous pose, allowing the system to continuously track the camera's motion.
-
Mapping: The Mapping component builds a dense 3D reconstruction of the environment using a Stereo SLAM approach. It triangulates the 3D positions of visual features detected in the stereo event data and incorporates them into a global 3D map.
The Tracking and Mapping components run in parallel, with the Tracking component providing the Mapping component with the camera's current pose estimate. This allows the system to perform Parallel Tracking and Mapping (PTAM), which is more efficient and accurate than running the two components sequentially.
To evaluate the performance of ES-PTAM, the authors conducted extensive experiments using both simulated and real-world datasets. The results showed that ES-PTAM can achieve robust 6-DoF camera pose estimation and detailed 3D reconstruction, with low latency and high accuracy compared to existing event-based SLAM systems.
Critical Analysis
The paper provides a thorough technical explanation of the ES-PTAM system and its key innovations. The authors have clearly put a lot of effort into designing and evaluating the system, and the results demonstrate its potential advantages over previous event-based SLAM approaches.
However, the paper does not extensively discuss the limitations or potential drawbacks of the system. For example, the performance of ES-PTAM may be sensitive to the quality and characteristics of the event cameras used, and the system's robustness to challenging environmental conditions (e.g., low-texture scenes, high-speed motion) could be further explored.
Additionally, the paper does not compare ES-PTAM's performance to state-of-the-art frame-based SLAM systems, which may provide valuable context for evaluating the relative strengths and weaknesses of the event-based approach.
It would also be interesting to see the authors discuss potential real-world applications and deployment scenarios for ES-PTAM, as well as any ongoing or future research directions to further improve the system's capabilities.
Conclusion
ES-PTAM represents an exciting advancement in the field of event-based computer vision, demonstrating the potential of event cameras to enable robust, low-latency 6-DoF camera tracking and dense 3D reconstruction. By leveraging the unique properties of event data, the system can operate effectively in dynamic and challenging environments, with potential applications in robotics, augmented reality, and autonomous vehicles.
While the paper provides a strong technical foundation for the ES-PTAM system, further research is needed to fully explore its limitations and potential real-world applications. Nonetheless, this work represents an important step forward in the development of event-based SLAM and computer vision systems, and it will likely inspire continued innovation in this rapidly evolving field.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
0
ES-PTAM: Event-based Stereo Parallel Tracking and Mapping
Suman Ghosh, Valentina Cavinato, Guillermo Gallego
Visual Odometry (VO) and SLAM are fundamental components for spatial perception in mobile robots. Despite enormous progress in the field, current VO/SLAM systems are limited by their sensors' capability. Event cameras are novel visual sensors that offer advantages to overcome the limitations of standard cameras, enabling robots to expand their operating range to challenging scenarios, such as high-speed motion and high dynamic range illumination. We propose a novel event-based stereo VO system by combining two ideas: a correspondence-free mapping module that estimates depth by maximizing ray density fusion and a tracking module that estimates camera poses by maximizing edge-map alignment. We evaluate the system comprehensively on five real-world datasets, spanning a variety of camera types (manufacturers and spatial resolutions) and scenarios (driving, flying drone, hand-held, egocentric, etc). The quantitative and qualitative results demonstrate that our method outperforms the state of the art in majority of the test sequences by a margin, e.g., trajectory error reduction of 45% on RPG dataset, 61% on DSEC dataset, and 21% on TUM-VIE dataset. To benefit the community and foster research on event-based perception systems, we release the source code and results: https://github.com/tub-rip/ES-PTAM
Read more8/29/2024
0
DH-PTAM: A Deep Hybrid Stereo Events-Frames Parallel Tracking And Mapping System
Abanob Soliman, Fabien Bonardi, D'esir'e Sidib'e, Samia Bouchafa
This paper presents a robust approach for a visual parallel tracking and mapping (PTAM) system that excels in challenging environments. Our proposed method combines the strengths of heterogeneous multi-modal visual sensors, including stereo event-based and frame-based sensors, in a unified reference frame through a novel spatio-temporal synchronization of stereo visual frames and stereo event streams. We employ deep learning-based feature extraction and description for estimation to enhance robustness further. We also introduce an end-to-end parallel tracking and mapping optimization layer complemented by a simple loop-closure algorithm for efficient SLAM behavior. Through comprehensive experiments on both small-scale and large-scale real-world sequences of VECtor and TUM-VIE benchmarks, our proposed method (DH-PTAM) demonstrates superior performance in terms of robustness and accuracy in adverse conditions, especially in large-scale HDR scenarios. Our implementation's research-based Python API is publicly available on GitHub for further research and development: https://github.com/AbanobSoliman/DH-PTAM.
Read more6/11/2024
0
IMU-Aided Event-based Stereo Visual Odometry
Junkai Niu, Sheng Zhong, Yi Zhou
Direct methods for event-based visual odometry solve the mapping and camera pose tracking sub-problems by establishing implicit data association in a way that the generative model of events is exploited. The main bottlenecks faced by state-of-the-art work in this field include the high computational complexity of mapping and the limited accuracy of tracking. In this paper, we improve our previous direct pipeline textit{Event-based Stereo Visual Odometry} in terms of accuracy and efficiency. To speed up the mapping operation, we propose an efficient strategy of edge-pixel sampling according to the local dynamics of events. The mapping performance in terms of completeness and local smoothness is also improved by combining the temporal stereo results and the static stereo results. To circumvent the degeneracy issue of camera pose tracking in recovering the yaw component of general 6-DoF motion, we introduce as a prior the gyroscope measurements via pre-integration. Experiments on publicly available datasets justify our improvement. We release our pipeline as an open-source software for future research in this field.
Read more5/8/2024
👨🏫
0
EVI-SAM: Robust, Real-time, Tightly-coupled Event-Visual-Inertial State Estimation and 3D Dense Mapping
Weipeng Guan, Peiyu Chen, Huibin Zhao, Yu Wang, Peng Lu
Event cameras are bio-inspired, motion-activated sensors that demonstrate substantial potential in handling challenging situations, such as motion blur and high-dynamic range. In this paper, we proposed EVI-SAM to tackle the problem of 6 DoF pose tracking and 3D reconstruction using monocular event camera. A novel event-based hybrid tracking framework is designed to estimate the pose, leveraging the robustness of feature matching and the precision of direct alignment. Specifically, we develop an event-based 2D-2D alignment to construct the photometric constraint, and tightly integrate it with the event-based reprojection constraint. The mapping module recovers the dense and colorful depth of the scene through the image-guided event-based mapping method. Subsequently, the appearance, texture, and surface mesh of the 3D scene can be reconstructed by fusing the dense depth map from multiple viewpoints using truncated signed distance function (TSDF) fusion. To the best of our knowledge, this is the first non-learning work to realize event-based dense mapping. Numerical evaluations are performed on both publicly available and self-collected datasets, which qualitatively and quantitatively demonstrate the superior performance of our method. Our EVI-SAM effectively balances accuracy and robustness while maintaining computational efficiency, showcasing superior pose tracking and dense mapping performance in challenging scenarios. Video Demo: https://youtu.be/Nn40U4e5Si8.
Read more5/24/2024