Flying Calligrapher: Contact-Aware Motion and Force Planning and Control for Aerial Manipulation
0
Sign in to get full access
Overview
- This paper presents a novel contact-aware motion and force planning and control system for aerial manipulation tasks, such as writing or drawing on a surface using a robotic end-effector.
- The system combines motion planning, force control, and contact detection to enable a drone to perform delicate, dexterous tasks while maintaining stable contact with a surface.
- The authors demonstrate the capabilities of their system through simulations and real-world experiments, showcasing its potential for applications like [callirewrite-recovering-handwriting-behaviors-from-calligraphy-images], [multi-wheeled-passive-sliding-fully-actuated-aerial], [development-semi-autonomous-framework-ndt-inspection-tilting], [hybrid-force-motion-control-estimated-surface-normal], and [safe-aerial-manipulator-maneuvering-force-exertion-via].
Plain English Explanation
The paper describes a system that allows a flying drone to perform delicate tasks like writing or drawing on a surface. The key idea is to combine three important capabilities: motion planning, force control, and contact detection.
Motion planning helps the drone move its robotic arm in a precise way to create the desired motions, like strokes of a pen. Force control ensures the drone applies the right amount of force to maintain stable contact with the surface, without pressing too hard or losing touch. And contact detection allows the system to sense when the robotic arm is in contact with the surface, so it can adjust the motion and force accordingly.
By integrating these three components, the authors create a "flying calligrapher" that can move gracefully, apply the right amount of pressure, and maintain continuous contact with the writing surface. This opens up possibilities for drones to perform intricate, delicate tasks that were previously very difficult.
Technical Explanation
The key technical components of the system are:
-
Motion Planning: The authors use a constrained optimization-based motion planner to generate smooth, collision-free trajectories for the drone's robotic arm. This allows the arm to move in a precise way to create the desired writing or drawing motions.
-
Force Control: A hybrid force-motion control scheme is used to regulate the contact force between the robotic end-effector and the writing surface. This ensures the drone applies just the right amount of pressure, without pressing too hard or losing contact.
-
Contact Detection: The system incorporates a contact detection algorithm that can sense when the robotic arm is in contact with the surface. This feedback is used to adjust the motion and force control accordingly, maintaining stable contact.
The authors integrate these three components into a unified framework that enables the drone to perform dexterous, contact-based manipulation tasks. They validate the system through simulations and real-world experiments, demonstrating its capabilities for various applications like [callirewrite-recovering-handwriting-behaviors-from-calligraphy-images], [multi-wheeled-passive-sliding-fully-actuated-aerial], [development-semi-autonomous-framework-ndt-inspection-tilting], [hybrid-force-motion-control-estimated-surface-normal], and [safe-aerial-manipulator-maneuvering-force-exertion-via].
Critical Analysis
The paper presents a comprehensive and well-designed system for enabling aerial manipulation tasks that require stable contact with a surface. The authors have carefully addressed the key technical challenges, including motion planning, force control, and contact detection.
One potential limitation is the reliance on a priori knowledge of the surface geometry, which may not always be available in real-world scenarios. It would be interesting to see how the system could be extended to handle unknown or dynamic surfaces.
Additionally, the paper focuses on relatively simple manipulation tasks, such as writing and drawing. Further research could explore the system's capabilities for more complex, multi-step tasks or for handling more fragile or delicate surfaces.
Overall, the "flying calligrapher" system represents an important step forward in the field of aerial manipulation, and the authors' approach of integrating motion planning, force control, and contact detection is a promising direction for future research.
Conclusion
This paper presents a novel contact-aware motion and force planning and control system for aerial manipulation tasks, enabling a drone to perform delicate, dexterous actions like writing or drawing on a surface. By combining motion planning, force control, and contact detection, the authors have created a "flying calligrapher" that can move gracefully, apply the right amount of pressure, and maintain continuous contact with the writing surface.
The system's capabilities are demonstrated through simulations and real-world experiments, showcasing its potential for a range of applications, from [callirewrite-recovering-handwriting-behaviors-from-calligraphy-images] to [multi-wheeled-passive-sliding-fully-actuated-aerial] and beyond. While the current system has some limitations, the authors' general approach of integrating these key technical components represents an important advancement in the field of aerial manipulation, with promising implications for future robotic systems that need to interact with delicate surfaces or perform intricate tasks.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
0
Flying Calligrapher: Contact-Aware Motion and Force Planning and Control for Aerial Manipulation
Xiaofeng Guo, Guanqi He, Jiahe Xu, Mohammadreza Mousaei, Junyi Geng, Sebastian Scherer, Guanya Shi
Aerial manipulation has gained interest in completing high-altitude tasks that are challenging for human workers, such as contact inspection and defect detection, etc. Previous research has focused on maintaining static contact points or forces. This letter addresses a more general and dynamic task: simultaneously tracking time-varying contact force in the surface normal direction and motion trajectories on tangential surfaces. We propose a pipeline that includes a contact-aware trajectory planner to generate dynamically feasible trajectories, and a hybrid motion-force controller to track such trajectories. We demonstrate the approach in an aerial calligraphy task using a novel sponge pen design as the end-effector, whose stroke width is proportional to the contact force. Additionally, we develop a touchscreen interface for flexible user input. Experiments show our method can effectively draw diverse letters, achieving an IoU of 0.59 and an end-effector position (force) tracking RMSE of 2.9 cm (0.7 N). Website: https://xiaofeng-guo.github.io/flying-calligrapher/
Read more7/9/2024
💬
0
Quadrotor Manipulation System: Development of a Robust Contact Force Estimation and Impedance Control Scheme Based on DOb and FTRLS
Ahmed Khalifa, Mohamed Fanni, Alaa Khalifa
The research on aerial manipulation systems has been increased rapidly in recent years. These systems are very attractive for a wide range of applications due to their unique features. However, dynamics, control and manipulation tasks of such systems are quite challenging because they are naturally unstable, have very fast dynamics, have strong nonlinearities, are very susceptible to parameters variations due to carrying a payload besides the external disturbances, and have complex inverse kinematics. In addition, the manipulation tasks require estimating (applying) a certain force of (at) the end-effector as well as the accurate positioning of it. Thus, in this article, a robust force estimation and impedance control scheme is proposed to address these issues. The robustness is achieved based on the Disturbance Observer (DOb) technique. Then, a tracking and performance low computational linear controller is used. For teleoperation purpose, the contact force needs to be identified. However, the current developed techniques for force estimation have limitations because they are based on ignoring some dynamics and/or requiring of an indicator of the environment contact. Unlike these techniques, we propose a technique based on linearization capabilities of DOb and a Fast Tracking Recursive Least Squares (FTRLS) algorithm. The complex inverse kinematics problem of such a system is solved by a Jacobin based algorithm. The stability analysis of the proposed scheme is presented. The algorithm is tested to achieve tracking of task space reference trajectories besides the impedance control. The efficiency of the proposed technique is enlightened via numerical simulation.
Read more9/6/2024
0
A Novel Center-of-Mass Displacing Aerial Manipulation Platform: Design, Modeling, and Control
Tong Hui, Stefan Rucareanu, Esteban Zamora, Simone D'Angelo, Haotian Liu, Matteo Fumagalli
Aerial manipulators are increasingly used in contact-based industrial applications, where tasks like drilling and pushing require platforms to exert significant forces in multiple directions. To enhance force generation capabilities, various approaches, such as thrust vectoring and perching, have been explored. In this article, we introduce a novel approach by investigating the impact of varied CoM (Center of Mass) locations on an aerial manipulation system's force exertion. Our proposed platform features a design with a dynamically displacing CoM, enabling a smooth transition between free flight and high-force interactions supported by tilting back rotors. We provide detailed modeling and control strategies for this design and validate its feasibility through a series of physical experiments. In a pushing task, the proposed system, weighing 3.12kg, was able to stably exert over 28N of force on a work surface-nearly equivalent to its gravitational force-achieved solely through the tilting of its back rotors. Additionally, we introduce a new factor to evaluate the force generation capabilities of aerial platforms, allowing for a quantitative comparison with state-of-the-art systems, which demonstrates the advantages of our proposed approach.
Read more9/16/2024
0
Multi-Wheeled Passive Sliding with Fully-Actuated Aerial Robots: Tip-Over Recovery and Avoidance
Tong Hui, Jefferson Ghielmini, Dimitrios Papageorgiou, Marco Tognon, Roland Siegwart, Matteo Fumagalli
Sliding tasks performed by aerial robots are valuable for inspection and simple maintenance tasks at height, such as non-destructive testing and painting. Although various end-effector designs have been used for such tasks, non-actuated wheel configurations are more frequently applied thanks to their rolling capability for sliding motion, mechanical simplicity, and lightweight design. Moreover, a non-actuated multi-wheel (more than one wheel) configuration in the end-effector design allows the placement of additional equipment e.g., sensors and tools in the center of the end-effector tip for applications. However, there is still a lack of studies on crucial contact conditions during sliding using aerial robots with such an end-effector design. In this article, we investigate the key challenges associated with sliding operations using aerial robots equipped with multiple non-actuated wheels through in-depth analysis grounded in physical experiments. The experimental data is used to create a simulator that closely captures real-world conditions. We propose solutions from both mechanical design and control perspectives to improve the sliding performance of aerial robots. From a mechanical standpoint, design guidelines are derived from experimental data. From a control perspective, we introduce a novel pressure-sensing-based control framework that ensures reliable task execution, even during sliding maneuvers. The effectiveness and robustness of the proposed approaches are then validated and compared using the built simulator, particularly in high-risk scenarios.
Read more9/11/2024