Machine Learning Driven Global Optimisation Framework for Analog Circuit Design
2404.02911
0
0
Abstract
We propose a machine learning-driven optimisation framework for analog circuit design in this paper. The primary objective is to determine the device sizes for the optimal performance of analog circuits for a given set of specifications. Our methodology entails employing machine learning models and spice simulations to direct the optimisation algorithm towards achieving the optimal design for analog circuits. Machine learning based global offline surrogate models, with the circuit design parameters as the input, are built in the design space for the analog circuits under study and is used to guide the optimisation algorithm, resulting in faster convergence and a reduced number of spice simulations. Multi-layer perceptron and random forest regressors are employed to predict the required design specifications of the analog circuit. Since the saturation condition of transistors is vital in the proper working of analog circuits, multi-layer perceptron classifiers are used to predict the saturation condition of each transistor in the circuit. The feasibility of the candidate solutions is verified using machine learning models before invoking spice simulations. We validate the proposed framework using three circuit topologies--a bandgap reference, a folded cascode operational amplifier, and a two-stage operational amplifier. The simulation results show better optimum values and lower standard deviations for fitness functions after convergence. Incorporating the machine learning-based predictions proposed in the optimisation method has resulted in the reduction of spice calls by 56%, 59%, and 83% when compared with standard approaches in the three test cases considered in the study.
Create account to get full access
Overview
- Presents a machine learning-driven global optimization framework for analog circuit design
- Leverages a genetic algorithm and neural networks to optimize circuit performance
- Aims to improve efficiency and effectiveness of the analog circuit design process
Plain English Explanation
This paper describes a new approach to designing analog circuits using machine learning techniques. Analog circuits are an essential component in many electronic devices, but designing them can be a complex and time-consuming process. The researchers have developed a framework that combines a genetic algorithm and neural networks to optimize the circuit design in a more efficient and effective way.
The genetic algorithm is used to explore a wide range of potential circuit configurations, while the neural networks are trained to predict the performance of each design. By iterating between the genetic algorithm and the neural networks, the framework can converge on an optimal circuit design that meets the desired specifications.
<a href="https://aimodels.fyi/papers/arxiv/enhancing-multi-objective-optimization-through-machine-learning">This approach builds on previous work in using machine learning to enhance multi-objective optimization</a>, and <a href="https://aimodels.fyi/papers/arxiv/enhancing-functional-safety-automotive-ams-circuits-through">has applications in improving the functional safety of automotive analog and mixed-signal circuits</a>. The key idea is to leverage the strengths of both machine learning and evolutionary optimization to streamline the analog circuit design process.
Technical Explanation
The proposed framework consists of two main components: a genetic algorithm and a neural network-based performance predictor. The genetic algorithm is used to explore a large design space, generating and evaluating a population of candidate circuit designs. The neural network is trained on a set of labeled design samples to predict the performance of new circuit configurations.
<a href="https://aimodels.fyi/papers/arxiv/high-performance-real-world-optical-computing-trained">The neural network is trained using a dataset of known circuit designs and their corresponding performance metrics</a>. This allows the framework to quickly estimate the performance of new circuit designs without having to physically implement and test them.
The genetic algorithm and neural network work together in an iterative loop. The genetic algorithm generates new candidate designs, which are then evaluated by the neural network. The results of this evaluation are used to guide the next generation of designs, with the goal of converging on an optimal circuit configuration.
<a href="https://aimodels.fyi/papers/arxiv/neural-network-based-approach-to-hybrid-systems">This neural network-based approach to hybrid systems optimization</a> has been shown to be effective in a variety of engineering domains, and the researchers believe it can provide significant benefits in the context of analog circuit design as well.
Critical Analysis
The paper presents a promising approach to analog circuit design, but it is important to consider some potential limitations and areas for further research.
One key limitation is the reliance on the availability of a large, high-quality dataset of labeled circuit designs. In practice, obtaining such a dataset may be challenging, especially for novel circuit topologies or designs targeting specialized applications.
<a href="https://aimodels.fyi/papers/arxiv/financial-risk-management-neutral-atom-quantum-processor">Additionally, the performance of the neural network-based predictor may be sensitive to the quality and representativeness of the training data, which could impact the overall effectiveness of the framework</a>.
Further research could explore ways to reduce the reliance on extensive training data, such as through the use of transfer learning or meta-learning techniques. Investigating the scalability of the framework to handle more complex circuit designs would also be valuable.
Conclusion
This paper presents a novel machine learning-driven global optimization framework for analog circuit design. By combining genetic algorithms and neural networks, the framework aims to streamline the design process and improve the efficiency and effectiveness of analog circuit development.
The key innovation is the use of neural networks to rapidly predict the performance of candidate circuit designs, allowing the genetic algorithm to explore a wider design space and converge on optimal solutions more quickly. This approach has the potential to significantly impact the field of analog circuit design, particularly in domains where rapid optimization and performance tuning are critical, such as in automotive electronics or high-frequency communications systems.
While the framework shows promise, further research is needed to address potential limitations, such as the reliance on large training datasets. Overall, this work demonstrates the power of integrating machine learning techniques with traditional optimization methods to tackle complex engineering challenges.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
Fast ML-driven Analog Circuit Layout using Reinforcement Learning and Steiner Trees
Davide Basso, Luca Bortolussi, Mirjana Videnovic-Misic, Husni Habal
0
0
This paper presents an artificial intelligence driven methodology to reduce the bottleneck often encountered in the analog ICs layout phase. We frame the floorplanning problem as a Markov Decision Process and leverage reinforcement learning for automatic placement generation under established topological constraints. Consequently, we introduce Steiner tree-based methods for the global routing step and generate guiding paths to be used to connect every circuit block. Finally, by integrating these solutions into a procedural generation framework, we present a unified pipeline that bridges the divide between circuit design and verification steps. Experimental results demonstrate the efficacy in generating complete layouts, eventually reducing runtimes to 1.5% compared to manual efforts.
5/28/2024
New!ADO-LLM: Analog Design Bayesian Optimization with In-Context Learning of Large Language Models
Yuxuan Yin, Yu Wang, Boxun Xu, Peng Li
0
0
Analog circuit design requires substantial human expertise and involvement, which is a significant roadblock to design productivity. Bayesian Optimization (BO), a popular machine learning based optimization strategy, has been leveraged to automate analog design given its applicability across various circuit topologies and technologies. Traditional BO methods employ black box Gaussian Process surrogate models and optimized labeled data queries to find optimization solutions by trading off between exploration and exploitation. However, the search for the optimal design solution in BO can be expensive from both a computational and data usage point of view, particularly for high dimensional optimization problems. This paper presents ADO-LLM, the first work integrating large language models (LLMs) with Bayesian Optimization for analog design optimization. ADO-LLM leverages the LLM's ability to infuse domain knowledge to rapidly generate viable design points to remedy BO's inefficiency in finding high value design areas specifically under the limited design space coverage of the BO's probabilistic surrogate model. In the meantime, sampling of design points evaluated in the iterative BO process provides quality demonstrations for the LLM to generate high quality design points while leveraging infused broad design knowledge. Furthermore, the diversity brought by BO's exploration enriches the contextual understanding of the LLM and allows it to more broadly search in the design space and prevent repetitive and redundant suggestions. We evaluate the proposed framework on two different types of analog circuits and demonstrate notable improvements in design efficiency and effectiveness.
6/28/2024
🛸
AnalogCoder: Analog Circuit Design via Training-Free Code Generation
Yao Lai, Sungyoung Lee, Guojin Chen, Souradip Poddar, Mengkang Hu, David Z. Pan, Ping Luo
0
0
Analog circuit design is a significant task in modern chip technology, focusing on the selection of component types, connectivity, and parameters to ensure proper circuit functionality. Despite advances made by Large Language Models (LLMs) in digital circuit design, the complexity and scarcity of data in analog circuitry pose significant challenges. To mitigate these issues, we introduce AnalogCoder, the first training-free LLM agent for designing analog circuits through Python code generation. Firstly, AnalogCoder incorporates a feedback-enhanced flow with tailored domain-specific prompts, enabling the automated and self-correcting design of analog circuits with a high success rate. Secondly, it proposes a circuit tool library to archive successful designs as reusable modular sub-circuits, simplifying composite circuit creation. Thirdly, extensive experiments on a benchmark designed to cover a wide range of analog circuit tasks show that AnalogCoder outperforms other LLM-based methods. It has successfully designed 20 circuits, 5 more than standard GPT-4o. We believe AnalogCoder can significantly improve the labor-intensive chip design process, enabling non-experts to design analog circuits efficiently.
5/31/2024
Enhancing Multi-Objective Optimization through Machine Learning-Supported Multiphysics Simulation
Diego Botache, Jens Decke, Winfried Ripken, Abhinay Dornipati, Franz Gotz-Hahn, Mohamed Ayeb, Bernhard Sick
0
0
This paper presents a methodological framework for training, self-optimising, and self-organising surrogate models to approximate and speed up multiobjective optimisation of technical systems based on multiphysics simulations. At the hand of two real-world datasets, we illustrate that surrogate models can be trained on relatively small amounts of data to approximate the underlying simulations accurately. Including explainable AI techniques allow for highlighting feature relevancy or dependencies and supporting the possible extension of the used datasets. One of the datasets was created for this paper and is made publicly available for the broader scientific community. Extensive experiments combine four machine learning and deep learning algorithms with an evolutionary optimisation algorithm. The performance of the combined training and optimisation pipeline is evaluated by verifying the generated Pareto-optimal results using the ground truth simulations. The results from our pipeline and a comprehensive evaluation strategy show the potential for efficiently acquiring solution candidates in multiobjective optimisation tasks by reducing the number of simulations and conserving a higher prediction accuracy, i.e., with a MAPE score under 5% for one of the presented use cases.
4/4/2024