Mathematical Modeling Of Four Finger Robotic Grippers
0
🤯
Sign in to get full access
Overview
- Robotic grippers are the end effectors used in robot systems for industrial and hazardous tasks.
- This paper focuses on the mathematical modeling of a multi-finger robotic gripper called the Jamia's hand, developed at the Robotics Lab at Jamia Millia Islamia in India.
- The Jamia's hand is a tendon-driven gripper with three fingers and a thumb, each having one degree of freedom, for a total of 11 degrees of freedom.
- The power transmission mechanism is a rope and pulley system, and the gripper is made of aluminum from the 5083 family.
- The paper analyzes the kinematics, force, and dynamics of the four-finger gripper and its thumb, focusing on the control of motion in the X and Y displacements and the angular positions.
Plain English Explanation
The paper describes the development of a mathematical model for a multi-finger robotic gripper, called the Jamia's hand, which was created by researchers at Jamia Millia Islamia in India. This gripper is designed to be used in industrial and hazardous tasks, where robots need to be able to grip and manipulate objects.
The Jamia's hand has three fingers and a thumb, each with one degree of freedom, for a total of 11 degrees of freedom. This means the gripper can move and position the fingers and thumb in various ways to grasp different objects. The power transmission mechanism uses a rope and pulley system, and the gripper is made of a lightweight aluminum alloy.
The researchers developed a mathematical model to analyze the kinematics (the motion and positioning) of the gripper, as well as the forces and dynamics involved in its operation. This includes looking at how the gripper's fingers and thumb can move in the X and Y directions, and how the angular positions of the joints change.
The researchers also analyzed the grasping force the gripper can apply, the maximum weight it can lift, and the torque required to move the fingers and thumb. They found that the gripper's behavior is linear (predictable) up to a certain force, and then becomes nonlinear (more complex) beyond that point.
Overall, this research provides a detailed mathematical understanding of how this multi-finger robotic gripper works, which can help in the design and control of such grippers for industrial and other applications.
Technical Explanation
The paper presents a mathematical model for a multi-finger robotic gripper called the Jamia's hand, which was developed by the Robotics Lab at Jamia Millia Islamia in India.
The Jamia's hand is a tendon-driven gripper with three fingers and a thumb, each having one degree of freedom, for a total of 11 degrees of freedom. The power transmission mechanism is a rope and pulley system, and the gripper is made of aluminum from the 5083 family.
The researchers performed a kinematic, force, and dynamic analysis of the four-finger gripper and its thumb. They focused on the control of motion in the X and Y displacements and the angular positions.
The force analysis determined the maximum weight, force, and torque required to move the gripper. The researchers found that the force-displacement graph showed linear behavior up to 250 N and nonlinear behavior beyond that. They also calculated the minimum wire diameter of 0.86 mm required to grasp a maximum 1 kg load.
Additionally, the researchers developed a dynamic model using the Lagrangian energy approach to find the torque required to move the fingers.
Critical Analysis
The paper provides a comprehensive mathematical model for the Jamia's hand, a multi-finger robotic gripper, which can be useful for the design and control of such grippers for industrial and other applications.
However, the paper does not discuss any potential limitations or caveats of the model, such as the assumptions made or the range of applicability. Additionally, the dynamic model developed using the Lagrangian approach is not validated against experimental data, which would be important to ensure the accuracy of the model.
Furthermore, the paper does not explore the grasping and manipulation capabilities of the Jamia's hand in real-world scenarios, such as the types of objects it can grasp or the tasks it can perform. This information would be valuable for assessing the practical utility of the gripper.
Conclusion
This paper presents a mathematical model for a multi-finger robotic gripper called the Jamia's hand, developed by researchers at Jamia Millia Islamia in India. The model provides a detailed understanding of the kinematics, force, and dynamics of the gripper, which can inform the design and control of such grippers for industrial and other applications. However, the paper lacks discussion of potential limitations and the real-world grasping and manipulation capabilities of the Jamia's hand, which would be important considerations for the practical use of this technology.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
🤯
0
Mathematical Modeling Of Four Finger Robotic Grippers
Sajjad Hussain, M. Suhaib
Robotic grippers are the end effector in the robot system of handling any task which used for performing various operations for the purpose of industrial application and hazardous tasks.In this paper, we developed the mathematical model for multi fingers robotics grippers. we are concerned with Jamia'shand which is developed in Robotics Lab, Mechanical Engineering Deptt, Faculty of Engg & Technolgy, Jamia Millia Islamia, India. This is a tendon-driven gripper each finger having three DOF having a total of 11 DOF. The term tendon is widely used to imply belts, cables, or similar types of applications. It is made up of three fingers and a thumb. Every finger and thumb has one degree of freedom. The power transmission mechanism is a rope and pulley system. Both hands have similar structures. Aluminum from the 5083 families was used to make this product. The gripping force can be adjusted we have done the kinematics, force, and dynamic analysis by developing a Mathematical model for the four-finger robotics grippers and their thumb. we focused it control motions in X and Y Displacements with the angular positions movements and we make the force analysis of the four fingers and thumb calculate the maximum weight, force, and torque required to move it with mass. Draw the force -displacements graph which shows the linear behavior up to 250 N and shows nonlinear behavior beyond this. and required Dmin of wire is 0.86 mm for grasping the maximum 1 kg load also developed the dynamic model (using energy )approach lagrangian method to find it torque required to move the fingers.
Read more9/11/2024
0
Identification and validation of the dynamic model of a tendon-driven anthropomorphic finger
Junnan Li, Lingyun Chen, Johannes Ringwald, Edmundo Pozo Fortunic, Amartya Ganguly, Sami Haddadin
This study addresses the absence of an identification framework to quantify a comprehensive dynamic model of human and anthropomorphic tendon-driven fingers, which is necessary to investigate the physiological properties of human fingers and improve the control of robotic hands. First, a generalized dynamic model was formulated, which takes into account the inherent properties of such a mechanical system. This includes rigid-body dynamics, coupling matrix, joint viscoelasticity, and tendon friction. Then, we propose a methodology comprising a series of experiments, for step-wise identification and validation of this dynamic model. Moreover, an experimental setup was designed and constructed that features actuation modules and peripheral sensors to facilitate the identification process. To verify the proposed methodology, a 3D-printed robotic finger based on the index finger design of the Dexmart hand was developed, and the proposed experiments were executed to identify and validate its dynamic model. This study could be extended to explore the identification of cadaver hands, aiming for a consistent dataset from a single cadaver specimen to improve the development of musculoskeletal hand models.
Read more8/26/2024
0
In-Hand Singulation and Scooping Manipulation with a 5 DOF Tactile Gripper
Yuhao Zhou, Pokuang Zhou, Shaoxiong Wang, Yu She
Manipulation tasks often require a high degree of dexterity, typically necessitating grippers with multiple degrees of freedom (DoF). While a robotic hand equipped with multiple fingers can execute precise and intricate manipulation tasks, the inherent redundancy stemming from its extensive DoF often adds unnecessary complexity. In this paper, we introduce the design of a tactile sensor-equipped gripper with two fingers and five DoF. We present a novel design integrating a GelSight tactile sensor, enhancing sensing capabilities and enabling finer control during specific manipulation tasks. To evaluate the gripper's performance, we conduct experiments involving two challenging tasks: 1) retrieving, singularizing, and classification of various objects embedded in granular media, and 2) executing scooping manipulations of credit cards in confined environments to achieve precise insertion. Our results demonstrate the efficiency of the proposed approach, with a high success rate for singulation and classification tasks, particularly for spherical objects at high as 94.3%, and a 100% success rate for scooping and inserting credit cards.
Read more8/2/2024
🔄
0
Adaptive Motion Planning for Multi-fingered Functional Grasp via Force Feedback
Dongying Tian, Xiangbo Lin, Yi Sun
Enabling multi-fingered robots to grasp and manipulate objects with human-like dexterity is especially challenging during the dynamic, continuous hand-object interactions. Closed-loop feedback control is essential for dexterous hands to dynamically finetune hand poses when performing precise functional grasps. This work proposes an adaptive motion planning method based on deep reinforcement learning to adjust grasping poses according to real-time feedback from joint torques from pre-grasp to goal grasp. We find the multi-joint torques of the dexterous hand can sense object positions through contacts and collisions, enabling real-time adjustment of grasps to generate varying grasping trajectories for objects in different positions. In our experiments, the performance gap with and without force feedback reveals the important role of force feedback in adaptive manipulation. Our approach utilizing force feedback preliminarily exhibits human-like flexibility, adaptability, and precision.
Read more9/25/2024