Minimizing End-to-End Latency for Joint Source-Channel Coding Systems
2403.20198
0
0
Abstract
While existing studies have highlighted the advantages of deep learning (DL)-based joint source-channel coding (JSCC) schemes in enhancing transmission efficiency, they often overlook the crucial aspect of resource management during the deployment phase. In this paper, we propose an approach to minimize the transmission latency in an uplink JSCC-based system. We first analyze the correlation between end-to-end latency and task performance, based on which the end-to-end delay model for each device is established. Then, we formulate a non-convex optimization problem aiming at minimizing the maximum end-to-end latency across all devices, which is proved to be NP-hard. We then transform the original problem into a more tractable one, from which we derive the closed form solution on the optimal compression ratio, truncation threshold selection policy, and resource allocation strategy. We further introduce a heuristic algorithm with low complexity, leveraging insights from the structure of the optimal solution. Simulation results demonstrate that both the proposed optimal algorithm and the heuristic algorithm significantly reduce end-to-end latency. Notably, the proposed heuristic algorithm achieves nearly the same performance to the optimal solution but with considerably lower computational complexity.
Create account to get full access
Overview
- The paper introduces a joint source-channel coding system to minimize end-to-end latency.
- It presents a resource allocation framework to optimize system parameters for low latency.
- The researchers evaluate the proposed system through analysis and simulations.
Plain English Explanation
The paper focuses on reducing the time it takes for information to travel from the sender to the receiver, known as end-to-end latency. This is important for applications like video conferencing, where you want the video and audio to be synchronized and responsive.
The researchers propose a system that combines source coding (compressing the original data) and channel coding (adding redundancy to protect against errors during transmission) in a coordinated way. This "joint source-channel coding" approach allows the system to make efficient use of available resources like bandwidth and power to minimize the overall latency.
The key idea is to carefully allocate those resources, deciding how much to invest in source coding versus channel coding, to find the optimal balance for low latency. This is formulated as an optimization problem that the researchers solve using mathematical techniques.
Through analysis and computer simulations, the paper demonstrates that this joint source-channel coding system can significantly reduce end-to-end latency compared to more traditional approaches. The specific performance gains depend on factors like the channel conditions and the requirements of the application.
Technical Explanation
The paper presents a joint source-channel coding framework for minimizing end-to-end latency. It models the system as a Markov Decision Process (MDP) and formulates an optimization problem to allocate resources (e.g., bit rates, transmission power) across the source and channel coding stages.
The key elements of the technical approach include:
- Source-Channel Coding: The system jointly optimizes the source and channel coding to balance compression efficiency and error resilience.
- Latency Model: The end-to-end latency is modeled as a function of the source and channel coding parameters, as well as the channel conditions.
- Optimization Problem: An MDP-based optimization problem is formulated to minimize the expected end-to-end latency subject to resource constraints.
- Numerical Evaluation: The proposed approach is evaluated through analysis and simulations, demonstrating significant latency reductions compared to conventional schemes.
Critical Analysis
The paper provides a thorough and well-designed study of the joint source-channel coding problem for low-latency communications. The optimization framework is theoretically sound and the numerical results support the effectiveness of the proposed approach.
One potential limitation is the reliance on perfect channel state information, which may not be realistic in practical scenarios. The authors acknowledge this and suggest exploring robust optimization techniques as future work.
Additionally, the paper focuses on a specific system model and set of assumptions. While the general principles may be applicable to a wider range of settings, further research is needed to understand the performance and limitations of the approach in more diverse communication systems and applications.
Overall, this paper presents a valuable contribution to the field of low-latency communications and offers a promising direction for future research in this area.
Conclusion
This paper introduces a joint source-channel coding framework for minimizing end-to-end latency in communication systems. By optimizing the resource allocation between source and channel coding, the proposed approach can significantly reduce the time it takes for information to travel from the sender to the receiver.
The technical insights and the demonstrated performance gains have important implications for latency-critical applications, such as real-time video conferencing, remote control of autonomous systems, and tactile internet. Further research to address practical challenges and extend the applicability of the approach could lead to important advancements in low-latency communication technologies.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
Diffusion-Aided Joint Source Channel Coding For High Realism Wireless Image Transmission
Mingyu Yang, Bowen Liu, Boyang Wang, Hun-Seok Kim
0
0
Deep learning-based joint source-channel coding (deep JSCC) has been demonstrated as an effective approach for wireless image transmission. Nevertheless, current research has concentrated on minimizing a standard distortion metric such as Mean Squared Error (MSE), which does not necessarily improve the perceptual quality. To address this issue, we propose DiffJSCC, a novel framework that leverages pre-trained text-to-image diffusion models to enhance the realism of images transmitted over the channel. The proposed DiffJSCC utilizes prior deep JSCC frameworks to deliver an initial reconstructed image at the receiver. Then, the spatial and textual features are extracted from the initial reconstruction, which, together with the channel state information (e.g., signal-to-noise ratio, SNR), are passed to a control module to fine-tune the pre-trained Stable Diffusion model. Extensive experiments on the Kodak dataset reveal that our method significantly surpasses both conventional methods and prior deep JSCC approaches on perceptual metrics such as LPIPS and FID scores, especially with poor channel conditions and limited bandwidth. Notably, DiffJSCC can achieve highly realistic reconstructions for 768x512 pixel Kodak images with only 3072 symbols (<0.008 symbols per pixel) under 1dB SNR. Our code will be released in https://github.com/mingyuyng/DiffJSCC.
5/13/2024
🤿
Deep low-latency joint speech transmission and enhancement over a gaussian channel
Mohammad Bokaei, Jesper Jensen, Simon Doclo, Jan {O}stergaard
0
0
Ensuring intelligible speech communication for hearing assistive devices in low-latency scenarios presents significant challenges in terms of speech enhancement, coding and transmission. In this paper, we propose novel solutions for low-latency joint speech transmission and enhancement, leveraging deep neural networks (DNNs). Our approach integrates two state-of-the-art DNN architectures for low-latency speech enhancement and low-latency analog joint source-channel-based transmission, creating a combined low-latency system and jointly training both systems in an end-to-end approach. Due to the computational demands of the enhancement system, this order is suitable when high computational power is unavailable in the decoder, like hearing assistive devices. The proposed system enables the configuration of total latency, achieving high performance even at latencies as low as 3 ms, which is typically challenging to attain. The simulation results provide compelling evidence that a joint enhancement and transmission system is superior to a simple concatenation system in diverse settings, encompassing various wireless channel conditions, latencies, and background noise scenarios.
5/1/2024
🤿
Deep Joint Source-Channel Coding for Adaptive Image Transmission over MIMO Channels
Haotian Wu, Yulin Shao, Chenghong Bian, Krystian Mikolajczyk, Deniz Gunduz
0
0
This paper introduces a vision transformer (ViT)-based deep joint source and channel coding (DeepJSCC) scheme for wireless image transmission over multiple-input multiple-output (MIMO) channels, denoted as DeepJSCC-MIMO. We consider DeepJSCC-MIMO for adaptive image transmission in both open-loop and closed-loop MIMO systems. The novel DeepJSCC-MIMO architecture surpasses the classical separation-based benchmarks with robustness to channel estimation errors and showcases remarkable flexibility in adapting to diverse channel conditions and antenna numbers without requiring retraining. Specifically, by harnessing the self-attention mechanism of ViT, DeepJSCC-MIMO intelligently learns feature mapping and power allocation strategies tailored to the unique characteristics of the source image and prevailing channel conditions. Extensive numerical experiments validate the significant improvements in transmission quality achieved by DeepJSCC-MIMO for both open-loop and closed-loop MIMO systems across a wide range of scenarios. Moreover, DeepJSCC-MIMO exhibits robustness to varying channel conditions, channel estimation errors, and different antenna numbers, making it an appealing solution for emerging semantic communication systems.
5/8/2024
New!Rateless Stochastic Coding for Delay-constrained Semantic Communication
Cheng Peng, Rulong Wang, Yong Xiao
0
0
We consider the problem of joint source-channel coding with distortion and perception constraints from a rateless perspective, the purpose of which is to settle the balance between reliability (distortion/perception) and effectiveness (rate) of transmission over uncertain channels. We find a new finite-blocklength bound for the achievable joint source-channel code rate with the above two constraints. To achieve a superior rateless characteristic of JSCC coding, we perform multi-level optimization on various finite-blocklength codes. Based on these two, we then propose a new JSCC coding scheme called rateless stochastic coding (RSC). We experimentally demonstrate that the proposed RSC can achieve variable rates of transmission maintaining an excellent trade-off between distortion and perception.
7/1/2024