Multi-scale Topology Optimization using Neural Networks
2404.08708
0
0
🛠️
Abstract
A long-standing challenge is designing multi-scale structures with good connectivity between cells while optimizing each cell to reach close to the theoretical performance limit. We propose a new method for direct multi-scale topology optimization using neural networks. Our approach focuses on inverse homogenization that seamlessly maintains compatibility across neighboring microstructure cells. Our approach consists of a topology neural network that optimizes the microstructure shape and distribution across the design domain as a continuous field. Each microstructure cell is optimized based on a specified elasticity tensor that also accommodates in-plane rotations. The neural network takes as input the local coordinates within a cell to represent the density distribution within a cell, as well as the global coordinates of each cell to design spatially varying microstructure cells. As such, our approach models an n-dimensional multi-scale optimization problem as a 2n-dimensional inverse homogenization problem using neural networks. During the inverse homogenization of each unit cell, we extend the boundary of each cell by scaling the input coordinates such that the boundaries of neighboring cells are combined. Inverse homogenization on the combined cell improves connectivity. We demonstrate our method through the design and optimization of graded multi-scale structures.
Create account to get full access
Overview
- Proposes a new method for direct multi-scale topology optimization using neural networks
- Focuses on inverse homogenization to maintain compatibility across neighboring microstructure cells
- Optimizes the microstructure shape and distribution across the design domain as a continuous field
- Extends the boundary of each cell to improve connectivity between neighboring cells
Plain English Explanation
The paper presents a novel approach for designing multi-scale structures with strong connections between individual cells while optimizing each cell to reach near-optimal performance. The key idea is to use a neural network to model the topology optimization problem, which allows for a seamless representation of the microstructure across the entire design domain.
The neural network takes as input the local coordinates within a cell to represent the density distribution, as well as the global coordinates of each cell to design spatially varying microstructures. This effectively transforms the n-dimensional multi-scale optimization problem into a 2n-dimensional inverse homogenization problem.
To improve the connectivity between neighboring cells, the researchers extend the boundary of each cell by scaling the input coordinates. This allows the inverse homogenization process to optimize the combined cell, leading to better integration between the microstructures.
The authors demonstrate their method by designing and optimizing graded multi-scale structures, showcasing the potential of this approach to create complex, high-performing materials and structures.
Technical Explanation
The paper presents a new method for direct multi-scale topology optimization using neural networks. The core idea is to leverage inverse homogenization to seamlessly maintain compatibility across neighboring microstructure cells.
The approach uses a topology neural network to optimize the microstructure shape and distribution across the design domain as a continuous field. The network takes as input the local coordinates within a cell to represent the density distribution, as well as the global coordinates of each cell to design spatially varying microstructures.
To improve the connectivity between neighboring cells, the researchers extend the boundary of each cell by scaling the input coordinates. This allows the inverse homogenization process to optimize the combined cell, leading to better integration between the microstructures.
The authors demonstrate their method through the design and optimization of graded multi-scale structures, showcasing the potential of this approach to create complex, high-performing materials and structures.
Critical Analysis
The paper presents a compelling approach to multi-scale topology optimization, leveraging neural networks and inverse homogenization to tackle the challenge of designing structures with strong connectivity between cells while optimizing each cell's performance.
One potential limitation is the computational complexity of the 2n-dimensional inverse homogenization problem, which may make the approach challenging to apply to large-scale, high-dimensional design problems. The authors do not provide a detailed analysis of the scalability and computational efficiency of their method.
Additionally, the paper does not explore the sensitivity of the optimized designs to manufacturing uncertainties or defects. In practical applications, the ability to create robust designs that can withstand real-world variability and imperfections would be an important consideration.
Nonetheless, the core ideas presented in the paper, such as the use of neural networks for multi-scale representation and the innovative approach to improving cell connectivity, are valuable contributions to the field of topology optimization and multiscale design. Further research and development in this direction could lead to significant advances in the design of high-performance materials and structures.
Conclusion
The paper presents a novel method for direct multi-scale topology optimization using neural networks, focusing on inverse homogenization to maintain compatibility across neighboring microstructure cells. The approach models the multi-scale optimization problem as a higher-dimensional inverse homogenization problem, allowing for the design of spatially varying microstructures with improved connectivity.
The authors demonstrate the potential of their method through the optimization of graded multi-scale structures, showcasing the ability to create complex, high-performing designs. While the computational complexity and robustness of the approach warrant further investigation, the core ideas presented in the paper represent valuable contributions to the field of multiscale design and topology optimization. This research could have significant implications for the development of advanced materials and structures with tailored properties.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
🧠
A Neural Network Transformer Model for Composite Microstructure Homogenization
Emil Pitz, Kishore Pochiraju
0
0
Heterogeneity and uncertainty in a composite microstructure lead to either computational bottlenecks if modeled rigorously or to solution inaccuracies in the stress field and failure predictions if approximated. Although methods suitable for analyzing arbitrary and non-linear microstructures exist, their computational cost makes them impractical to use in large-scale structural analysis. Surrogate models or Reduced Order Models (ROMs) commonly enhance efficiencies but are typically calibrated with a single microstructure. Homogenization methods, such as the Mori-Tanaka method, offer rapid homogenization for a wide range of constituent properties. However, simplifying assumptions, like stress and strain averaging in phases, render the consideration of both deterministic and stochastic variations in microstructure infeasible. This paper illustrates a transformer neural network architecture that captures the knowledge of various microstructures and constituents, enabling it to function as a computationally efficient homogenization surrogate model. Given an image or an abstraction of an arbitrary composite microstructure of linearly elastic fibers in an elastoplastic matrix, the transformer network predicts the history-dependent, non-linear, and homogenized stress-strain response. Two methods for encoding microstructure features were tested: calculating two-point statistics using Principal Component Analysis (PCA) for dimensionality reduction and employing an autoencoder with a Convolutional Neural Network (CNN). Both methods accurately predict the homogenized material response. The developed transformer neural network offers an efficient means for microstructure-to-property translation, generalizable and extendable to a variety of microstructures. The paper describes the network architecture, training and testing data generation, and performance under cycling and random loadings.
5/30/2024
Equivariant graph convolutional neural networks for the representation of homogenized anisotropic microstructural mechanical response
Ravi Patel, Cosmin Safta, Reese E. Jones
0
0
Composite materials with different microstructural material symmetries are common in engineering applications where grain structure, alloying and particle/fiber packing are optimized via controlled manufacturing. In fact these microstructural tunings can be done throughout a part to achieve functional gradation and optimization at a structural level. To predict the performance of particular microstructural configuration and thereby overall performance, constitutive models of materials with microstructure are needed. In this work we provide neural network architectures that provide effective homogenization models of materials with anisotropic components. These models satisfy equivariance and material symmetry principles inherently through a combination of equivariant and tensor basis operations. We demonstrate them on datasets of stochastic volume elements with different textures and phases where the material undergoes elastic and plastic deformation, and show that the these network architectures provide significant performance improvements.
4/30/2024
🤿
Enhancing Multiscale Simulations with Constitutive Relations-Aware Deep Operator Networks
Hamidreza Eivazi, Mahyar Alikhani, Jendrik-Alexander Troger, Stefan Wittek, Stefan Hartmann, Andreas Rausch
0
0
Multiscale problems are widely observed across diverse domains in physics and engineering. Translating these problems into numerical simulations and solving them using numerical schemes, e.g. the finite element method, is costly due to the demand of solving initial boundary-value problems at multiple scales. On the other hand, multiscale finite element computations are commended for their ability to integrate micro-structural properties into macroscopic computational analyses using homogenization techniques. Recently, neural operator-based surrogate models have shown trustworthy performance for solving a wide range of partial differential equations. In this work, we propose a hybrid method in which we utilize deep operator networks for surrogate modeling of the microscale physics. This allows us to embed the constitutive relations of the microscale into the model architecture and to predict microscale strains and stresses based on the prescribed macroscale strain inputs. Furthermore, numerical homogenization is carried out to obtain the macroscale quantities of interest. We apply the proposed approach to quasi-static problems of solid mechanics. The results demonstrate that our constitutive relations-aware DeepONet can yield accurate solutions even when being confronted with a restricted dataset during model development.
5/24/2024
Transfer learning-assisted inverse modeling in nanophotonics based on mixture density networks
Liang Cheng, Prashant Singh, Francesco Ferranti
0
0
The simulation of nanophotonic structures relies on electromagnetic solvers, which play a crucial role in understanding their behavior. However, these solvers often come with a significant computational cost, making their application in design tasks, such as optimization, impractical. To address this challenge, machine learning techniques have been explored for accurate and efficient modeling and design of photonic devices. Deep neural networks, in particular, have gained considerable attention in this field. They can be used to create both forward and inverse models. An inverse modeling approach avoids the need for coupling a forward model with an optimizer and directly performs the prediction of the optimal design parameters values. In this paper, we propose an inverse modeling method for nanophotonic structures, based on a mixture density network model enhanced by transfer learning. Mixture density networks can predict multiple possible solutions at a time including their respective importance as Gaussian distributions. However, multiple challenges exist for mixture density network models. An important challenge is that an upper bound on the number of possible simultaneous solutions needs to be specified in advance. Also, another challenge is that the model parameters must be jointly optimized, which can result computationally expensive. Moreover, optimizing all parameters simultaneously can be numerically unstable and can lead to degenerate predictions. The proposed approach allows overcoming these limitations using transfer learning-based techniques, while preserving a high accuracy in the prediction capability of the design solutions given an optical response as an input. A dimensionality reduction step is also explored. Numerical results validate the proposed method.
5/22/2024