A Neural Network Transformer Model for Composite Microstructure Homogenization
2304.07877
0
0
🧠
Abstract
Heterogeneity and uncertainty in a composite microstructure lead to either computational bottlenecks if modeled rigorously or to solution inaccuracies in the stress field and failure predictions if approximated. Although methods suitable for analyzing arbitrary and non-linear microstructures exist, their computational cost makes them impractical to use in large-scale structural analysis. Surrogate models or Reduced Order Models (ROMs) commonly enhance efficiencies but are typically calibrated with a single microstructure. Homogenization methods, such as the Mori-Tanaka method, offer rapid homogenization for a wide range of constituent properties. However, simplifying assumptions, like stress and strain averaging in phases, render the consideration of both deterministic and stochastic variations in microstructure infeasible. This paper illustrates a transformer neural network architecture that captures the knowledge of various microstructures and constituents, enabling it to function as a computationally efficient homogenization surrogate model. Given an image or an abstraction of an arbitrary composite microstructure of linearly elastic fibers in an elastoplastic matrix, the transformer network predicts the history-dependent, non-linear, and homogenized stress-strain response. Two methods for encoding microstructure features were tested: calculating two-point statistics using Principal Component Analysis (PCA) for dimensionality reduction and employing an autoencoder with a Convolutional Neural Network (CNN). Both methods accurately predict the homogenized material response. The developed transformer neural network offers an efficient means for microstructure-to-property translation, generalizable and extendable to a variety of microstructures. The paper describes the network architecture, training and testing data generation, and performance under cycling and random loadings.
Create account to get full access
Overview
- Composite materials with heterogeneous microstructures pose challenges for modeling and analysis
- Existing methods either have high computational costs or make simplifying assumptions that reduce accuracy
- This paper presents a transformer neural network architecture that can efficiently homogenize and predict the stress-strain response of arbitrary composite microstructures
Plain English Explanation
Composite materials, like those used in aerospace and other industries, are made up of different materials arranged in a complex, microscopic pattern called a "microstructure." This heterogeneity and uncertainty in the microstructure can lead to difficulties when trying to model and analyze the material's behavior.
Existing methods that can handle arbitrary and non-linear microstructures are often too computationally expensive to be practical for large-scale structural analysis. On the other hand, simpler homogenization methods like the Mori-Tanaka method can quickly provide an average or "homogenized" behavior, but they make simplifying assumptions that can reduce the accuracy of the stress and failure predictions.
The researchers in this paper have developed a transformer neural network architecture that can capture the knowledge of various microstructures and their components. This allows the network to function as a computationally efficient homogenization model, predicting the history-dependent, non-linear, and homogenized stress-strain response of an arbitrary composite microstructure. The network can take in an image or abstraction of the microstructure and use that to forecast the material's overall behavior, without the need for expensive, detailed simulations.
Technical Explanation
The key innovation in this paper is the use of a transformer neural network architecture to serve as a surrogate or "reduced order" model for homogenizing the behavior of composite materials with complex microstructures. Transformer networks are a type of deep learning model that has shown success in various tasks, including translation between languages and generating coherent text.
The researchers tested two different methods for encoding the microstructure features as inputs to the transformer network:
- Principal Component Analysis (PCA): Calculating two-point statistics of the microstructure and using PCA for dimensionality reduction.
- Autoencoder with Convolutional Neural Network (CNN): Using a CNN-based autoencoder to learn a compact representation of the microstructure.
Both of these encoding methods were able to accurately predict the homogenized, non-linear stress-strain response of the composite material, even under cycling and random loadings. This demonstrates the transformer network's ability to capture the complex relationships between the microstructure and the overall material behavior.
Critical Analysis
The paper provides a compelling solution to the challenge of efficiently modeling the behavior of composite materials with heterogeneous microstructures. The use of a transformer network as a surrogate model is a novel and potentially powerful approach, as it can learn to generalize across a wide range of microstructures without the need for computationally expensive simulations.
However, the paper does not address the potential limitations of this approach. For example, the transformer network is trained on a finite set of microstructures, so its ability to accurately predict the behavior of completely novel microstructures is not fully explored. Additionally, the paper does not discuss the sensitivity of the model to the quality and representativeness of the training data, which could be an important factor in real-world applications.
Furthermore, while the paper demonstrates the model's accuracy under cycling and random loadings, it does not investigate the model's performance under more extreme or complex loading conditions that may be encountered in practice. Assessing the model's robustness and reliability in these scenarios would be an important next step.
Conclusion
This paper presents a novel transformer neural network architecture that can efficiently homogenize and predict the stress-strain response of composite materials with arbitrary microstructures. By capturing the knowledge of various microstructures and their constituents, the transformer network can function as a computationally efficient surrogate model, which is a significant advance over existing methods that either have high computational costs or make simplifying assumptions.
The ability to accurately forecast the behavior of complex composite materials without the need for expensive simulations has the potential to greatly impact the design and optimization of a wide range of engineering applications, from aerospace structures to advanced materials for renewable energy technologies. As the research in this area continues to evolve, the transformer network approach may become an increasingly valuable tool in the arsenal of computational materials science.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
Equivariant graph convolutional neural networks for the representation of homogenized anisotropic microstructural mechanical response
Ravi Patel, Cosmin Safta, Reese E. Jones
0
0
Composite materials with different microstructural material symmetries are common in engineering applications where grain structure, alloying and particle/fiber packing are optimized via controlled manufacturing. In fact these microstructural tunings can be done throughout a part to achieve functional gradation and optimization at a structural level. To predict the performance of particular microstructural configuration and thereby overall performance, constitutive models of materials with microstructure are needed. In this work we provide neural network architectures that provide effective homogenization models of materials with anisotropic components. These models satisfy equivariance and material symmetry principles inherently through a combination of equivariant and tensor basis operations. We demonstrate them on datasets of stochastic volume elements with different textures and phases where the material undergoes elastic and plastic deformation, and show that the these network architectures provide significant performance improvements.
4/30/2024
🧠
Physically recurrent neural network for rate and path-dependent heterogeneous materials in a finite strain framework
M. A. Maia, I. B. C. M. Rocha, D. Kovav{c}evi'c, F. P. van der Meer
0
0
In this work, a hybrid physics-based data-driven surrogate model for the microscale analysis of heterogeneous material is investigated. The proposed model benefits from the physics-based knowledge contained in the constitutive models used in the full-order micromodel by embedding them in a neural network. Following previous developments, this paper extends the applicability of the physically recurrent neural network (PRNN) by introducing an architecture suitable for rate-dependent materials in a finite strain framework. In this model, the homogenized deformation gradient of the micromodel is encoded into a set of deformation gradients serving as input to the embedded constitutive models. These constitutive models compute stresses, which are combined in a decoder to predict the homogenized stress, such that the internal variables of the history-dependent constitutive models naturally provide physics-based memory for the network. To demonstrate the capabilities of the surrogate model, we consider a unidirectional composite micromodel with transversely isotropic elastic fibers and elasto-viscoplastic matrix material. The extrapolation properties of the surrogate model trained to replace such micromodel are tested on loading scenarios unseen during training, ranging from different strain-rates to cyclic loading and relaxation. Speed-ups of three orders of magnitude with respect to the runtime of the original micromodel are obtained.
4/30/2024
🛠️
Multi-scale Topology Optimization using Neural Networks
Hongrui Chen, Xingchen Liu, Levent Burak Kara
0
0
A long-standing challenge is designing multi-scale structures with good connectivity between cells while optimizing each cell to reach close to the theoretical performance limit. We propose a new method for direct multi-scale topology optimization using neural networks. Our approach focuses on inverse homogenization that seamlessly maintains compatibility across neighboring microstructure cells. Our approach consists of a topology neural network that optimizes the microstructure shape and distribution across the design domain as a continuous field. Each microstructure cell is optimized based on a specified elasticity tensor that also accommodates in-plane rotations. The neural network takes as input the local coordinates within a cell to represent the density distribution within a cell, as well as the global coordinates of each cell to design spatially varying microstructure cells. As such, our approach models an n-dimensional multi-scale optimization problem as a 2n-dimensional inverse homogenization problem using neural networks. During the inverse homogenization of each unit cell, we extend the boundary of each cell by scaling the input coordinates such that the boundaries of neighboring cells are combined. Inverse homogenization on the combined cell improves connectivity. We demonstrate our method through the design and optimization of graded multi-scale structures.
4/16/2024
HomoGenius: a Foundation Model of Homogenization for Rapid Prediction of Effective Mechanical Properties using Neural Operators
Yizheng Wang, Xiang Li, Ziming Yan, Yuqing Du, Jinshuai Bai, Bokai Liu, Timon Rabczuk, Yinghua Liu
0
0
Homogenization is an essential tool for studying multiscale physical phenomena. However, traditional numerical homogenization, heavily reliant on finite element analysis, requires extensive computation costs, particularly in handling complex geometries, materials, and high-resolution problems. To address these limitations, we propose a numerical homogenization model based on operator learning: HomoGenius. The proposed model can quickly provide homogenization results for arbitrary geometries, materials, and resolutions, increasing the efficiency by a factor of 80 compared to traditional numerical homogenization methods. We validate effectiveness of our model in predicting the effective elastic modulus on periodic materials (TPMS: Triply Periodic Minimal Surface), including complex geometries, various Poisson's ratios and elastic modulus, and different resolutions for training and testing. The results show that our model possesses high precision, super efficiency, and learning capability.
4/12/2024