Neural Network-based Two-Dimensional Filtering for OTFS Symbol Detection

Read original: arXiv:2406.16868 - Published 6/26/2024 by Jiarui Xu, Karim Said, Lizhong Zheng, Lingjia Liu
Total Score

0

🧠

Sign in to get full access

or

If you already have an account, we'll log you in

Overview

  • OTFS is a promising wireless communication modulation scheme for high-mobility scenarios
  • Previous research introduced a reservoir computing (RC) based approach for online symbol detection in OTFS systems
  • However, this approach did not fully leverage the properties of the OTFS system to unlock RC's potential
  • This paper introduces a novel 2D-RC approach designed specifically for OTFS systems

Plain English Explanation

OTFS is a way of encoding information for wireless communication that works well when devices are moving quickly, like in a car or train. A previous study looked at using a type of artificial intelligence called reservoir computing to detect the symbols in the OTFS signal as it's being received. However, that earlier approach didn't take full advantage of the special features of the OTFS system.

This new paper introduces a different kind of reservoir computing system that's designed specifically for OTFS. It has a two-dimensional (2D) structure that can better handle the circular effects in the OTFS signal caused by the movement of the devices. Unlike the previous work, this 2D reservoir computing system can operate using just a single neural network, making it more efficient.

The researchers tested this new 2D reservoir computing approach and found that it outperformed both the earlier reservoir computing method and some other model-based detection techniques, especially for signals with higher modulation orders.

Technical Explanation

This paper presents a novel two-dimensional reservoir computing (2D-RC) approach for online symbol detection in orthogonal time frequency space (OTFS) systems. OTFS is a promising modulation scheme for wireless communication in high-mobility scenarios, but previous RC-based approaches did not fully leverage the properties of the OTFS system.

The proposed 2D-RC architecture is designed with a two-dimensional filtering structure to better equalize the circular channel effects in the delay-Doppler (DD) domain of the OTFS system. This allows the 2D-RC to operate in the DD domain using a single neural network, unlike previous work which required multiple RCs to track time-domain channel variations.

Experimental results demonstrate that the 2D-RC approach outperforms the previous RC-based method as well as model-based detection techniques across different modulation orders. This suggests the 2D-RC can more effectively unlock the potential of reservoir computing for online symbol detection in OTFS systems.

Critical Analysis

The paper presents a well-designed 2D-RC architecture that is tailored to the OTFS system, which is a key strength. However, the authors acknowledge that the computational complexity of the 2D-RC may be higher than some model-based methods, which could be a limitation for real-world deployment.

Additionally, the paper focuses on offline training and online inference, but does not explore the potential for online or adaptive training of the 2D-RC to further improve performance in dynamic channel conditions. Investigating this area could be an interesting direction for future research.

Overall, the 2D-RC approach represents a promising advance in leveraging reservoir computing for symbol detection in OTFS systems, but there are still opportunities to refine the technique and explore its practical implementation.

Conclusion

This paper introduces a novel two-dimensional reservoir computing (2D-RC) approach designed specifically for online symbol detection in orthogonal time frequency space (OTFS) wireless communication systems. The 2D-RC architecture leverages the unique properties of the OTFS system to more effectively equalize the circular channel effects, enabling it to outperform previous reservoir computing and model-based detection methods.

While the 2D-RC approach shows promise, there are still some potential limitations around computational complexity that warrant further investigation. Exploring online or adaptive training of the 2D-RC could also be an interesting direction for future research to enhance its performance in dynamic channel conditions.

Overall, this work represents an important step forward in applying reservoir computing techniques to the challenge of symbol detection in high-mobility OTFS systems, highlighting the value of tailoring AI architectures to the specific properties of the underlying problem.



This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!

Follow @aimodelsfyi on 𝕏 →

Related Papers

🧠

Total Score

0

Neural Network-based Two-Dimensional Filtering for OTFS Symbol Detection

Jiarui Xu, Karim Said, Lizhong Zheng, Lingjia Liu

Orthogonal time frequency space (OTFS) is a promising modulation scheme for wireless communication in high-mobility scenarios. Recently, a reservoir computing (RC) based approach has been introduced for online subframe-based symbol detection in the OTFS system, where only the limited over-the-air (OTA) pilot symbols are utilized for training. However, the previous RC-based approach does not design the RC architecture based on the properties of the OTFS system to fully unlock the potential of RC. This paper introduces a novel two-dimensional RC (2D-RC) approach for online symbol detection on a subframe basis in the OTFS system. The 2D-RC is designed to have a two-dimensional (2D) filtering structure to equalize the 2D circular channel effect in the delay-Doppler (DD) domain of the OTFS system. With the introduced architecture, the 2D-RC can operate in the DD domain with only a single neural network, unlike our previous work which requires multiple RCs to track channel variations in the time domain. Experimental results demonstrate the advantages of the 2D-RC approach over the previous RC-based approach and the compared model-based methods across different modulation orders.

Read more

6/26/2024

🤿

Total Score

0

Real time parameter estimation for adaptive OFDM/OTFS selection

Amina Darghouthi, Abdelhakim Khlifi, Belgacem Chibani

Future wireless communication systems must simultaneously address multiple challenges to ensure accurate data detection, deliver high Quality of Service (QoS), adding enable a high data transmission with low system design. Additionally, they need to reduce energy consumption and latency without increasing system complexity. Orthogonal Frequency Division Multiplexing (OFDM) is a commonly used waveform in 4G and 5G systems, it has limitations in handling significant delay and Doppler spread in high mobility scenarios. To overcome these weaknesses, a novel waveform named Orthogonal Time Frequency Space (OTFS) has been proposed, which aims to improve upon OFDM by closely matching signals to channel behavior. In this study, we propose a novel strategy that enables operators to dynamically select the best waveform based on estimated mobile user parameters. We use an Integrated Radar Sensing and Communication System (ISAC) to estimate delay and Doppler, as well as speed and range. This approach allows the base station to adapt to the mobile target, thereby enhancing the performance of wireless communication systems in high mobility and low complexity scenarios. Simulation results demonstrate the effectiveness of our proposed approach and show that it outperforms existing methods.

Read more

8/9/2024

🤯

Total Score

0

An hybrid framework OTFS OFDM based on mobile speed estimation

Amina Darghouthi, Abdelhakim Khlifi, Hmaied Shaiek, Fatma Ben Salah, Belgacem Chibani

The Future wireless communication systems face the challenging task of simultaneously providing high quality of service (QoS) and broadband data transmission, while also minimizing power consumption, latency, and system complexity. Although Orthogonal Frequency Division Multiplexing OFDM has been widely adopted in 4G and 5G systems, it struggles to cope with the significant delay and Doppler spread in high mobility scenarios. To address these challenges, a novel waveform called Orthogonal Time Frequency Space OTFS has emerged, aiming to outperform OFDM by closely aligning signals with the channel behaviour. In this paper, we propose a switching strategy that empowers operators to select the most appropriate waveform based on the estimated speed of the mobile user. This strategy enables the base station to dynamically choose the waveform that best suits the mobile users speed. Additionally, we suggest integrating an Integrated Sensing and Communication radar for accurate Doppler estimation, providing precise information to aid in waveform selection. By leveraging the switching strategy and harnessing the Doppler estimation capabilities of an ISAC radar, our proposed approach aims to enhance the performance of wireless communication systems in scenarios of high mobility. Considering the complexity of waveform processing, we introduce an optimized hybrid system that combines OTFS and OFDM, resulting in reduced complexity while still retaining performance benefits. This hybrid system presents a promising solution for improving the performance of wireless communication systems in scenarios with a high mobility. The simulation results validate the effectiveness of our approach, demonstrating its potential advantages for future wireless communication systems. The effectiveness of the proposed approach is validated by simulation results as it will be shown.

Read more

7/11/2024

🤿

Total Score

0

Waveform Design for Over-the-Air Computing

Nikos G. Evgenidis, Nikos A. Mitsiou, Sotiris A. Tegos, Panagiotis D. Diamantoulakis, Panagiotis Sarigiannidis, Ioannis T. Rekanos, George K. Karagiannidis

In response to the increasing number of devices anticipated in next-generation networks, a shift toward over-the-air (OTA) computing has been proposed. Leveraging the superposition of multiple access channels, OTA computing enables efficient resource management by supporting simultaneous uncoded transmission in the time and the frequency domain. Thus, to advance the integration of OTA computing, our study presents a theoretical analysis addressing practical issues encountered in current digital communication transceivers, such as time sampling error and intersymbol interference (ISI). To this end, we examine the theoretical mean squared error (MSE) for OTA transmission under time sampling error and ISI, while also exploring methods for minimizing the MSE in the OTA transmission. Utilizing alternating optimization, we also derive optimal power policies for both the devices and the base station. Additionally, we propose a novel deep neural network (DNN)-based approach to design waveforms enhancing OTA transmission performance under time sampling error and ISI. To ensure fair comparison with existing waveforms like the raised cosine (RC) and the better-than-raised-cosine (BRTC), we incorporate a custom loss function integrating energy and bandwidth constraints, along with practical design considerations such as waveform symmetry. Simulation results validate our theoretical analysis and demonstrate performance gains of the designed pulse over RC and BTRC waveforms. To facilitate testing of our results without necessitating the DNN structure recreation, we provide curve fitting parameters for select DNN-based waveforms as well.

Read more

6/3/2024