Plug-In RIS: A Novel Approach to Fully Passive Reconfigurable Intelligent Surfaces
2311.09626
0
0
🌀
Abstract
This paper presents a promising design concept for reconfigurable intelligent surfaces (RISs), named plug-in RIS, wherein the RIS is plugged into an appropriate position in the environment, adjusted once according to the location of both base station and blocked region, and operates with fixed beams to enhance the system performance. The plug-in RIS is a novel system design, streamlining RIS-assisted millimeter-wave (mmWave) communication without requiring decoupling two parts of the end-to-end channel, traditional control signal transmission, and online RIS configuration. In plug-in RIS-aided transmission, the transmitter efficiently activates specific regions of the divided large RIS by employing hybrid beamforming techniques, each with predetermined phase adjustments tailored to reflect signals to desired user locations. This user-centric approach enhances connectivity and overall user experience by dynamically illuminating the targeted user based on location. By introducing plug-in RIS's theoretical framework, design principles, and performance evaluation, we demonstrate its potential to revolutionize mmWave communications for the limited channel state information (CSI) scenarios. Simulation results illustrate that plug-in RIS provides power/cost-efficient solutions to overcome blockage in the mmWave communication system and a striking convergence in average bit error rate and achievable rate performance with traditional full CSI-enabled RIS solutions.
Create account to get full access
Overview
- This paper presents a new design concept for reconfigurable intelligent surfaces (RISs), called "plug-in RIS"
- Plug-in RIS aims to simplify RIS-assisted millimeter-wave (mmWave) communication by eliminating the need for real-time RIS configuration and channel state information (CSI) acquisition
- The plug-in RIS is pre-configured and can be easily installed in the environment, enhancing connectivity and user experience by dynamically illuminating targeted users
Plain English Explanation
The paper introduces a new way to use reconfigurable intelligent surfaces (RISs) to improve mmWave wireless communication. RISs are special surfaces that can reflect and redirect wireless signals, helping to overcome obstacles and improve coverage.
Traditionally, RISs need to be carefully configured and controlled in real-time to work effectively. This requires complex coordination between the transmitter, receiver, and RIS. The plug-in RIS concept simplifies this process.
With a plug-in RIS, the surface is pre-configured with the optimal settings for the environment. It can then be easily installed in the appropriate location, like plugging in a device. The transmitter can then efficiently activate specific regions of the RIS using beamforming techniques to focus the signal on the targeted user, without needing detailed channel information or real-time RIS adjustments.
This user-centric approach enhances connectivity and the overall user experience, as the system can dynamically illuminate the targeted user based on their location. The plug-in RIS also provides a more power and cost-efficient solution compared to traditional RIS systems that require full CSI.
Technical Explanation
The key innovation of the plug-in RIS is that it is a pre-configured, self-contained RIS unit that can be easily installed in the environment. It doesn't require the complex control signaling and real-time optimization needed for traditional RIS systems.
The transmitter uses hybrid beamforming techniques to efficiently activate specific regions of the divided, large plug-in RIS. Each region has predetermined phase adjustments to reflect signals to the desired user locations. This user-centric approach enhances connectivity compared to a static RIS.
The paper provides the theoretical framework, design principles, and performance evaluation of the plug-in RIS concept. Simulations show it can overcome blockages in mmWave systems and achieve comparable performance to traditional RIS solutions that require full CSI, but with lower power and cost.
Critical Analysis
The paper provides a promising new direction for simplifying RIS-assisted mmWave communications. By pre-configuring the RIS and using a user-centric beamforming approach, it addresses key challenges around CSI acquisition and real-time RIS optimization.
However, the paper does not delve into practical limitations or implementation challenges. For example, the pre-configuration process and how it adapts to changing environments is not discussed in depth. The impact of imperfect beam targeting or RIS calibration errors is also not analyzed.
Additionally, the performance comparison is limited to average bit error rate and achievable rate. Other metrics like coverage, energy efficiency, and scalability to larger RIS deployments could provide further insight into the plug-in RIS's advantages and drawbacks.
Overall, the plug-in RIS concept is a creative step forward, but more research is needed to fully understand its practical viability and performance trade-offs compared to alternative RIS architectures and beamforming techniques.
Conclusion
This paper presents a novel plug-in RIS design that simplifies the deployment and operation of RIS-assisted mmWave communication systems. By pre-configuring the RIS and using a user-centric beamforming approach, it addresses key challenges around CSI acquisition and real-time RIS optimization.
Simulations show the plug-in RIS can provide power and cost-efficient solutions to overcome blockages, with performance comparable to traditional RIS systems. This innovative concept has the potential to revolutionize mmWave communications, particularly in scenarios with limited CSI.
Further research is needed to understand the practical limitations and implementation challenges of the plug-in RIS approach. Exploring additional performance metrics and comparisons to other RIS architectures could also provide deeper insights. Nevertheless, this paper demonstrates an exciting new direction for enhancing wireless connectivity through reconfigurable intelligent surfaces.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
Sustainable Wireless Networks via Reconfigurable Intelligent Surfaces (RISs): Overview of the ETSI ISG RIS
Ruiqi Liu, Shuang Zheng, Qingqing Wu, Yifan Jiang, Nan Zhang, Yuanwei Liu, Marco Di Renzo, and George C. Alexandropoulos
0
0
Reconfigurable Intelligent Surfaces (RISs) are a novel form of ultra-low power devices that are capable to increase the communication data rates as well as the cell coverage in a cost- and energy-efficient way. This is attributed to their programmable operation that enables them to dynamically manipulate the wireless propagation environment, a feature that has lately inspired numerous research investigations and applications. To pave the way to the formal standardization of RISs, the European Telecommunications Standards Institute (ETSI) launched the Industry Specification Group (ISG) on the RIS technology in September 2021. This article provides a comprehensive overview of the status of the work conducted by the ETSI ISG RIS, covering typical deployment scenarios of reconfigurable metasurfaces, use cases and operating applications, requirements, emerging hardware architectures and operating modes, as well as the latest insights regarding future directions of RISs and the resulting smart wireless environments.
6/11/2024
🖼️
Nonlocal Reconfigurable Intelligent Surfaces for Wireless Communication: Modeling and Physical Layer Aspects
Amine Mezghani, Faouzi Bellili, Ekram Hossain
0
0
Conventional Reconfigurable intelligent surfaces (RIS) for wireless communications have a local position-dependent (phase-gradient) scattering response on the surface. We consider more general RIS structures, called nonlocal (or redirective) RIS, that are capable of selectively manipulate the impinging waves depending on the incident angle. Redirective RIS have nonlocal wavefront-selective scattering behavior and can be implemented using multilayer arrays such as metalenses. We demonstrate that this more sophisticated type of surfaces has several advantages such as: lower overhead through coodebook-based reconfigurability, decoupled wave manipulations, and higher efficiency in multiuser scenarios via multifunctional operation. Additionally, redirective RIS architectures greatly benefit form the directional nature of wave propagation at high frequencies and can support integrated fronthaul and access (IFA) networks most efficiently. We also discuss the scalability and compactness issues and propose efficient nonlocal RIS architectures such as fractionated lens-based RIS and mirror-backed phase-masks structures that do not require additional control complexity and overhead while still offering better performance than conventional local RIS.
4/4/2024
📶
RIS in Cellular Networks -- Challenges and Issues
Magnus {AA}strom, Philipp Gentner, Omer Haliloglu, Behrooz Makki, Ola Tageman
0
0
Reconfigurable intelligent surface (RIS) has been suggested to be a key 6G feature and was suggested to be considered as a study-item in both 3GPP Releases 18 and 19. However, in both releases, it has been decided not to continue with it as a study-item, and to leave it for possible future specification. In this paper, we present the rationale for such a decision. Particularly, we demonstrate the practical issues which may affect the feasibility or usefulness of RIS in cellular networks, and present open problems to be addressed before RIS can be used in practice. Moreover, we compare the performance of RIS with network-controlled repeater, the node with the most similar characteristics to RIS and which has been standardized in 3GPP Release 18. Finally, different simulations are presented to evaluate the performance of RIS-assisted networks.
4/9/2024
✅
Multi-hop Multi-RIS Wireless Communication Systems: Multi-reflection Path Scheduling and Beamforming
Xiaoyan Ma, Haixia Zhang, Xianhao Chen, Yuguang Fangmand Dongfeng Yuan
0
0
Reconfigurable intelligent surface (RIS) provides a promising way to proactively augment propagation environments for better transmission performance in wireless communications. Existing multi-RIS works mainly focus on link-level optimization with predetermined transmission paths, which cannot be directly extended to system-level management, since they neither consider the interference caused by undesired scattering of RISs, nor the performance balancing between different transmission paths. To address this, we study an innovative multi-hop multi-RIS communication system, where a base station (BS) transmits information to a set of distributed users over multi-RIS configuration space in a multi-hop manner. The signals for each user are subsequently reflected by the selected RISs via multi-reflection line-of-sight (LoS) links. To ensure that all users have fair access to the system to avoid excessive number of RISs serving one user, we aim to find the optimal beam reflecting path for each user, while judiciously determining the path scheduling strategies with the corresponding beamforming design to ensure the fairness. Due to the presence of interference caused by undesired scattering of RISs, it is highly challenging to solve the formulated multi-RIS multi-path beamforming optimization problem. To solve it, we first derive the optimal RISs' phase shifts and the corresponding reflecting path selection for each user based on its practical deployment location. With the optimized multi-reflection paths, we obtain a feasible user grouping pattern for effective interference mitigation by constructing the maximum independent sets (MISs). Finally, we propose a joint heuristic algorithm to iteratively update the beamforming vectors and the group scheduling policies to maximize the minimum equivalent data rate of all users.
5/22/2024