Multi-hop Multi-RIS Wireless Communication Systems: Multi-reflection Path Scheduling and Beamforming
2405.12530
0
0
✅
Abstract
Reconfigurable intelligent surface (RIS) provides a promising way to proactively augment propagation environments for better transmission performance in wireless communications. Existing multi-RIS works mainly focus on link-level optimization with predetermined transmission paths, which cannot be directly extended to system-level management, since they neither consider the interference caused by undesired scattering of RISs, nor the performance balancing between different transmission paths. To address this, we study an innovative multi-hop multi-RIS communication system, where a base station (BS) transmits information to a set of distributed users over multi-RIS configuration space in a multi-hop manner. The signals for each user are subsequently reflected by the selected RISs via multi-reflection line-of-sight (LoS) links. To ensure that all users have fair access to the system to avoid excessive number of RISs serving one user, we aim to find the optimal beam reflecting path for each user, while judiciously determining the path scheduling strategies with the corresponding beamforming design to ensure the fairness. Due to the presence of interference caused by undesired scattering of RISs, it is highly challenging to solve the formulated multi-RIS multi-path beamforming optimization problem. To solve it, we first derive the optimal RISs' phase shifts and the corresponding reflecting path selection for each user based on its practical deployment location. With the optimized multi-reflection paths, we obtain a feasible user grouping pattern for effective interference mitigation by constructing the maximum independent sets (MISs). Finally, we propose a joint heuristic algorithm to iteratively update the beamforming vectors and the group scheduling policies to maximize the minimum equivalent data rate of all users.
Create account to get full access
Overview
- This paper proposes an innovative multi-hop multi-reconfigurable intelligent surface (RIS) communication system to improve transmission performance in wireless networks.
- Existing approaches focus on link-level optimization with predetermined paths, but don't consider interference from undesired RIS scattering or performance balancing between paths.
- The proposed system aims to find optimal beam reflecting paths for each user while ensuring fairness in RIS usage.
- Solving this multi-RIS, multi-path beamforming optimization problem is highly challenging due to RIS interference.
Plain English Explanation
Wireless communication systems often face challenges in their physical environments, such as obstructions or interference that can degrade signal quality. Reconfigurable intelligent surfaces (RISs) are a promising technology that can help improve signal propagation by actively shaping the wireless environment.
In this paper, the researchers explore an advanced RIS-based wireless system where a base station communicates with multiple users over a multi-hop network of RISs. The key innovation is that the system can dynamically select the best sequence of RISs to reflect the signal to each user, rather than using a predetermined path. This allows the system to better optimize performance and ensure fair access for all users.
However, this flexibility also introduces a new challenge - the signals reflected by different RISs can interfere with each other, degrading overall performance. To address this, the researchers develop techniques to carefully coordinate the RIS reflections and user scheduling to mitigate interference while still achieving fair access.
Technical Explanation
The core of the proposed system is an optimization problem that jointly determines the optimal beam reflecting paths for each user and the corresponding beamforming vectors and scheduling policies. This is necessary to balance performance across different users while accounting for interference caused by undesired RIS scattering.
The researchers first derive the optimal RIS phase shifts and reflecting paths for each user based on their locations. They then group users into maximum independent sets to effectively mitigate interference. Finally, they propose a heuristic algorithm to iteratively update the beamforming vectors and scheduling policies to maximize the minimum data rate across all users.
Critical Analysis
The researchers acknowledge that the proposed multi-RIS, multi-path optimization problem is highly complex and challenging to solve exactly. While their heuristic algorithm provides a practical solution, it may not always achieve the global optimum. Further research is needed to develop more efficient optimization techniques for this class of problems.
Additionally, the paper does not consider practical implementation details, such as the overhead required for channel estimation and RIS configuration or the impact of imperfect RIS control. These factors could affect the real-world performance of such a system and should be investigated in future work.
Conclusion
This paper presents an innovative approach to leveraging reconfigurable intelligent surfaces (RISs) for multi-hop wireless communication. By dynamically selecting the optimal beam reflecting paths for each user and coordinating the RIS reflections, the proposed system can achieve better performance and fairness compared to existing methods. While the optimization problem is challenging, the researchers' heuristic solution provides a promising step towards realizing the full potential of RIS-enhanced wireless networks.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
Joint Training and Reflection Pattern Optimization for Non-Ideal RIS-Aided Multiuser Systems
Zhenyao He, Jindan Xu, Hong Shen, Wei Xu, Chau Yuen, Marco Di Renzo
0
0
Reconfigurable intelligent surface (RIS) is a promising technique to improve the performance of future wireless communication systems at low energy consumption. To reap the potential benefits of RIS-aided beamforming, it is vital to enhance the accuracy of channel estimation. In this paper, we consider an RIS-aided multiuser system with non-ideal reflecting elements, each of which has a phase-dependent reflecting amplitude, and we aim to minimize the mean-squared error (MSE) of the channel estimation by jointly optimizing the training signals at the user equipments (UEs) and the reflection pattern at the RIS. As examples the least squares (LS) and linear minimum MSE (LMMSE) estimators are considered. The considered problems do not admit simple solution mainly due to the complicated constraints pertaining to the non-ideal RIS reflecting elements. As far as the LS criterion is concerned, we tackle this difficulty by first proving the optimality of orthogonal training symbols and then propose a majorization-minimization (MM)-based iterative method to design the reflection pattern, where a semi-closed form solution is obtained in each iteration. As for the LMMSE criterion, we address the joint training and reflection pattern optimization problem with an MM-based alternating algorithm, where a closed-form solution to the training symbols and a semi-closed form solution to the RIS reflecting coefficients are derived, respectively. Furthermore, an acceleration scheme is proposed to improve the convergence rate of the proposed MM algorithms. Finally, simulation results demonstrate the performance advantages of our proposed joint training and reflection pattern designs.
4/1/2024
Power-Aware Sparse Reflect Beamforming in Active RIS-aided Interference Channels
Ruizhe Long, Hu Zhou, Ying-Chang Liang
0
0
Active reconfigurable intelligent surface (RIS) has attracted significant attention in wireless communications, due to its reflecting elements (REs) capable of reflecting incident signals with not only phase shifts but also amplitude amplifications. In this paper, we are interested in active RIS-aided interference channels in which $K$ user pairs share the same time and frequency resources with the aid of active RIS. Thanks to the promising amplitude amplification capability, activating a moderate number of REs, rather than all of them, is sufficient for the active RIS to mitigate cross-channel interferences. Motivated by this, we propose a power-aware sparse reflect beamforming design for the active RIS-aided interference channels, which allows the active RIS to flexibly adjust the number of activated REs for the sake of reducing hardware and power costs. Specifically, we establish the power consumption model in which only those activated REs consume the biasing and operation power that supports the amplitude amplification, yielding an $ell_0$-norm power consumption function. Based on the proposed model, we investigate a sum-rate maximization problem and an active RIS power minimization problem by carefully designing the sparse reflect beamforming vector. To solve these problems, we first replace the nonconvex $ell_0$-norm function with an iterative reweighted $ell_1$-norm function. Then, fractional programming is used to solve the sum-rate maximization, while semidefinite programming together with the difference-of-convex algorithm (DCA) is used to solve the active RIS power minimization. Numerical results show that the proposed sparse designs can notably increase the sum rate of user pairs and decrease the power consumption of active RIS in interference channels.
4/1/2024
Enhancing Path Selections with Interference Graphs in Multihop Relay Wireless Networks
Cao Vien Phung, Andre Drummond, Admela Jukan
0
0
The multihop relay wireless networks have gained traction due to the emergence of Reconfigurable Intelligent Surfaces (RISs) which can be used as relays in high frequency range wireless network, including THz or mmWave. To select paths in these networks, the transmission performance plays the key network in these networks. In this paper, we enhance and greatly simplify the path selection in multihop relay RIS enabled wireless networks with what we refer to as interference graphs. Interference graphs are created based on SNR model, conical and cylindrical beam shapes in the transmission and the related interference model. Once created, they can be simply and efficiently used to select valid paths, without overestimation of the effect of interference. The results show that decreased ordering of conflict selections in the graphs yields the best results, as compared to conservative approach that tolerates no interference.
6/14/2024
🖼️
Nonlocal Reconfigurable Intelligent Surfaces for Wireless Communication: Modeling and Physical Layer Aspects
Amine Mezghani, Faouzi Bellili, Ekram Hossain
0
0
Conventional Reconfigurable intelligent surfaces (RIS) for wireless communications have a local position-dependent (phase-gradient) scattering response on the surface. We consider more general RIS structures, called nonlocal (or redirective) RIS, that are capable of selectively manipulate the impinging waves depending on the incident angle. Redirective RIS have nonlocal wavefront-selective scattering behavior and can be implemented using multilayer arrays such as metalenses. We demonstrate that this more sophisticated type of surfaces has several advantages such as: lower overhead through coodebook-based reconfigurability, decoupled wave manipulations, and higher efficiency in multiuser scenarios via multifunctional operation. Additionally, redirective RIS architectures greatly benefit form the directional nature of wave propagation at high frequencies and can support integrated fronthaul and access (IFA) networks most efficiently. We also discuss the scalability and compactness issues and propose efficient nonlocal RIS architectures such as fractionated lens-based RIS and mirror-backed phase-masks structures that do not require additional control complexity and overhead while still offering better performance than conventional local RIS.
4/4/2024