Space-Time Continuum: Continuous Shape and Time State Estimation for Flexible Robots
0
Sign in to get full access
Overview
- Presents a novel approach for continuous shape and time state estimation of flexible robots
- Uses a space-time continuum representation to model the robot's shape and motion over time
- Combines sensing data with a probabilistic prior to estimate the robot's state in real-time
Plain English Explanation
The paper introduces a new way to model and estimate the shape and movement of flexible robots over time. Instead of just considering the robot's shape at a single point in time, the researchers use a "space-time continuum" representation that captures the robot's shape and position continuously.
This allows them to better estimate the robot's state by combining sensor data with a probabilistic model of how the robot should behave. The result is a system that can track a flexible robot's shape and motion in real-time, which is important for applications like surgery or search and rescue.
Technical Explanation
The key innovation in this paper is the use of a space-time continuum representation to model the robot's shape and motion. Rather than discretizing the robot into a series of rigid links, the researchers treat it as a continuous flexible structure that deforms over time.
This is formalized as a probabilistic prior that encodes assumptions about the robot's physical properties and dynamics. The researchers then combine this prior with sensor data, using techniques like Bayesian estimation, to continuously estimate the robot's shape and state.
The proposed approach is demonstrated through simulation and real-world experiments, showing improved tracking performance compared to previous methods that consider the robot's state at individual time steps.
Critical Analysis
The paper presents a compelling approach for modeling and estimating the state of flexible robots. By taking a continuous, holistic view of the robot's shape and motion, the researchers are able to better leverage sensor data and prior knowledge.
However, the proposed method does rely on a number of assumptions, such as the availability of an accurate prior model and the ability to observe the robot's shape through sensors. In real-world scenarios, these assumptions may not always hold, and further research would be needed to address potential sources of error or uncertainty.
Additionally, the computational complexity of the continuous estimation process could be a practical limitation, especially for resource-constrained systems. Exploring ways to balance accuracy and efficiency would be an important area for future work.
Conclusion
This paper introduces a novel space-time continuum representation for modeling and estimating the state of flexible robots. By considering the robot's shape and motion as a continuous process, the proposed approach can more effectively leverage sensor data and prior knowledge to track the robot's state in real-time.
While the method has some limitations, it represents an important step forward in the field of flexible robot control and estimation. Further development and validation of this technique could lead to significant advancements in applications such as surgical robotics, search and rescue, and other domains where the ability to precisely track a robot's shape and motion is critical.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
0
New!Space-Time Continuum: Continuous Shape and Time State Estimation for Flexible Robots
Spencer Teetaert, Sven Lilge, Jessica Burgner-Kahrs, Timothy D. Barfoot
This extended abstract introduces a novel method for continuous state estimation of continuum robots. We formulate the estimation problem as a factor-graph optimization problem using a novel Gaussian-process prior that is parameterized over both arclength and time. We use this to introduce the first continuous-time-and-space state estimation method for continuum robots.
Read more9/20/2024
👨🏫
0
Stochastic Adaptive Estimation in Polynomial Curvature Shape State Space for Continuum Robots
Guoqing Zhang, Long Wang
In continuum robotics, real-time robust shape estimation is crucial for planning and control tasks that involve physical manipulation in complex environments. In this paper, we present a novel stochastic observer-based shape estimation framework designed specifically for continuum robots. The shape state space is uniquely represented by the modal coefficients of a polynomial, enabled by leveraging polynomial curvature kinematics to describe the curvature distribution along the arclength. Our framework processes noisy measurements from limited discrete position, orientation, or pose sensors to estimate the shape state robustly. We derive a novel noise-weighted observability matrix, providing a detailed assessment of observability variations under diverse sensor configurations. To overcome the limitations of a single model, our observer employs the Interacting Multiple Model (IMM) method, coupled with Extended Kalman Filters (EKFs), to mix polynomial curvature models of different orders. The IMM approach, rooted in Markov processes, effectively manages multiple model scenarios by dynamically adapting to different polynomial orders based on real-time model probabilities. This adaptability is key to ensuring robust shape estimation of the robot's behaviors under various conditions. Our comprehensive analysis, supported by both simulation studies and experimental validations, confirms the robustness and accuracy of our proposed methods.
Read more8/30/2024
0
Incorporating Control Inputs in the Estimation of Continuous Mobile Robot Trajectories and Continuum Robot Shapes
Sven Lilge, Timothy D. Barfoot
Continuous-time batch state estimation using Gaussian processes is an efficient approach to estimate the trajectories of robots over time. In the past, relatively simple physics-motivated priors have been considered for such approaches, using assumptions such as constant velocity or acceleration. This paper presents an approach to incorporating exogenous control inputs, such as velocity or acceleration commands, into the continuous Gaussian process state-estimation framework. It is shown that this approach generalizes across different domains in robotics, making it applicable to both the estimation of continuous-time trajectories for mobile robots and continuum-robot shapes. Results show that incorporating control inputs leads to more informed priors, potentially requiring less measurements and estimation nodes to obtain accurate estimates. This makes the approach particularly useful in situations in which limited sensing is available.
Read more8/6/2024
🚀
0
Full State Estimation of Continuum Robots from Tip Velocities: A Cosserat-Theoretic Boundary Observer
Tongjia Zheng, Qing Han, Hai Lin
State estimation of robotic systems is essential to implementing feedback controllers, which usually provide better robustness to modeling uncertainties than open-loop controllers. However, state estimation of soft robots is very challenging because soft robots have theoretically infinite degrees of freedom while existing sensors only provide a limited number of discrete measurements. This work focuses on soft robotic manipulators, also known as continuum robots. We design an observer algorithm based on the well-known Cosserat rod theory, which models continuum robots by nonlinear partial differential equations (PDEs) evolving in geometric Lie groups. The observer can estimate all infinite-dimensional continuum robot states, including poses, strains, and velocities, by only sensing the tip velocity of the continuum robot, and hence it is called a ``boundary'' observer. More importantly, the estimation error dynamics is formally proven to be locally input-to-state stable. The key idea is to inject sequential tip velocity measurements into the observer in a way that dissipates the energy of the estimation errors through the boundary. The distinct advantage of this PDE-based design is that it can be implemented using any existing numerical implementation for Cosserat rod models. All theoretical convergence guarantees will be preserved, regardless of the discretization method. We call this property ``one design for any discretization''. Extensive numerical studies are included and suggest that the domain of attraction is large and the observer is robust to uncertainties of tip velocity measurements and model parameters.
Read more8/1/2024