UL-VIO: Ultra-lightweight Visual-Inertial Odometry with Noise Robust Test-time Adaptation
0
Sign in to get full access
Overview
- The paper introduces UL-VIO, an ultra-lightweight visual-inertial odometry (VIO) system with noise-robust test-time adaptation.
- VIO is the process of estimating a device's motion using both camera and inertial measurement unit (IMU) data.
- UL-VIO aims to provide high-accuracy motion tracking on resource-constrained devices like smartphones or drones.
Plain English Explanation
UL-VIO: Ultra-lightweight Visual-Inertial Odometry with Noise Robust Test-time Adaptation presents a new approach to visual-inertial odometry (VIO) - the process of estimating a device's motion using both camera and inertial sensor data. The key innovation is that UL-VIO is designed to be "ultra-lightweight," meaning it can run efficiently on resource-constrained devices like smartphones or drones.
Traditional VIO systems can be computationally expensive, making them difficult to run on small devices with limited processing power. UL-VIO addresses this by using a compact neural network architecture that can estimate the device's motion with high accuracy while using minimal computational resources.
Additionally, UL-VIO includes a "noise-robust test-time adaptation" capability. This means the system can automatically adapt to different environments or sensor conditions during use, without requiring manual retraining or recalibration. This makes UL-VIO more resilient to real-world noise and variations that can degrade the performance of traditional VIO approaches.
The goal of UL-VIO is to enable high-quality motion tracking on a wide range of devices, from smartphones to drones, opening up new applications for VIO technology in areas like robotics, augmented reality, and autonomous navigation.
Technical Explanation
UL-VIO: Ultra-lightweight Visual-Inertial Odometry with Noise Robust Test-time Adaptation presents a novel visual-inertial odometry (VIO) system designed for resource-constrained devices.
The key technical innovations include:
-
Compact Neural Network Architecture: UL-VIO uses a compact neural network that can accurately estimate the 6-DoF pose of a device (3D position and orientation) while requiring minimal computational resources. This is achieved through careful model design and optimization.
-
Noise-Robust Test-time Adaptation: UL-VIO includes an adaptation module that can automatically fine-tune the network's parameters during runtime to adapt to changes in the environment or sensor conditions. This helps maintain high accuracy even when faced with real-world noise and variations.
-
Sensor Fusion: UL-VIO fuses data from both the camera and inertial measurement unit (IMU) to achieve more robust and accurate motion tracking compared to using either sensor alone.
The paper evaluates UL-VIO on several public VIO benchmarks, demonstrating state-of-the-art performance while using a fraction of the computational resources of other approaches. This makes UL-VIO well-suited for deployment on resource-constrained platforms like smartphones, drones, and embedded systems.
Critical Analysis
The paper presents a compelling approach to visual-inertial odometry that addresses important practical concerns around computational efficiency and robustness to real-world conditions. The noise-robust test-time adaptation is a particularly interesting feature, as it can help maintain high accuracy without the need for manual retraining or recalibration.
However, the paper does not provide a comprehensive analysis of the system's limitations or potential failure modes. For example, it would be helpful to understand how UL-VIO performs in extreme environments (e.g., low-light conditions, high-speed motion) or when faced with sensor failures or occlusions.
Additionally, while the paper demonstrates strong results on public benchmarks, it would be valuable to see how UL-VIO fares in real-world deployments or in comparison to alternative VIO systems designed for resource-constrained devices.
Overall, UL-VIO: Ultra-lightweight Visual-Inertial Odometry with Noise Robust Test-time Adaptation presents an interesting and potentially impactful advancement in the field of visual-inertial odometry, but further research and real-world validation would be beneficial to fully assess its capabilities and limitations.
Conclusion
UL-VIO: Ultra-lightweight Visual-Inertial Odometry with Noise Robust Test-time Adaptation introduces a novel VIO system designed for resource-constrained devices. By using a compact neural network architecture and a noise-robust adaptation mechanism, UL-VIO can provide high-accuracy motion tracking while requiring minimal computational resources.
This advancement has the potential to enable new applications of VIO technology in areas like robotics, augmented reality, and autonomous navigation, where the ability to run sophisticated motion estimation algorithms on small, embedded devices is crucial. With further research and real-world validation, UL-VIO could become an important tool for developers working on these types of applications.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
0
UL-VIO: Ultra-lightweight Visual-Inertial Odometry with Noise Robust Test-time Adaptation
Jinho Park, Se Young Chun, Mingoo Seok
Data-driven visual-inertial odometry (VIO) has received highlights for its performance since VIOs are a crucial compartment in autonomous robots. However, their deployment on resource-constrained devices is non-trivial since large network parameters should be accommodated in the device memory. Furthermore, these networks may risk failure post-deployment due to environmental distribution shifts at test time. In light of this, we propose UL-VIO -- an ultra-lightweight (<1M) VIO network capable of test-time adaptation (TTA) based on visual-inertial consistency. Specifically, we perform model compression to the network while preserving the low-level encoder part, including all BatchNorm parameters for resource-efficient test-time adaptation. It achieves 36X smaller network size than state-of-the-art with a minute increase in error -- 1% on the KITTI dataset. For test-time adaptation, we propose to use the inertia-referred network outputs as pseudo labels and update the BatchNorm parameter for lightweight yet effective adaptation. To the best of our knowledge, this is the first work to perform noise-robust TTA on VIO. Experimental results on the KITTI, EuRoC, and Marulan datasets demonstrate the effectiveness of our resource-efficient adaptation method under diverse TTA scenarios with dynamic domain shifts.
Read more9/23/2024
0
Adaptive VIO: Deep Visual-Inertial Odometry with Online Continual Learning
Youqi Pan, Wugen Zhou, Yingdian Cao, Hongbin Zha
Visual-inertial odometry (VIO) has demonstrated remarkable success due to its low-cost and complementary sensors. However, existing VIO methods lack the generalization ability to adjust to different environments and sensor attributes. In this paper, we propose Adaptive VIO, a new monocular visual-inertial odometry that combines online continual learning with traditional nonlinear optimization. Adaptive VIO comprises two networks to predict visual correspondence and IMU bias. Unlike end-to-end approaches that use networks to fuse the features from two modalities (camera and IMU) and predict poses directly, we combine neural networks with visual-inertial bundle adjustment in our VIO system. The optimized estimates will be fed back to the visual and IMU bias networks, refining the networks in a self-supervised manner. Such a learning-optimization-combined framework and feedback mechanism enable the system to perform online continual learning. Experiments demonstrate that our Adaptive VIO manifests adaptive capability on EuRoC and TUM-VI datasets. The overall performance exceeds the currently known learning-based VIO methods and is comparable to the state-of-the-art optimization-based methods.
Read more5/28/2024
🤖
0
VIO-DualProNet: Visual-Inertial Odometry with Learning Based Process Noise Covariance
Dan Solodar, Itzik Klein
Visual-inertial odometry (VIO) is a vital technique used in robotics, augmented reality, and autonomous vehicles. It combines visual and inertial measurements to accurately estimate position and orientation. Existing VIO methods assume a fixed noise covariance for the inertial uncertainty. However, accurately determining in real-time the noise variance of the inertial sensors presents a significant challenge as the uncertainty changes throughout the operation leading to suboptimal performance and reduced accuracy. To circumvent this, we propose VIO-DualProNet, a novel approach that utilizes deep learning methods to dynamically estimate the inertial noise uncertainty in real-time. By designing and training a deep neural network to predict inertial noise uncertainty using only inertial sensor measurements, and integrating it into the VINS-Mono algorithm, we demonstrate a substantial improvement in accuracy and robustness, enhancing VIO performance and potentially benefiting other VIO-based systems for precise localization and mapping across diverse conditions.
Read more4/30/2024
0
Low Latency Visual Inertial Odometry with On-Sensor Accelerated Optical Flow for Resource-Constrained UAVs
Jonas Kuhne, Michele Magno, Luca Benini
Visual Inertial Odometry (VIO) is the task of estimating the movement trajectory of an agent from an onboard camera stream fused with additional Inertial Measurement Unit (IMU) measurements. A crucial subtask within VIO is the tracking of features, which can be achieved through Optical Flow (OF). As the calculation of OF is a resource-demanding task in terms of computational load and memory footprint, which needs to be executed at low latency, especially in robotic applications, OF estimation is today performed on powerful CPUs or GPUs. This restricts its use in a broad spectrum of applications where the deployment of such powerful, power-hungry processors is unfeasible due to constraints related to cost, size, and power consumption. On-sensor hardware acceleration is a promising approach to enable low latency VIO even on resource-constrained devices such as nano drones. This paper assesses the speed-up in a VIO sensor system exploiting a compact OF sensor consisting of a global shutter camera and an Application Specific Integrated Circuit (ASIC). By replacing the feature tracking logic of the VINS-Mono pipeline with data from this OF camera, we demonstrate a 49.4% reduction in latency and a 53.7% reduction of compute load of the VIO pipeline over the original VINS-Mono implementation, allowing VINS-Mono operation up to 50 FPS instead of 20 FPS on the quad-core ARM Cortex-A72 processor of a Raspberry Pi Compute Module 4.
Read more6/21/2024