AIRA: A Low-cost IR-based Approach Towards Autonomous Precision Drone Landing and NLOS Indoor Navigation
0
Sign in to get full access
Overview
• This paper presents AIRA, a low-cost infrared (IR)-based approach for autonomous precision drone landing and non-line-of-sight (NLOS) indoor navigation. • The system leverages IR-based sensing and machine learning to enable drones to land accurately and navigate indoors without relying on GPS. • The approach is designed to be a cost-effective alternative to existing solutions that often require expensive hardware and complex sensor setups.
Plain English Explanation
AIRA is a new technology that helps drones land and navigate indoors without using GPS. It uses infrared (IR) sensors and machine learning to figure out where the drone is and guide it to the right spot.
This is important because drones are often used in places where GPS doesn't work well, like inside buildings. Existing solutions for this problem can be expensive and complex. AIRA aims to provide a more affordable and simpler way for drones to land precisely and move around indoors without GPS.
The key idea behind AIRA is to use cheap IR sensors instead of relying on expensive specialized hardware. These IR sensors can detect patterns of light and heat, which the system then analyzes using machine learning algorithms to determine the drone's location and orientation. This allows the drone to navigate and land accurately even in places where GPS is not available.
Technical Explanation
The AIRA system uses a set of low-cost IR sensors mounted on the drone to detect environmental cues and landmarks. These IR signals are processed using computer vision and machine learning techniques to extract information about the drone's position and orientation relative to its surroundings.
For autonomous landing, AIRA leverages an IR target placed at the landing site. By tracking the IR signature of this target, the drone can precisely align itself and land accurately. For NLOS indoor navigation, the system builds a map of the environment by detecting and localizing IR beacons placed around the indoor space. This map is then used to guide the drone's movement through the building without relying on line-of-sight or GPS.
The authors evaluate AIRA's performance in both simulation and real-world experiments, demonstrating its ability to achieve precise landing and reliable indoor navigation at a fraction of the cost of existing solutions.
Critical Analysis
The paper presents a promising approach to address the challenges of drone landing and indoor navigation without GPS. The use of low-cost IR sensors is a novel and cost-effective solution compared to more complex sensor setups used in prior work.
However, the authors acknowledge that the system's performance may be affected by environmental factors, such as lighting conditions and interference from other IR sources. Further research is needed to assess the robustness of AIRA in diverse indoor environments and under varying lighting conditions.
Additionally, the security implications of the AIRA system should be carefully considered, as the reliance on IR beacons placed around the indoor environment could potentially be exploited by adversaries. The authors briefly mention the need for secure beacon deployment, but more comprehensive security measures may be required to ensure the system's resilience against malicious attacks.
Conclusion
The AIRA system presents a novel and cost-effective approach to autonomous drone landing and indoor navigation without GPS. By leveraging low-cost IR sensors and machine learning, the system can enable precise landing and reliable navigation in environments where traditional GPS-based solutions may not be feasible or practical.
The potential impact of this research extends beyond drone applications, as the underlying principles of IR-based sensing and localization could also be applied to other robotic and navigation systems that require accurate positioning in GPS-denied environments. Further development and real-world deployment of AIRA could lead to significant advancements in the field of aerial robotics and indoor navigation.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
0
AIRA: A Low-cost IR-based Approach Towards Autonomous Precision Drone Landing and NLOS Indoor Navigation
Yanchen Liu, Minghui Zhao, Kaiyuan Hou, Junxi Xia, Charlie Carver, Stephen Xia, Xia Zhou, Xiaofan Jiang
Automatic drone landing is an important step for achieving fully autonomous drones. Although there are many works that leverage GPS, video, wireless signals, and active acoustic sensing to perform precise landing, autonomous drone landing remains an unsolved challenge for palm-sized microdrones that may not be able to support the high computational requirements of vision, wireless, or active audio sensing. We propose AIRA, a low-cost infrared light-based platform that targets precise and efficient landing of low-resource microdrones. AIRA consists of an infrared light bulb at the landing station along with an energy efficient hardware photodiode (PD) sensing platform at the bottom of the drone. AIRA costs under 83 USD, while achieving comparable performance to existing vision-based methods at a fraction of the energy cost. AIRA requires only three PDs without any complex pattern recognition models to accurately land the drone, under $10$cm of error, from up to $11.1$ meters away, compared to camera-based methods that require recognizing complex markers using high resolution images with a range of only up to $1.2$ meters from the same height. Moreover, we demonstrate that AIRA can accurately guide drones in low light and partial non line of sight scenarios, which are difficult for traditional vision-based approaches.
Read more7/9/2024
🧪
0
A Multimodal Learning-based Approach for Autonomous Landing of UAV
Francisco Neves, Lu'is Branco, Maria Pereira, Rafael Claro, Andry Pinto
In the field of autonomous Unmanned Aerial Vehicles (UAVs) landing, conventional approaches fall short in delivering not only the required precision but also the resilience against environmental disturbances. Yet, learning-based algorithms can offer promising solutions by leveraging their ability to learn the intelligent behaviour from data. On one hand, this paper introduces a novel multimodal transformer-based Deep Learning detector, that can provide reliable positioning for precise autonomous landing. It surpasses standard approaches by addressing individual sensor limitations, achieving high reliability even in diverse weather and sensor failure conditions. It was rigorously validated across varying environments, achieving optimal true positive rates and average precisions of up to 90%. On the other hand, it is proposed a Reinforcement Learning (RL) decision-making model, based on a Deep Q-Network (DQN) rationale. Initially trained in sumlation, its adaptive behaviour is successfully transferred and validated in a real outdoor scenario. Furthermore, this approach demonstrates rapid inference times of approximately 5ms, validating its applicability on edge devices.
Read more5/22/2024
0
Fusion of Visual-Inertial Odometry with LiDAR Relative Localization for Cooperative Guidance of a Micro-Scale Aerial Vehicle
V'aclav Pritzl, Matouv{s} Vrba, Petr v{S}tv{e}p'an, Martin Saska
A novel relative localization approach for guidance of a micro-scale UAV by a well-equipped aerial robot fusing VIO with LiDAR is proposed in this paper. LiDAR-based localization is accurate and robust to challenging environmental conditions, but 3D LiDARs are relatively heavy and require large UAV platforms, in contrast to lightweight cameras. However, visual-based self-localization methods exhibit lower accuracy and can suffer from significant drift with respect to the global reference frame. To benefit from both sensory modalities, we focus on cooperative navigation in a heterogeneous team of a primary LiDAR-equipped UAV and a secondary micro-scale camera-equipped UAV. We propose a novel cooperative approach combining LiDAR relative localization data with VIO output on board the primary UAV to obtain an accurate pose of the secondary UAV. The pose estimate is used to precisely and reliably guide the secondary UAV along trajectories defined in the primary UAV reference frame. The experimental evaluation has shown the superior accuracy of our method to the raw VIO output and demonstrated its capability to guide the secondary UAV along desired trajectories while mitigating VIO drift. Thus, such a heterogeneous system can explore large areas with LiDAR precision, as well as visit locations inaccessible to the large LiDAR-carrying UAV platforms, as was showcased in a real-world cooperative mapping scenario.
Read more8/27/2024
0
Under-Canopy Navigation using Aerial Lidar Maps
Lucas Carvalho de Lima, Nicholas Lawrance, Kasra Khosoussi, Paulo Borges, Michael Bruenig
Autonomous navigation in unstructured natural environments poses a significant challenge. In goal navigation tasks without prior information, the limited look-ahead of onboard sensors utilised by robots compromises path efficiency. We propose a novel approach that leverages an above-the-canopy aerial map for improved ground robot navigation. Our system utilises aerial lidar scans to create a 3D probabilistic occupancy map, uniquely incorporating the uncertainty in the aerial vehicle's trajectory for improved accuracy. Novel path planning cost functions are introduced, combining path length with obstruction risk estimated from the probabilistic map. The D-Star Lite algorithm then calculates an optimal (minimum-cost) path to the goal. This system also allows for dynamic replanning upon encountering unforeseen obstacles on the ground. Extensive experiments and ablation studies in simulated and real forests demonstrate the effectiveness of our system.
Read more6/19/2024