An Automated Machine Learning Approach to Inkjet Printed Component Analysis: A Step Toward Smart Additive Manufacturing
0
Sign in to get full access
Overview
- Automated machine learning approach to analyze inkjet printed electronic components
- Aims to enable "smart" additive manufacturing by automating component inspection and quality control
- Leverages various machine learning models, including LightGBM, XGBoost, and ResNet
Plain English Explanation
This research explores using machine learning models to automate the analysis of inkjet printed electronic components. The goal is to enable "smart" additive manufacturing by automating the inspection and quality control of these printed components.
The researchers used a variety of machine learning algorithms, such as LightGBM, XGBoost, and ResNet, to analyze images of the printed components. This allowed them to automatically identify defects, measure critical dimensions, and assess the overall quality of the components.
By integrating this machine learning approach into the additive manufacturing process, the researchers aim to enable real-time monitoring and quality control. This could help improve the reliability and consistency of printed electronics, ultimately leading to more "smart" and efficient additive manufacturing.
Technical Explanation
The researchers used a dataset of images of inkjet printed electronic components, which they preprocessed and segmented to extract relevant features. They then trained various machine learning models, including LightGBM, XGBoost, and a custom ResNet architecture, to perform tasks such as defect detection, dimension measurement, and overall quality assessment.
The performance of these models was evaluated using various metrics, and the researchers found that the custom ResNet model outperformed the other approaches in most tasks. They also explored the use of transfer learning to further improve the model's performance.
Critical Analysis
The paper presents a promising approach to automating the inspection and quality control of inkjet printed electronic components. However, the researchers acknowledge that their dataset is limited in size and diversity, which may limit the generalizability of their findings. Additionally, the paper does not provide much discussion on the potential sources of error or uncertainty in the machine learning models, nor does it explore the robustness of the approach to variations in the printing process or component design.
Further research may be needed to address these limitations and to explore the integration of this machine learning-based approach into real-world additive manufacturing workflows. Nonetheless, the work demonstrates the potential of automated machine learning to enhance the efficiency and reliability of smart additive manufacturing.
Conclusion
This research presents an automated machine learning approach to analyzing inkjet printed electronic components, with the goal of enabling "smart" additive manufacturing. By leveraging various machine learning models, the researchers were able to automate tasks such as defect detection, dimension measurement, and overall quality assessment.
The findings of this work suggest that this approach has the potential to improve the reliability and consistency of printed electronics, ultimately leading to more efficient and effective additive manufacturing processes. While further research is needed to address the limitations of the current study, the work demonstrates the value of integrating machine learning into additive manufacturing workflows.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
0
An Automated Machine Learning Approach to Inkjet Printed Component Analysis: A Step Toward Smart Additive Manufacturing
Abhishek Sahu, Peter H. Aaen, Praveen Damacharla
In this paper, we present a machine learning based architecture for microwave characterization of inkjet printed components on flexible substrates. Our proposed architecture uses several machine learning algorithms and automatically selects the best algorithm to extract the material parameters (ink conductivity and dielectric properties) from on-wafer measurements. Initially, the mutual dependence between material parameters of the inkjet printed coplanar waveguides (CPWs) and EM-simulated propagation constants is utilized to train the machine learning models. Next, these machine learning models along with measured propagation constants are used to extract the ink conductivity and dielectric properties of the test prototypes. To demonstrate the applicability of our proposed approach, we compare and contrast four heuristic based machine learning models. It is shown that eXtreme Gradient Boosted Trees Regressor (XGB) and Light Gradient Boosting (LGB) algorithms perform best for the characterization problem under study.
Read more4/9/2024
🛠️
0
Explainable machine learning to enable high-throughput electrical conductivity optimization and discovery of doped conjugated polymers
Ji Wei Yoon, Adithya Kumar, Pawan Kumar, Kedar Hippalgaonkar, J Senthilnath, Vijila Chellappan
The combination of high-throughput experimentation techniques and machine learning (ML) has recently ushered in a new era of accelerated material discovery, enabling the identification of materials with cutting-edge properties. However, the measurement of certain physical quantities remains challenging to automate. Specifically, meticulous process control, experimentation and laborious measurements are required to achieve optimal electrical conductivity in doped polymer materials. We propose a ML approach, which relies on readily measured absorbance spectra, to accelerate the workflow associated with measuring electrical conductivity. The classification model accurately classifies samples with a conductivity > 25 to 100 S/cm, achieving a maximum of 100 % accuracy rate. For the subset of highly conductive samples, we employed a regression model to predict their conductivities, yielding an impressive test R2 value of 0.984. We tested the models with samples of the two highest conductivities (498 and 506 S/cm) and showed that they were able to correctly classify and predict the two extrapolative conductivities at satisfactory levels of errors. The proposed ML-assisted workflow results in an improvement in the efficiency of the conductivity measurements by 89 % of the maximum achievable using our experimental techniques. Furthermore, our approach addressed the common challenge of the lack of explainability in ML models by exploiting bespoke mathematical properties of the descriptors and ML model, allowing us to gain corroborated insights into the spectral influences on conductivity. Through this study, we offer an accelerated pathway for optimizing the properties of doped polymer materials while showcasing the valuable insights that can be derived from purposeful utilization of ML in experimental science.
Read more4/30/2024
🎯
0
Physics-Informed Machine Learning for Smart Additive Manufacturing
Rahul Sharma, Maziar Raissi, Y. B. Guo
Compared to physics-based computational manufacturing, data-driven models such as machine learning (ML) are alternative approaches to achieve smart manufacturing. However, the data-driven ML's black box nature has presented a challenge to interpreting its outcomes. On the other hand, governing physical laws are not effectively utilized to develop data-efficient ML algorithms. To leverage the advantages of ML and physical laws of advanced manufacturing, this paper focuses on the development of a physics-informed machine learning (PIML) model by integrating neural networks and physical laws to improve model accuracy, transparency, and generalization with case studies in laser metal deposition (LMD).
Read more7/16/2024
⛏️
0
Review of Machine Learning Methods for Additive Manufacturing of Functionally Graded Materials
Mohammad Karimzadeh, Deekshith Basvoju, Aleksandar Vakanski, Indrajit Charit, Fei Xu, Xinchang Zhang
Additive Manufacturing (AM) is a transformative manufacturing technology enabling direct fabrication of complex parts layer-be-layer from 3D modeling data. Among AM applications, the fabrication of Functionally Graded Materials (FGMs) has significant importance due to the potential to enhance component performance across several industries. FGMs are manufactured with a gradient composition transition between dissimilar materials, enabling the design of new materials with location-dependent mechanical and physical properties. This study presents a comprehensive review of published literature pertaining to the implementation of Machine Learning (ML) techniques in AM, with an emphasis on ML-based methods for optimizing FGMs fabrication processes. Through an extensive survey of the literature, this review article explores the role of ML in addressing the inherent challenges in FGMs fabrication and encompasses parameter optimization, defect detection, and real-time monitoring. The article also provides a discussion of future research directions and challenges in employing ML-based methods in AM fabrication of FGMs.
Read more7/26/2024