Can 3GPP New Radio Non-Terrestrial Networks Meet the IMT-2020 Requirements for Satellite Radio Interface Technology?

Read original: arXiv:2405.08569 - Published 5/15/2024 by Mikko Majamaa, Lauri Sormunen, Verneri Ronty, Henrik Martikainen, Jani Puttonen, Timo Hamalainen
Total Score

0

🔗

Sign in to get full access

or

If you already have an account, we'll log you in

Overview

  • The paper discusses the requirements for 5G satellite networks as defined by the International Telecommunication Union in the IMT-2020 standard.
  • It evaluates the feasibility of achieving these requirements through system simulations of 3rd Generation Partnership Project New Radio non-terrestrial networks with low Earth orbit satellites.
  • The focus is on analyzing the ability to meet key performance metrics like throughput, area traffic capacity, and spectral efficiency.

Plain English Explanation

The paper looks at the technical requirements for 5G networks that can be delivered using satellites, rather than traditional cell towers on the ground. The International Telecommunication Union set out these requirements in a standard called IMT-2020. The researchers wanted to see if it's possible for 5G satellite networks to actually meet these requirements.

To do this, they ran computer simulations of a 5G satellite network using technology from the 3rd Generation Partnership Project's New Radio standard for non-terrestrial networks. They focused on key measures of network performance like the total amount of data that can be transmitted, how efficiently the available radio spectrum is used, and how much coverage the network can provide in a given area.

The results suggest that the downlink (from satellite to user) performance targets can be met using user devices with two antennas. Interestingly, they also found that a network design with full frequency reuse (every satellite can use the full spectrum) may actually outperform a more conventional design with less frequency overlap, which is usually considered better for reducing interference. For the uplink (from user to satellite), they found that a single antenna on the user device is sufficient to meet the requirements.

Technical Explanation

The researchers used system simulations to evaluate the ability of 3GPP New Radio non-terrestrial networks (NTN) with low Earth orbit (LEO) satellites to meet the IMT-2020 requirements for 5G satellite radio interface technology. They focused on three key performance metrics: throughput, area traffic capacity, and spectral efficiency.

The simulations modeled the downlink (satellite to user) and uplink (user to satellite) performance separately. For the downlink, they found that the requirements could be met using user equipment (UE) with 2 receive antenna elements. Interestingly, they also observed that a frequency reuse factor of 1 (full spectrum reuse) outperformed a factor of 3 in the downlink with a dual-antenna setup. This is a surprising result, as frequency reuse factor 3 is typically considered better for reducing interference.

For the uplink, the researchers determined that 1 transmit antenna on the UE is sufficient to meet the requirements with a significant margin. This is an encouraging finding, since the uplink is generally more demanding than the downlink.

Critical Analysis

The paper provides a comprehensive evaluation of the feasibility of meeting the IMT-2020 requirements for 5G satellite networks. However, it acknowledges some limitations in the analysis. For example, the simulations do not account for the impact of user mobility or the challenges of handover between satellites.

Additionally, the paper does not explore the potential trade-offs or practical considerations involved in deploying such a satellite network, such as the cost, complexity, or launch logistics. Further research would be needed to fully assess the real-world viability of this technology.

It would also be valuable to see the researchers' analysis extended to other performance criteria specified in the IMT-2020 standard, such as latency, reliability, and connection density, to get a more complete picture of the satellite network's capabilities.

Conclusion

This paper demonstrates the potential for 5G satellite networks to meet the technical requirements set forth in the IMT-2020 standard, at least in simulation. The findings suggest that with the right antenna configurations, these satellite-based 5G networks could deliver acceptable levels of throughput, area traffic capacity, and spectral efficiency, even in areas not covered by traditional terrestrial networks.

While further research is needed to fully assess the practical feasibility and trade-offs of deploying such a system, this work represents an important step towards realizing the vision of ubiquitous 5G connectivity, including in remote or hard-to-reach locations, through the use of satellite technology.



This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!

Follow @aimodelsfyi on 𝕏 →

Related Papers

🔗

Total Score

0

Can 3GPP New Radio Non-Terrestrial Networks Meet the IMT-2020 Requirements for Satellite Radio Interface Technology?

Mikko Majamaa, Lauri Sormunen, Verneri Ronty, Henrik Martikainen, Jani Puttonen, Timo Hamalainen

The International Telecommunication Union defined the requirements for 5G in the International Mobile Telecommunications 2020 (IMT-2020) standard in 2017. Since then, advances in technology and standardization have made the ubiquitous deployment of 5G via satellite a practical possibility, for example, in locations where terrestrial networks (TNs) are not available. However, it may be difficult for satellite networks to achieve the same performance as TNs. To address this, the IMT-2020 requirements for satellite radio interface technology have recently been established. In this paper, these requirements are evaluated through system simulations for the 3rd Generation Partnership Project New Radio non-terrestrial networks with a low Earth orbit satellite. The focus is on the throughput, area traffic capacity, and spectral efficiency requirements. It is observed that the downlink (DL) requirements can be met for user equipment with 2 receive antenna elements. The results also reveal that frequency reuse factor 1 (FRF1) may outperform FRF3 in DL with a dual-antenna setup, which is a surprising finding since FRF3 is typically considered to outperform FRF1 due to better interference reduction. For uplink (UL), 1 transmit antenna is sufficient to meet the requirements by a relatively large margin - a promising result given that UL is generally more demanding.

Read more

5/15/2024

Throughput Requirements for RAN Functional Splits in 3D-Networks
Total Score

0

Throughput Requirements for RAN Functional Splits in 3D-Networks

MohammadAmin Vakilifard, Tim Due, Mohammad Rihan, Maik Roper, Dirk Wubben, Carsten Bockelmann, Armin Dekorsy

The rapid growth of non-terrestrial communication necessitates its integration with existing terrestrial networks, as highlighted in 3GPP Releases 16 and 17. This paper analyses the concept of functional splits in 3D-Networks. To manage this complex structure effectively, the adoption of a Radio Access Network (RAN) architecture with Functional Split (FS) offers advantages in flexibility, scalability, and cost-efficiency. RAN achieves this by disaggregating functionalities into three separate units. Analogous to the terrestrial network approach, 3GPP is extending this concept to non-terrestrial platforms as well. This work presents a general analysis of the requested Fronthaul (FH) data rate on feeder link between a non-terrestrial platform and the ground-station. Each split option is a trade-of between FH data rate and the respected complexity. Since flying nodes face more limitations regarding power consumption and complexity on board in comparison to terrestrial ones, we are investigating the split options between lower and higher physical layer.

Read more

5/27/2024

🤿

Total Score

0

Thermal Radiation (TR) mode: A Deployment Perspective for 5G NR

Haneet Kour, Rakesh Kumar Jha, Sanjeev Jain, Shubha Jain

The 5G New Radio NR technology is under standardization process by 3GPP to provide outline for a new radio interface for the next generation of cellular networks. The aim of the 5G networks include not only to provide enhanced capacity coverage but also support advanced services such as enhanced mobile broadband (eMBB) Ultra-Reliable Low Latency Communication URLLC massive Machine Type Communication mMTC. Key features of NR include Ultra lean carrier design to minimize the power consumption by limiting the always-on signal transmissions and to reduce interference in the neighboring cells . Another feature is the use of massive number of antennas for transmission as well as reception of signals. This rise in the number of antennas to provide a greater coverage brings about various challenges and impact in the system. With the increase in investigations in the mmWave frequencies, there is a need to investigate the health hazards they have on human body and the environment at large. This paper intends to provide an insight into the harmful impacts of Radio Frequency RF fields. The radiation metric to study the RF impact for far field is power density and for near field is Specific Absorption Rate SAR. These are the two main EM radiation metrics to find out the exposure due to uplink and downlink phenomenon in mobile communications. Mobile communication systems are addressed particularly to discuss the Electromagnetic EM Radiation impact as smart phones are used in close proximity to the body. A proposal in the form of Thermal Radiation TR mode is given to reduce the radiations emitted from a mobile phone. The performance of the proposed mode is validated from the results by achieving reduced power density, complexity and exposure ratio.

Read more

7/26/2024

Emerging Technologies for 6G Non-Terrestrial-Networks: From Academia to Industrial Applications
Total Score

0

Emerging Technologies for 6G Non-Terrestrial-Networks: From Academia to Industrial Applications

Cong T. Nguyen, Yuris Mulya Saputra, Nguyen Van Huynh, Tan N. Nguyen, Dinh Thai Hoang, Diep N Nguyen, Van-Quan Pham, Miroslav Voznak, Symeon Chatzinotas, Dinh-Hieu Tran

Terrestrial networks form the fundamental infrastructure of modern communication systems, serving more than 4 billion users globally. However, terrestrial networks are facing a wide range of challenges, from coverage and reliability to interference and congestion. As the demands of the 6G era are expected to be much higher, it is crucial to address these challenges to ensure a robust and efficient communication infrastructure for the future. To address these problems, Non-terrestrial Network (NTN) has emerged to be a promising solution. NTNs are communication networks that leverage airborne (e.g., unmanned aerial vehicles) and spaceborne vehicles (e.g., satellites) to facilitate ultra-reliable communications and connectivity with high data rates and low latency over expansive regions. This article aims to provide a comprehensive survey on the utilization of network slicing, Artificial Intelligence/Machine Learning (AI/ML), and Open Radio Access Network (ORAN) to address diverse challenges of NTNs from the perspectives of both academia and industry. Particularly, we first provide an in-depth tutorial on NTN and the key enabling technologies including network slicing, AI/ML, and ORAN. Then, we provide a comprehensive survey on how network slicing and AI/ML have been leveraged to overcome the challenges that NTNs are facing. Moreover, we present how ORAN can be utilized for NTNs. Finally, we highlight important challenges, open issues, and future research directions of NTN in the 6G era.

Read more

7/4/2024