Deep Learning-based Machine Condition Diagnosis using Short-time Fourier Transformation Variants
0
Sign in to get full access
Overview
- This study explores the use of deep learning techniques for machine condition diagnosis, specifically focusing on the application of Short-time Fourier Transformation (STFT) variants.
- The research aims to develop an effective method for identifying motor faults using deep learning models trained on STFT-based data representations.
- The study is supported by the ASTI-GAA Project MaSense of the Department of Science and Technology - Advanced Science and Technology Institute (DOST-ASTI) in the Philippines.
Plain English Explanation
Deep learning is a powerful machine learning technique that can be used to analyze complex data, such as the vibration signals generated by industrial machinery. In this study, the researchers used a type of signal processing called Short-time Fourier Transformation (STFT) to convert the vibration data into a format that could be more easily analyzed by deep learning models.
The goal was to develop a system that could accurately diagnose motor faults based on the STFT-processed data. This is important because early detection of motor issues can help prevent costly breakdowns and downtime in industrial settings.
The researchers trained deep learning models, such as convolutional neural networks, to classify different types of motor faults based on the STFT data. The models were able to learn patterns in the data that allowed them to accurately identify the various fault conditions.
Technical Explanation
The researchers investigated the use of Short-time Fourier Transformation (STFT) variants as a preprocessing step for deep learning-based machine condition diagnosis. STFT is a technique that can convert time-domain vibration signals into a time-frequency representation, which can provide valuable information about the underlying machine dynamics.
The researchers evaluated several STFT-based data representations, including the standard STFT, the Welch STFT, and the Tukey STFT. These representations were then used as input to deep learning models, such as convolutional neural networks (CNNs), for the task of motor fault classification.
The performance of the deep learning models was assessed on a dataset of vibration signals collected from a laboratory setup with different motor fault conditions. The results showed that the deep learning models trained on the STFT-based data representations were able to achieve high accuracy in identifying the various motor faults.
Critical Analysis
The study demonstrates the potential of deep learning-based approaches for machine condition diagnosis using STFT-based data representations. The researchers have shown that the deep learning models can effectively learn the patterns in the STFT data, allowing for accurate identification of motor faults.
However, the study does not address some potential limitations and areas for further research. For example, the dataset used in the study was collected in a controlled laboratory setting, and the performance of the models on real-world industrial data may differ. Additionally, the interpretability of the deep learning models' decision-making process is not explored, which could be important for gaining trust in the diagnostic system.
Further research could investigate the performance of the deep learning models on larger and more diverse datasets, as well as explore techniques for improving the interpretability of the models' predictions. Fourier controller networks and other physics-informed approaches could also be explored to enhance the robustness and generalizability of the diagnostic system.
Conclusion
This study demonstrates the potential of deep learning-based approaches for machine condition diagnosis using STFT-based data representations. The deep learning models were able to effectively learn the patterns in the STFT data, allowing for accurate identification of motor faults. While the study shows promising results, further research is needed to address potential limitations and explore ways to improve the interpretability and robustness of the diagnostic system.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
0
Deep Learning-based Machine Condition Diagnosis using Short-time Fourier Transformation Variants
Eduardo Jr Piedad, Zherish Galvin Mayordo, Eduardo Prieto-Araujo, Oriol Gomis-Bellmunt
In motor condition diagnosis, electrical current signature serves as an alternative feature to vibration-based sensor data, which is a more expensive and invasive method. Machine learning (ML) techniques have been emerging in diagnosing motor conditions using only motor phase current signals. This study converts time-series motor current signals to time-frequency 2D plots using Short-time Fourier Transform (STFT) methods. The motor current signal dataset consists of 3,750 sample points with five classes - one healthy and four synthetically-applied motor fault conditions, and with five loading conditions: 0, 25, 50, 75, and 100%. Five transformation methods are used on the dataset: non-overlap and overlap STFTs, non-overlap and overlap realigned STFTs, and synchrosqueezed STFT. Then, deep learning (DL) models based on the previous Convolutional Neural Network (CNN) architecture are trained and validated from generated plots of each method. The DL models of overlap-STFT, overlap R-STFT, non-overlap STFT, non-overlap R-STFT, and synchrosqueezed-STFT performed exceptionally with an average accuracy of 97.65, 96.03, 96.08, 96.32, and 88.27%, respectively. Four methods outperformed the previous best ML method with 93.20% accuracy, while all five outperformed previous 2D-plot-based methods with accuracy of 80.25, 74.80, and 82.80%, respectively, using the same dataset, same DL architecture, and validation steps.
Read more8/20/2024
0
Exploring Wavelet Transformations for Deep Learning-based Machine Condition Diagnosis
Eduardo Jr Piedad, Christian Ainsley Del Rosario, Eduardo Prieto-Araujo, Oriol Gomis-Bellmunt
Deep learning (DL) strategies have recently been utilized to diagnose motor faults by simply analyzing motor phase current signals, offering a less costly and non-intrusive alternative to vibration sensors. This research transforms these time-series current signals into time-frequency 2D representations via Wavelet Transform (WT). The dataset for motor current signals includes 3,750 data points across five categories: one representing normal conditions and four representing artificially induced faults, each under five different load conditions: 0, 25, 50, 75, and 100%. The study employs five WT-based techniques: WT-Amor, WT-Bump, WT-Morse, WSST-Amor, and WSST-Bump. Subsequently, five DL models adopting prior Convolutional Neural Network (CNN) architecture were developed and tested using the transformed 2D plots from each method. The DL models for WT-Amor, WT-Bump, and WT-Morse showed remarkable effectiveness with peak model accuracy of 90.93, 89.20, and 93.73%, respectively, surpassing previous 2D-image-based methods that recorded accuracy of 80.25, 74.80, and 82.80% respectively using the identical dataset and validation protocol. Notably, the WT-Morse approach slightly exceeded the formerly highest ML technique, achieving a 93.20% accuracy. However, the two WSST methods that utilized synchrosqueezing techniques faced difficulty accurately classifying motor faults. The performance of Wavelet-based deep learning methods offers a compelling alternative for machine condition monitoring.
Read more8/20/2024
💬
0
Fault Analysis And Predictive Maintenance Of Induction Motor Using Machine Learning
Kavana Venkatesh, Neethi M
Induction motors are one of the most crucial electrical equipment and are extensively used in industries in a wide range of applications. This paper presents a machine learning model for the fault detection and classification of induction motor faults by using three phase voltages and currents as inputs. The aim of this work is to protect vital electrical components and to prevent abnormal event progression through early detection and diagnosis. This work presents a fast forward artificial neural network model to detect some of the commonly occurring electrical faults like overvoltage, under voltage, single phasing, unbalanced voltage, overload, ground fault. A separate model free monitoring system wherein the motor itself acts like a sensor is presented and the only monitored signals are the input given to the motor. Limits for current and voltage values are set for the faulty and healthy conditions, which is done by a classifier. Real time data from a 0.33 HP induction motor is used to train and test the neural network. The model so developed analyses the voltage and current values given at a particular instant and classifies the data into no fault or the specific fault. The model is then interfaced with a real motor to accurately detect and classify the faults so that further necessary action can be taken.
Read more9/17/2024
0
Interpretable modulated differentiable STFT and physics-informed balanced spectrum metric for freight train wheelset bearing cross-machine transfer fault diagnosis under speed fluctuations
Chao He, Hongmei Shi, Ruixin Li, Jianbo Li, ZuJun Yu
The service conditions of wheelset bearings has a direct impact on the safe operation of railway heavy haul freight trains as the key components. However, speed fluctuation of the trains and few fault samples are the two main problems that restrict the accuracy of bearing fault diagnosis. Therefore, a cross-machine transfer diagnosis (pyDSN) network coupled with interpretable modulated differentiable short-time Fourier transform (STFT) and physics-informed balanced spectrum quality metric is proposed to learn domain-invariant and discriminative features under time-varying speeds. Firstly, due to insufficiency in extracting extract frequency components of time-varying speed signals using fixed windows, a modulated differentiable STFT (MDSTFT) that is interpretable with STFT-informed theoretical support, is proposed to extract the robust time-frequency spectrum (TFS). During training process, multiple windows with different lengths dynamically change. Also, in addition to the classification metric and domain discrepancy metric, we creatively introduce a third kind of metric, referred to as the physics-informed metric, to enhance transferable TFS. A physics-informed balanced spectrum quality (BSQ) regularization loss is devised to guide an optimization direction for MDSTFT and model. With it, not only can model acquire high-quality TFS, but also a physics-restricted domain adaptation network can be also acquired, making it learn real-world physics knowledge, ultimately diminish the domain discrepancy across different datasets. The experiment is conducted in the scenario of migrating from the laboratory datasets to the freight train dataset, indicating that the hybrid-driven pyDSN outperforms existing methods and has practical value.
Read more6/19/2024