Development of a full-Scale approach to predict overlay reflective crack
0
🌐
Sign in to get full access
Overview
- Resurfacing deteriorated concrete roads with asphalt is a common rehabilitation practice, but can lead to reflective cracks developing shortly after.
- This paper presents a new accelerated full-scale testing approach to study the growth of reflective cracks in asphalt overlays.
- Two hydraulic actuators were used to simulate a moving dual-tire assembly at a high rate, allowing the researchers to fully crack test sections in less than an hour.
- The initiation and propagation of reflective cracks were closely monitored using crack detectors and a camera.
- This testing protocol offers a repeatable and efficient way to investigate different overlay configurations and identify optimal designs to prevent reflective cracking.
Plain English Explanation
Concrete roads can deteriorate over time, so a common solution is to resurface them with a layer of asphalt. However, this can lead to new cracks appearing in the asphalt shortly after, reflecting the cracks or joints in the underlying concrete. Researchers wanted to better understand this reflective cracking problem and find ways to prevent it.
They developed a special testing setup that could quickly simulate the effects of heavy vehicle tires passing over a cracked concrete road. Imagine a machine with two giant mechanical "tires" that could rapidly roll back and forth over a test section, putting enormous pressure on the road surface. This allowed the researchers to fully crack the asphalt in less than an hour, rather than waiting months or years for natural cracking to occur.
The researchers used sensors and cameras to closely monitor how the cracks formed and spread through the asphalt layer. By testing different asphalt overlay designs, they aimed to identify the best configurations to prevent reflective cracking and optimize the resurfacing process.
Technical Explanation
The core of the testing apparatus was two hydraulic actuators that could simulate the movement of a dual-tire vehicle assembly. Each load cycle consisted of three steps: the tires approaching the discontinuity (e.g. joint or crack) in the underlying concrete, moving across it, and then leaving. This cycling occurred at a rate of over 5,000 wheel passes per hour, allowing the researchers to fully crack the test sections in less than an hour.
Two different asphalt overlay configurations were tested and compared. Crack detectors and a camera were used to explicitly document the initiation and propagation of reflective cracks in the asphalt. This data allowed the researchers to systematically study the effects of different overlay designs on reflective cracking behavior.
Critical Analysis
The paper acknowledges that the accelerated nature of the testing may not fully capture the long-term behavior of reflective cracking under real-world conditions. Factors like temperature changes, moisture, and cumulative fatigue damage over years of use were not replicated. Further research would be needed to validate the findings from this rapid testing approach.
Additionally, the paper only examined two specific overlay configurations. There may be other design parameters, material properties, or construction techniques that could further improve performance against reflective cracking. Expanding the scope of testing to explore a wider range of solutions would provide more comprehensive insights.
Nonetheless, the testing protocol developed in this research offers a valuable new tool for efficiently screening overlay designs and identifying promising candidates for field trials and long-term monitoring. The ability to rapidly simulate reflective cracking under controlled conditions is a significant advancement compared to relying solely on slow, real-world observations.
Conclusion
This research presents an innovative accelerated testing approach to study reflective cracking in asphalt overlays for deteriorated concrete roads. By using hydraulic actuators to rapidly simulate heavy vehicle loading, the researchers were able to fully crack test sections in less than an hour, allowing them to systematically compare different overlay configurations.
The insights gained from this efficient testing method can help highway agencies and paving contractors optimize the resurfacing process and develop more durable overlay designs that are resistant to reflective cracking. Preventing this type of premature cracking can extend the service life of rehabilitated road infrastructure, saving time and money on future maintenance and reconstruction.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
🌐
0
Development of a full-Scale approach to predict overlay reflective crack
Zehui Zhu, Imad L. Al-Qadi
Resurfacing a moderately deteriorated Portland cement concrete (PCC) pavement with asphalt concrete (AC) layers is considered an efficient rehabilitation practice. However, reflective cracks may develop shortly after resurfacing because of discontinuities (e.g. joints and cracks) in existing PCC pavement. In this paper, a new accelerated full-scale testing approach was developed to study reflective crack growth in AC overlays. Two hydraulic actuators were used to simulate a moving dual-tire assembly with a loading rate of more than five-thousand-wheel passes per hour. A load cycle consists of three steps, simulating a tire approaching, moving across, and leaving a PCC discontinuity. Experiments were conducted to compare the reflective crack behaviour of two overlay configurations. Both test sections were fully cracked in less than an hour. The initiation and propagation of reflective cracks were explicitly documented using crack detectors in conjunction with a camera. The proposed full-scale testing protocol offers a repeatable and efficient approach to systematically investigate the effects of various overlay configurations, thus enabling the identification of optimal design against reflective cracking.
Read more4/1/2024
👁️
0
Vision-Based Adaptive Robotics for Autonomous Surface Crack Repair
Joshua Genova, Eric Cabrera, Vedhus Hoskere
Surface cracks in infrastructure can lead to significant deterioration and costly maintenance if not efficiently repaired. Manual repair methods are labor-intensive, time-consuming, and imprecise and thus difficult to scale to large areas. Breakthroughs in robotic perception and manipulation have advanced autonomous crack repair, but proposed methods lack end-to-end testing and adaptability to changing crack size. This paper presents an adaptive, autonomous system for surface crack detection and repair using robotics with advanced sensing technologies. The system uses an RGB-D camera for crack detection, a laser scanner for precise measurement, and an extruder and pump for material deposition. A novel validation procedure with 3D-printed crack specimens simulates real-world cracks and ensures testing repeatability. Our study shows that an adaptive system for crack filling is more efficient and effective than a fixed-speed approach, with experimental results confirming precision and consistency. This research paves the way for versatile, reliable robotic infrastructure maintenance.
Read more7/25/2024
🔎
0
Automated Pavement Cracks Detection and Classification Using Deep Learning
Selvia Nafaa, Hafsa Essam, Karim Ashour, Doaa Emad, Rana Mohamed, Mohammed Elhenawy, Huthaifa I. Ashqar, Abdallah A. Hassan, Taqwa I. Alhadidi
Monitoring asset conditions is a crucial factor in building efficient transportation asset management. Because of substantial advances in image processing, traditional manual classification has been largely replaced by semi-automatic/automatic techniques. As a result, automated asset detection and classification techniques are required. This paper proposes a methodology to detect and classify roadway pavement cracks using the well-known You Only Look Once (YOLO) version five (YOLOv5) and version 8 (YOLOv8) algorithms. Experimental results indicated that the precision of pavement crack detection reaches up to 67.3% under different illumination conditions and image sizes. The findings of this study can assist highway agencies in accurately detecting and classifying asset conditions under different illumination conditions. This will reduce the cost and time that are associated with manual inspection, which can greatly reduce the cost of highway asset maintenance.
Read more6/13/2024
🤯
0
Causal inference approach to appraise long-term effects of maintenance policy on functional performance of asphalt pavements
Lingyun You, Nanning Guo, Zhengwu Long, Fusong Wang, Chundi Si, Aboelkasim Diab
Asphalt pavements as the most prevalent transportation infrastructure, are prone to serious traffic safety problems due to functional or structural damage caused by stresses or strains imposed through repeated traffic loads and continuous climatic cycles. The good quality or high serviceability of infrastructure networks is vital to the urbanization and industrial development of nations. In order to maintain good functional pavement performance and extend the service life of asphalt pavements, the long-term performance of pavements under maintenance policies needs to be evaluated and favorable options selected based on the condition of the pavement. A major challenge in evaluating maintenance policies is to produce valid treatments for the outcome assessment under the control of uncertainty of vehicle loads and the disturbance of freeze-thaw cycles in the climatic environment. In this study, a novel causal inference approach combining a classical causal structural model and a potential outcome model framework is proposed to appraise the long-term effects of four preventive maintenance treatments for longitudinal cracking over a 5-year period of upkeep. Three fundamental issues were brought to our attention: 1) detection of causal relationships prior to variables under environmental loading (identification of causal structure); 2) obtaining direct causal effects of treatment on outcomes excluding covariates (identification of causal effects); and 3) sensitivity analysis of causal relationships. The results show that the method can accurately evaluate the effect of preventive maintenance treatments and assess the maintenance time to cater well for the functional performance of different preventive maintenance approaches. This framework could help policymakers to develop appropriate maintenance strategies for pavements.
Read more7/4/2024