Direct Zernike Coefficient Prediction from Point Spread Functions and Extended Images using Deep Learning
0
🔮
Sign in to get full access
Overview
- Optical imaging can be significantly degraded by system and sample-induced aberrations.
- Existing adaptive optics systems typically use iterative search algorithms to correct these aberrations and improve image quality.
- This study demonstrates the use of convolutional neural networks to directly predict the Zernike coefficients that characterize the optical aberration from two to three phase-diverse optical images.
Plain English Explanation
Optical imaging systems, like cameras and microscopes, can sometimes produce blurry or distorted images due to imperfections in the optical components or the sample being imaged. These imperfections, known as aberrations, can severely degrade image quality. Existing systems typically use complex algorithms that iteratively adjust the optics to try to correct these aberrations and improve the image.
In this study, the researchers explore a different approach using convolutional neural networks. Their method directly predicts the specific aberrations present in the optical system from just two or three "phase-diverse" images - images captured with slightly different focus settings. By understanding the exact nature of the aberrations, the system can then apply the appropriate corrections to produce a high-quality image.
The researchers tested their approach on a large dataset of simulated images, and found that it could accurately predict the aberrations using only three phase-diverse images, with a low error rate. They also showed that the same method could be applied to predict the aberrations in more complex, extended samples, not just simple points of light.
This is a promising technique that could lead to faster, more accurate adaptive optics systems that can improve image quality without the need for complex iterative algorithms. It has the potential to benefit a wide range of optical imaging applications, from microscopy to astronomy.
Technical Explanation
The researchers trained a convolutional neural network to directly predict the Zernike coefficients, which are a mathematical representation of the optical aberrations present in the system. They evaluated the network on a dataset of 600,000 simulated point spread function (PSF) images, where the aberrations were randomly generated using the first 25 Zernike coefficients.
The results showed that using just three phase-diverse images - captured above, below, and at the focal plane - the network could achieve a low root mean square error (RMSE) of 0.10 radians on the simulated PSF dataset. Furthermore, the same approach was able to accurately predict the Zernike modes for simulated extended 2D samples, maintaining a comparable RMSE of 0.15 radians.
The researchers demonstrated that this method is effective with a single prediction step, and can also be iterated a small number of times to further improve the accuracy. This simple and straightforward technique provides a rapid and accurate way to predict the necessary aberration corrections, paving the way for evaluation on real-world datasets and potential integration into practical adaptive optics systems.
Critical Analysis
The paper presents a promising approach to addressing the challenge of optical aberrations, but it is important to consider some potential limitations and areas for further research.
While the results on the simulated dataset are encouraging, it will be crucial to evaluate the method's performance on real-world data, which may involve more complex aberrations and noise sources. The researchers acknowledge this need for further validation on experimental data.
Additionally, the current implementation relies on the availability of multiple phase-diverse images, which may not always be feasible in all imaging scenarios. Exploring ways to achieve accurate aberration prediction from a single image, or with fewer input images, could expand the method's applicability.
Another area for further investigation is the scalability of the approach to higher-order Zernike modes and more complex aberration patterns. The study focused on the first 25 Zernike coefficients, but real-world systems may require the correction of higher-order modes for optimal performance.
Despite these potential limitations, the researchers have presented a compelling approach that has the potential to significantly simplify and improve adaptive optics systems. Further development and validation of this technique could lead to important advancements in various optical imaging applications.
Conclusion
This study demonstrates the use of convolutional neural networks to directly predict the optical aberrations present in an imaging system from a small number of phase-diverse images. The results on simulated data show that this approach can accurately characterize the aberrations, paving the way for rapid and effective adaptive optics correction.
The proposed technique has the potential to simplify the implementation of adaptive optics systems and improve image quality across a wide range of optical imaging applications, from microscopy to astronomy. As the method is further validated on real-world datasets and refined to address potential limitations, it could become a valuable tool for researchers and imaging practitioners.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
🔮
0
Direct Zernike Coefficient Prediction from Point Spread Functions and Extended Images using Deep Learning
Yong En Kok (School of Computer Science, University of Nottingham, Nottingham, UK), Alexander Bentley (Optics and Photonics Group, Department of Electrical and Electronic Engineering, University of Nottingham, Nottingham, UK), Andrew Parkes (School of Computer Science, University of Nottingham, Nottingham, UK), Amanda J. Wright (Optics and Photonics Group, Department of Electrical and Electronic Engineering, University of Nottingham, Nottingham, UK), Michael G. Somekh (Optics and Photonics Group, Department of Electrical and Electronic Engineering, University of Nottingham, Nottingham, UK, Research Center for Humanoid Sensing, Zhejiang Laboratory Hangzhou, China), Michael Pound (School of Computer Science, University of Nottingham, Nottingham, UK)
Optical imaging quality can be severely degraded by system and sample induced aberrations. Existing adaptive optics systems typically rely on iterative search algorithm to correct for aberrations and improve images. This study demonstrates the application of convolutional neural networks to characterise the optical aberration by directly predicting the Zernike coefficients from two to three phase-diverse optical images. We evaluated our network on 600,000 simulated Point Spread Function (PSF) datasets randomly generated within the range of -1 to 1 radians using the first 25 Zernike coefficients. The results show that using only three phase-diverse images captured above, below and at the focal plane with an amplitude of 1 achieves a low RMSE of 0.10 radians on the simulated PSF dataset. Furthermore, this approach directly predicts Zernike modes simulated extended 2D samples, while maintaining a comparable RMSE of 0.15 radians. We demonstrate that this approach is effective using only a single prediction step, or can be iterated a small number of times. This simple and straightforward technique provides rapid and accurate method for predicting the aberration correction using three or less phase-diverse images, paving the way for evaluation on real-world dataset.
Read more4/24/2024
🧠
0
CeCNN: Copula-enhanced convolutional neural networks in joint prediction of refraction error and axial length based on ultra-widefield fundus images
Chong Zhong, Yang Li, Danjuan Yang, Meiyan Li, Xingyao Zhou, Bo Fu, Catherine C. Liu, A. H. Welsh
The ultra-widefield (UWF) fundus image is an attractive 3D biomarker in AI-aided myopia screening because it provides much richer myopia-related information. Though axial length (AL) has been acknowledged to be highly related to the two key targets of myopia screening, Spherical Equivalence (SE) measurement and high myopia diagnosis, its prediction based on the UWF fundus image is rarely considered. To save the high expense and time costs of measuring SE and AL, we propose the Copula-enhanced Convolutional Neural Network (CeCNN), a one-stop UWF-based ophthalmic AI framework to jointly predict SE, AL, and myopia status. The CeCNN formulates a multiresponse regression that relates multiple dependent discrete-continuous responses and the image covariate, where the nonlinearity of the association is modeled by a backbone CNN. To thoroughly describe the dependence structure among the responses, we model and incorporate the conditional dependence among responses in a CNN through a new copula-likelihood loss. We provide statistical interpretations of the conditional dependence among responses, and reveal that such dependence is beyond the dependence explained by the image covariate. We heuristically justify that the proposed loss can enhance the estimation efficiency of the CNN weights. We apply the CeCNN to the UWF dataset collected by us and demonstrate that the CeCNN sharply enhances the predictive capability of various backbone CNNs. Our study evidences the ophthalmology view that besides SE, AL is also an important measure to myopia.
Read more8/19/2024
🧠
0
Coordinate-based neural representations for computational adaptive optics in widefield microscopy
Iksung Kang, Qinrong Zhang, Stella X. Yu, Na Ji
Widefield microscopy is widely used for non-invasive imaging of biological structures at subcellular resolution. When applied to complex specimen, its image quality is degraded by sample-induced optical aberration. Adaptive optics can correct wavefront distortion and restore diffraction-limited resolution but require wavefront sensing and corrective devices, increasing system complexity and cost. Here, we describe a self-supervised machine learning algorithm, CoCoA, that performs joint wavefront estimation and three-dimensional structural information extraction from a single input 3D image stack without the need for external training dataset. We implemented CoCoA for widefield imaging of mouse brain tissues and validated its performance with direct-wavefront-sensing-based adaptive optics. Importantly, we systematically explored and quantitatively characterized the limiting factors of CoCoA's performance. Using CoCoA, we demonstrated the first in vivo widefield mouse brain imaging using machine-learning-based adaptive optics. Incorporating coordinate-based neural representations and a forward physics model, the self-supervised scheme of CoCoA should be applicable to microscopy modalities in general.
Read more6/26/2024
0
CodedEvents: Optimal Point-Spread-Function Engineering for 3D-Tracking with Event Cameras
Sachin Shah, Matthew Albert Chan, Haoming Cai, Jingxi Chen, Sakshum Kulshrestha, Chahat Deep Singh, Yiannis Aloimonos, Christopher Metzler
Point-spread-function (PSF) engineering is a well-established computational imaging technique that uses phase masks and other optical elements to embed extra information (e.g., depth) into the images captured by conventional CMOS image sensors. To date, however, PSF-engineering has not been applied to neuromorphic event cameras; a powerful new image sensing technology that responds to changes in the log-intensity of light. This paper establishes theoretical limits (Cram'er Rao bounds) on 3D point localization and tracking with PSF-engineered event cameras. Using these bounds, we first demonstrate that existing Fisher phase masks are already near-optimal for localizing static flashing point sources (e.g., blinking fluorescent molecules). We then demonstrate that existing designs are sub-optimal for tracking moving point sources and proceed to use our theory to design optimal phase masks and binary amplitude masks for this task. To overcome the non-convexity of the design problem, we leverage novel implicit neural representation based parameterizations of the phase and amplitude masks. We demonstrate the efficacy of our designs through extensive simulations. We also validate our method with a simple prototype.
Read more6/14/2024