Distributed Simulation for Digital Twins of Large-Scale Real-World DiffServ-Based Networks

Read original: arXiv:2405.20815 - Published 6/3/2024 by Zhuoyao Huang, Nan Zhang, Jingran Shen, Georgios Diamantopoulos, Zhengchang Hua, Nikos Tziritas, Georgios Theodoropoulos
Total Score

0

Distributed Simulation for Digital Twins of Large-Scale Real-World DiffServ-Based Networks

Sign in to get full access

or

If you already have an account, we'll log you in

Overview

  • This paper presents a distributed simulation framework for creating digital twins of large-scale, real-world networks based on the Differentiated Services (DiffServ) architecture.
  • The framework uses parallel discrete event simulation (PDES) techniques to enable scalable and efficient simulation of complex network dynamics.
  • The authors demonstrate the effectiveness of their approach through experiments on a large-scale DiffServ-based network, showcasing the benefits of their distributed simulation framework.

Plain English Explanation

In this paper, the researchers describe a system for creating digital twins of large-scale computer networks. A digital twin is a virtual model of a real-world system that can be used to simulate and test changes before implementing them in the actual system.

The networks the researchers are modeling use a technology called Differentiated Services (DiffServ), which allows network traffic to be prioritized and managed more efficiently. To create the digital twins, the researchers use a simulation technique called parallel discrete event simulation (PDES). This allows the simulation to be distributed across multiple computers, making it much faster and more scalable than running the simulation on a single machine.

The researchers demonstrate their approach by creating a digital twin of a large, complex real-world network. Their results show that the distributed simulation framework can accurately capture the behavior of the network and run much faster than a traditional single-machine simulation. This allows network operators to experiment with changes and optimizations to the network without disrupting the live system.

Technical Explanation

The paper presents a distributed simulation framework for creating digital twins of large-scale, real-world networks based on the Differentiated Services (DiffServ) architecture. The framework leverages parallel discrete event simulation (PDES) techniques to enable scalable and efficient simulation of complex network dynamics.

The authors adopt the Optimistic Synchronization approach, which allows the simulation components to run concurrently and optimistically process events, rolling back if necessary to maintain consistency. This is implemented using the ROSS (Rensselaer Optimistic Simulation System) framework.

The network model is designed to capture the key aspects of DiffServ, including traffic classification, queuing, and scheduling mechanisms. The simulation is partitioned across multiple logical processes (LPs), each responsible for a portion of the network, which communicate via message passing.

The authors evaluate their framework through experiments on a large-scale DiffServ-based network topology. The results demonstrate the scalability and efficiency of the distributed simulation approach, showing substantial performance improvements over a single-machine simulation.

Critical Analysis

The paper presents a comprehensive and well-designed distributed simulation framework for modeling large-scale DiffServ-based networks. The use of PDES and optimistic synchronization techniques is well-justified and aligns with prior research on efficient digital twin data processing.

However, the paper does not provide a detailed discussion of the limitations or potential issues with the approach. For example, it would be valuable to understand the overhead and tradeoffs associated with the rollback mechanism, as well as the sensitivity of the results to the network topology and workload characteristics.

Additionally, the paper could have benefited from a more thorough comparison to alternative discrete event simulation approaches or other digital twin-driven network architectures. This would help readers understand the unique advantages and disadvantages of the proposed framework.

Conclusion

This paper presents a novel distributed simulation framework for creating digital twins of large-scale, real-world DiffServ-based networks. By leveraging parallel discrete event simulation techniques, the framework enables scalable and efficient modeling of complex network dynamics.

The authors demonstrate the effectiveness of their approach through extensive experiments, showcasing the significant performance improvements over single-machine simulations. This work has important implications for network operators and researchers, who can use the digital twins to experiment with network changes and optimizations without disrupting the live system.

The distributed simulation framework could also be extended to model network diffusion processes or other types of large-scale, interconnected systems. Further research is needed to address the limitations and explore the broader applicability of this approach.



This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!

Follow @aimodelsfyi on 𝕏 →

Related Papers

Distributed Simulation for Digital Twins of Large-Scale Real-World DiffServ-Based Networks
Total Score

0

Distributed Simulation for Digital Twins of Large-Scale Real-World DiffServ-Based Networks

Zhuoyao Huang, Nan Zhang, Jingran Shen, Georgios Diamantopoulos, Zhengchang Hua, Nikos Tziritas, Georgios Theodoropoulos

Digital Twin technology facilitates the monitoring and online analysis of large-scale communication networks. Faster predictions of network performance thus become imperative, especially for analysing Quality of Service (QoS) parameters in large-scale city networks. Discrete Event Simulation (DES) is a standard network analysis technology, and can be further optimised with parallel and distributed execution for speedup, referred to as Parallel Discrete Event Simulation (PDES). However, modelling detailed QoS mechanisms such as DiffServ requires complex event handling for each network router, which can involve excessive simulation events. In addition, current PDES for network analysis mostly adopts conservative scheduling, which suffers from excessive global synchronisation to avoid causality problems. The performance analysis of optimistic PDES for real-world large-scale network topology and complex QoS mechanisms is still inadequate. To address these gaps, this paper proposes a simulation toolkit, Quaint, which leverages an optimistic PDES engine ROSS, for detailed modelling of DiffServ-based networks. A novel event-handling model for each network router is also proposed to significantly reduce the number of events in complex QoS modelling. Quaint has been evaluated using a real-world metropolitan-scale network topology with 5,000 routers/switches. Results show that compared to the conventional simulator OMNeT++/INET, even the sequential mode of Quaint can achieve a speedup of 53 times, and the distributed mode has a speedup of 232 times. Scalability characterisation is conducted to portray the efficiency of distributed execution, and the results indicate the future direction for workload-aware model partitioning.

Read more

6/3/2024

Strongly-Consistent Distributed Discrete-event Systems
Total Score

0

Strongly-Consistent Distributed Discrete-event Systems

Peter Donovan, Erling Jellum, Byeonggil Jun, Hokeun Kim, Edward A. Lee, Shaokai Lin, Marten Lohstroh, Anirudh Rengarajan

Discrete-event (DE) systems are concurrent programs where components communicate via tagged events, where tags are drawn from a totally ordered set. Reactors are an emerging model of computation based on DE and realized in the open-source coordination language Lingua Franca. Distributed DE (DDE) systems are DE systems where the components (reactors) communicate over networks. The prior art has required that for DDE systems with cycles, each cycle must contain at least one logical delay, where the tag of events is incremented. Such delays, however, are not required by the elegant fixed-point semantics of DE. The only requirement is that the program be constructive, meaning it is free of causality cycles. This paper gives a way to coordinate the execution of DDE systems that can execute any constructive program, even one with zero-delay cycles. It provides a formal model that exposes exactly the information that must be shared across networks for such execution to be possible. Furthermore, it describes a concrete implementation that is an extension of the coordination mechanisms in Lingua Franca.

Read more

5/21/2024

📊

Total Score

0

A Centralized Discovery-Based Method for Integrating Data Distribution Service and Time-Sensitive Networking in In-Vehicle Networks

Feng Luo, Yi Ren, Yanhua Yu, Yunpeng Li, Zitong Wang

As the electronic and electrical architecture (E/EA) of intelligent and connected vehicles (ICVs) evolves, traditional distributed and signal-oriented architectures are being replaced by centralized, service-oriented architectures (SOA). This new generation of E/EA demands in-vehicle networks (IVNs) that offer high bandwidth, real-time, reliability, and service-oriented. data distribution service (DDS) and time-sensitive networking (TSN) are increasingly adopted to address these requirements. However, research on the integrated deployment of DDS and TSN in automotive applications is still in its infancy. This paper presents a DDS over TSN (DoT) communication architecture based on the centralized discovery architecture (CDA). First, a lightweight DDS implementation (FastDDS-lw) is developed for resource-constrained in-vehicle devices. Next, a DDS flow identification algorithm (DFIA) based on the CDA is introduced to identify potential DDS flows during the discovery phase automatically. Finally, the DoT communication architecture is designed, incorporating FastDDS-lw and DFIA. Experimental results show that the DoT architecture significantly reduces end-to-end latency and jitter for critical DDS flows compared to traditional Ethernet. Additionally, DoT provides an automated network configuration method that completes within a few tens of milliseconds.

Read more

9/11/2024

Differentiable Discrete Event Simulation for Queuing Network Control
Total Score

0

Differentiable Discrete Event Simulation for Queuing Network Control

Ethan Che, Jing Dong, Hongseok Namkoong

Queuing network control is essential for managing congestion in job-processing systems such as service systems, communication networks, and manufacturing processes. Despite growing interest in applying reinforcement learning (RL) techniques, queueing network control poses distinct challenges, including high stochasticity, large state and action spaces, and lack of stability. To tackle these challenges, we propose a scalable framework for policy optimization based on differentiable discrete event simulation. Our main insight is that by implementing a well-designed smoothing technique for discrete event dynamics, we can compute pathwise policy gradients for large-scale queueing networks using auto-differentiation software (e.g., Tensorflow, PyTorch) and GPU parallelization. Through extensive empirical experiments, we observe that our policy gradient estimators are several orders of magnitude more accurate than typical REINFORCE-based estimators. In addition, We propose a new policy architecture, which drastically improves stability while maintaining the flexibility of neural-network policies. In a wide variety of scheduling and admission control tasks, we demonstrate that training control policies with pathwise gradients leads to a 50-1000x improvement in sample efficiency over state-of-the-art RL methods. Unlike prior tailored approaches to queueing, our methods can flexibly handle realistic scenarios, including systems operating in non-stationary environments and those with non-exponential interarrival/service times.

Read more

9/6/2024