Dynamics of qudit gates and effects of spectator modes on optimal control pulses
0
🖼️
Sign in to get full access
Overview
- This paper focuses on synthesizing high-dimensional quantum computing gates (qudit gates) with high precision using numerical quantum optimal control techniques.
- Large quantum circuits are broken down into smaller modules, and the tailored pulses for each module are used as building blocks for a qudit compiler.
- Applying these pulses in the presence of additional modes (spectator modes) can reduce their effectiveness due to crosstalk.
- The paper addresses this problem by simulating qudit dynamics in circuit quantum electrodynamics (cQED) systems.
Plain English Explanation
One of the key challenges in quantum computing is controlling and manipulating the behavior of quantum systems with high precision. This paper explores a method for synthesizing high-dimensional quantum gates, known as qudit gates, using numerical quantum optimal control techniques.
In this approach, large quantum circuits are broken down into smaller, more manageable modules. The tailored control pulses for each module are then used as building blocks, or "primitives," for a qudit compiler. This allows for the efficient construction of complex quantum circuits.
However, the researchers found that applying these pulses in the presence of additional modes, called "spectator modes," can decrease the effectiveness of the gates due to crosstalk. Crosstalk occurs when the control of one quantum system interferes with the behavior of another nearby system.
To address this issue, the researchers simulated the dynamics of qudit systems in a circuit quantum electrodynamics (cQED) setup. They started with pulses optimized for single-qudit SWAP gates, then applied them in the presence of spectator modes in various Fock states (specific energy levels).
The researchers were able to derive an experimentally relevant scaling formula that can be used as a bound on the fidelity decay, which is a measure of how well the gates are performing. Their results show that the frequency shift from the spectator mode populations must be less than 0.1% of the qudit's nonlinearity (a measure of its quantum properties) in order for the high-fidelity single-qudit gates to be useful in the presence of occupied spectator modes.
Technical Explanation
The paper investigates the synthesis of high-dimensional quantum gates, or qudit gates, using numerical quantum optimal control techniques. The researchers break down large quantum circuits into smaller modules and use the tailored control pulses for each module as primitives in a qudit compiler.
However, when applying these pulses in the presence of extra modes, known as spectator modes, the effectiveness of the gates can be reduced due to crosstalk. To address this, the researchers simulate the qudit dynamics in a circuit quantum electrodynamics (cQED) system.
As a test case, the researchers take pulses for single-qudit SWAP gates that have been optimized in isolation and apply them in the presence of spectator modes in various Fock states. They then provide an experimentally relevant scaling formula that can be used as a bound on the fidelity decay, which is a measure of how well the gates are performing.
The results show that the frequency shift from the spectator mode populations must be less than 0.1% of the qudit's nonlinearity in order for the high-fidelity single-qudit gates to be useful in the presence of occupied spectator modes.
Critical Analysis
The paper presents a valuable approach for synthesizing high-dimensional quantum gates with high precision, as well as insights into the impact of spectator modes on gate performance. The researchers' use of numerical quantum optimal control techniques and the modular approach to building large quantum circuits are promising [https://aimodels.fyi/papers/arxiv/new-optimization-model-multiple-control-toffoli-quantum].
However, the paper does not address the scalability of this approach as the number of qudits and spectator modes increases [https://aimodels.fyi/papers/arxiv/scalable-circuit-cutting-scheduling-resource-constrained-distributed]. Additionally, the paper focuses on single-qudit gates, and it would be interesting to see how the researchers' findings extend to multi-qudit gates [https://aimodels.fyi/papers/arxiv/averting-multi-qubit-burst-errors-surface-code].
Furthermore, the paper does not discuss the practical implementation challenges, such as the hardware requirements and the potential impact of bit-flip errors in the control electronics [https://aimodels.fyi/papers/arxiv/design-execution-quantum-circuits-using-tens-superconducting].
Conclusion
This paper presents a promising approach for synthesizing high-dimensional quantum gates with high precision using numerical quantum optimal control techniques. The researchers' insights into the impact of spectator modes on gate performance are valuable for the development of high-fidelity quantum computing systems.
While the paper focuses on single-qudit gates, the modular approach and the use of tailored control pulses as primitives for a qudit compiler could have broader applications in the field of quantum computing. Further research is needed to address the scalability of this approach and the practical implementation challenges, but this work represents an important step forward in the quest for reliable and efficient quantum computing.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
🖼️
0
Dynamics of qudit gates and effects of spectator modes on optimal control pulses
A. Bar{i}c{s} Ozguler, Joshua A. Job
Qudit gates for high-dimensional quantum computing can be synthesized with high precision using numerical quantum optimal control techniques. Large circuits are broken down into modules and the tailored pulses for each module can be used as primitives for a qudit compiler. Application of the pulses of each module in the presence of extra modes may decrease their effectiveness due to crosstalk. In this paper, we address this problem by simulating qudit dynamics for circuit quantum electrodynamics (cQED) systems. As a test case, we take pulses for single-qudit SWAP gates optimized in isolation and then apply them in the presence of spectator modes each of which are in Fock states. We provide an experimentally relevant scaling formula that can be used as a bound on the fidelity decay. Our results show that frequency shift from spectator mode populations has to be $lesssim 0.1%$ of the qudit's nonlinearity in order for high-fidelity single-qudit gates to be useful in the presence of occupied spectator modes.
Read more5/15/2024
🌿
0
Resource Optimized Quantum Squaring Circuit
Afrin Sultana, Edgard Mu~noz-Coreas
Quantum squaring operation is a useful building block in implementing quantum algorithms such as linear regression, regularized least squares algorithm, order-finding algorithm, quantum search algorithm, Newton Raphson division, Euclidean distance calculation, cryptography, and in finding roots and reciprocals. Quantum circuits could be made fault-tolerant by using error correcting codes and fault-tolerant quantum gates (such as the Clifford + T-gates). However, the T-gate is very costly to implement. Two qubit gates (such as the CNOT-gate) are more prone to noise errors than single qubit gates. Consequently, in order to realize reliable quantum algorithms, the quantum circuits should have a low T-count and CNOT-count. In this paper, we present a novel quantum integer squaring architecture optimized for T-count, CNOT-count, T-depth, CNOT-depth, and $KQ_T$ that produces no garbage outputs. To reduce costs, we use a novel approach for arranging the generated partial products that allows us to reduce the number of adders by 50%. We also use the resource efficient logical-AND gate and uncomputation gate shown in [1] to further save resources. The proposed quantum squaring circuit sees an asymptotic reduction of 66.67% in T-count, 50% in T-depth, 29.41% in CNOT-count, 42.86% in CNOT-depth, and 25% in KQ T with respect to Thapliyal et al. [2]. With respect to Nagamani et al. [3] the design sees an asymptotic reduction of 77.27% in T-count, 68.75% in T-depth, 50% in CNOT-count, 61.90% in CNOT-depth, and 6.25% in the $KQ_T$.
Read more6/5/2024
0
Averting multi-qubit burst errors in surface code magic state factories
Jason D. Chadwick, Christopher Kang, Joshua Viszlai, Sophia Fuhui Lin, Frederic T. Chong
Fault-tolerant quantum computation relies on the assumption of time-invariant, sufficiently low physical error rates. However, current superconducting quantum computers suffer from frequent disruptive noise events, including cosmic ray impacts and shifting two-level system defects. Several methods have been proposed to mitigate these issues in software, but they add large overheads in terms of physical qubit count, as it is difficult to preserve logical information through burst error events. We focus on mitigating multi-qubit burst errors in magic state factories, which are expected to comprise up to 95% of the space cost of future quantum programs. Our key insight is that magic state factories do not need to preserve logical information over time; once we detect an increase in local physical error rates, we can simply turn off parts of the factory that are affected, re-map the factory to the new chip geometry, and continue operating. This is much more efficient than previous more general methods, and is resilient even under many simultaneous impact events. Using precise physical noise models, we show an efficient ray detection method and evaluate our strategy in different noise regimes. Compared to existing baselines, we find reductions in ray-induced overheads by several orders of magnitude, reducing total qubitcycle cost by geomean 6.5x to 13.9x depending on the noise model. This work reduces the burden on hardware by providing low-overhead software mitigation of these errors.
Read more5/2/2024
🔮
0
Extracting Equations of Motion from Superconducting Circuits
Christian Z. Pratt, Kyle J. Ray, James P. Crutchfield
Alternative computing paradigms open the door to exploiting recent innovations in computational hardware to probe the fundamental thermodynamic limits of information processing. One such paradigm employs superconducting quantum interference devices (SQUIDs) to execute classical computations. This, though, requires constructing sufficiently complex superconducting circuits that support a suite of useful information processing tasks and storage operations, as well as understanding these circuits' energetics. First-principle circuit design, though, leads to prohibitive algebraic complications when deriving the effective equations of motion -- complications that to date have precluded achieving these goals, let alone doing so efficiently. We circumvent these complications by (i) specializing our class of circuits and physical operating regimes, (ii) synthesizing existing derivation techniques to suit these specializations, and (iii) implementing solution-finding optimizations which facilitate physically interpreting circuit degrees of freedom that respect physically-grounded constraints. This leads to efficient, practical circuit prototyping and access to scalable circuit architectures. The analytical efficiency is demonstrated by reproducing the potential energy landscape generated by the quantum flux parametron (QFP). We then show how inductively coupling two QFPs produces a device that is capable of executing 2-bit computations via its composite potential energy landscape. More generally, the synthesis methods detailed here provide a basis for constructing universal logic gates and investigating their thermodynamic performance.
Read more7/2/2024