Efficient Transonic Aeroelastic Model Reduction Using Optimized Sparse Multi-Input Polynomial Functionals
0
Sign in to get full access
Overview
- This paper presents an efficient approach for reducing the complexity of aeroelastic models in transonic flow conditions.
- The researchers develop an optimized sparse multi-input polynomial functional (OSMPF) framework to construct reduced-order models (ROMs) from high-fidelity computational fluid dynamics (CFD) simulations.
- The OSMPF method aims to capture the nonlinear aeroelastic behavior accurately while maintaining low computational cost.
Plain English Explanation
The paper describes a way to create simplified mathematical models of a complex aerodynamic system, such as the interaction between an aircraft's wings and the surrounding airflow. These simplified models, called reduced-order models (ROMs), allow engineers to perform calculations and simulations much more quickly than using the full, detailed models.
The researchers developed a specific technique called "optimized sparse multi-input polynomial functionals" (OSMPF) to build these ROMs. The key idea is to represent the complex nonlinear aerodynamic behavior using a mathematical function with multiple inputs, where the function is optimized to be as simple (sparse) as possible while still accurately capturing the important aspects of the system.
By using this OSMPF approach, the researchers were able to create ROMs that closely match the behavior of the full, high-fidelity CFD simulations, but at a fraction of the computational cost. This could enable faster design and analysis of aircraft and other aerodynamic systems.
Technical Explanation
The paper presents an efficient method for model order reduction of aeroelastic systems in transonic flow conditions. The researchers develop an optimized sparse multi-input polynomial functional (OSMPF) framework to construct reduced-order models (ROMs) from high-fidelity computational fluid dynamics (CFD) simulations.
The OSMPF method aims to capture the nonlinear aeroelastic behavior accurately while maintaining low computational cost. It involves:
- Identifying a set of relevant state variables (e.g., wing displacement, angle of attack) from the high-fidelity CFD simulations.
- Constructing a polynomial function with these state variables as inputs, where the coefficients of the polynomial are optimized to best fit the CFD data.
- Applying sparsity-promoting optimization techniques to obtain a simplified, sparse polynomial functional that still accurately represents the nonlinear aeroelastic dynamics.
The resulting OSMPF-based ROMs are shown to provide a good balance between model accuracy and computational efficiency, enabling rapid exploration of the aeroelastic design space compared to the full-order CFD models.
Critical Analysis
The paper presents a promising approach for efficient model order reduction of aeroelastic systems, but it does not address several important considerations:
- The method is demonstrated only for a 2D airfoil case, and the authors acknowledge that extending it to 3D wing configurations may introduce additional challenges.
- The optimality and stability of the OSMPF-based ROMs are not thoroughly investigated, especially for long-term simulations or under extreme operating conditions.
- The paper does not compare the OSMPF approach to other popular model reduction techniques, such as proper orthogonal decomposition or machine learning-based methods, which could provide useful insights.
Further research is needed to address these limitations and establish the broader applicability and reliability of the OSMPF framework for aeroelastic modeling and design.
Conclusion
This paper presents an efficient approach for reduced-order modeling of aeroelastic systems in transonic flow conditions. The developed OSMPF framework aims to capture the nonlinear aerodynamic behavior accurately while maintaining low computational cost, enabling faster design and analysis of aircraft and other aerodynamic systems. While the method shows promise, further research is needed to address its limitations and establish its broader applicability in the field of computational aeroelasticity.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
0
Efficient Transonic Aeroelastic Model Reduction Using Optimized Sparse Multi-Input Polynomial Functionals
Michael Candon, Maciej Balajewicz, Arturo Delgado-Gutierrez, Pier Marzocca, Earl H. Dowell
Nonlinear aeroelastic reduced-order models (ROMs) based on machine learning or artificial intelligence algorithms can be complex and computationally demanding to train, meaning that for practical aeroelastic applications, the conservative nature of linearization is often favored. Therefore, there is a requirement for novel nonlinear aeroelastic model reduction approaches that are accurate, simple and, most importantly, efficient to generate. This paper proposes a novel formulation for the identification of a compact multi-input Volterra series, where Orthogonal Matching Pursuit is used to obtain a set of optimally sparse nonlinear multi-input ROM coefficients from unsteady aerodynamic training data. The framework is exemplified using the Benchmark Supercritical Wing, considering; forced response, flutter and limit cycle oscillation. The simple and efficient Optimal Sparsity Multi-Input ROM (OSM-ROM) framework performs with high accuracy compared to the full-order aeroelastic model, requiring only a fraction of the tens-of-thousands of possible multi-input terms to be identified and allowing a 96% reduction in the number of training samples.
Read more9/2/2024
0
Scientific Machine Learning Based Reduced-Order Models for Plasma Turbulence Simulations
Constantin Gahr, Ionut-Gabriel Farcas, Frank Jenko
This paper focuses on the construction of non-intrusive Scientific Machine Learning (SciML) Reduced-Order Models (ROMs) for plasma turbulence simulations. In particular, we propose using Operator Inference (OpInf) to build low-cost physics-based ROMs from data for such simulations. As a representative example, we focus on the Hasegawa-Wakatani (HW) equations used for modeling two-dimensional electrostatic drift-wave turbulence. For a comprehensive perspective of the potential of OpInf to construct accurate ROMs, we consider three setups for the HW equations by varying a key model parameter, namely the adiabaticity coefficient. These setups lead to the formation of complex and nonlinear dynamics, which makes the construction of accurate ROMs of any kind challenging. We generate the training datasets by performing direct numerical simulations of the HW equations and recording the computed state data and outputs the over a time horizon of 100 time units in the turbulent phase. We then use these datasets to construct OpInf ROMs for predictions over 400 additional time units. Our results show that the OpInf ROMs capture the important features of the turbulent dynamics and generalize beyond the training time horizon while reducing the computational effort of the high-fidelity simulation by up to five orders of magnitude. In the broader context of fusion research, this shows that non-intrusive SciML ROMs have the potential to drastically accelerate numerical studies, which can ultimately enable tasks such as the design of optimized fusion devices.
Read more6/27/2024
🧠
0
A hybrid numerical methodology coupling Reduced Order Modeling and Graph Neural Networks for non-parametric geometries: applications to structural dynamics problems
Victor Matray (LMPS), Faisal Amlani (LMPS), Fr'ed'eric Feyel (LMPS), David N'eron (LMPS)
This work introduces a new approach for accelerating the numerical analysis of time-domain partial differential equations (PDEs) governing complex physical systems. The methodology is based on a combination of a classical reduced-order modeling (ROM) framework and recently-introduced Graph Neural Networks (GNNs), where the latter is trained on highly heterogeneous databases of varying numerical discretization sizes. The proposed techniques are shown to be particularly suitable for non-parametric geometries, ultimately enabling the treatment of a diverse range of geometries and topologies. Performance studies are presented in an application context related to the design of aircraft seats and their corresponding mechanical responses to shocks, where the main motivation is to reduce the computational burden and enable the rapid design iteration for such problems that entail non-parametric geometries. The methods proposed here are straightforwardly applicable to other scientific or engineering problems requiring a large number of finite element-based numerical simulations, with the potential to significantly enhance efficiency while maintaining reasonable accuracy.
Read more6/6/2024
0
Real-time optimal control of high-dimensional parametrized systems by deep learning-based reduced order models
Matteo Tomasetto, Andrea Manzoni, Francesco Braghin
Steering a system towards a desired target in a very short amount of time is challenging from a computational standpoint. Indeed, the intrinsically iterative nature of optimal control problems requires multiple simulations of the physical system to be controlled. Moreover, the control action needs to be updated whenever the underlying scenario undergoes variations. Full-order models based on, e.g., the Finite Element Method, do not meet these requirements due to the computational burden they usually entail. On the other hand, conventional reduced order modeling techniques such as the Reduced Basis method, are intrusive, rely on a linear superimposition of modes, and lack of efficiency when addressing nonlinear time-dependent dynamics. In this work, we propose a non-intrusive Deep Learning-based Reduced Order Modeling (DL-ROM) technique for the rapid control of systems described in terms of parametrized PDEs in multiple scenarios. In particular, optimal full-order snapshots are generated and properly reduced by either Proper Orthogonal Decomposition or deep autoencoders (or a combination thereof) while feedforward neural networks are exploited to learn the map from scenario parameters to reduced optimal solutions. Nonlinear dimensionality reduction therefore allows us to consider state variables and control actions that are both low-dimensional and distributed. After (i) data generation, (ii) dimensionality reduction, and (iii) neural networks training in the offline phase, optimal control strategies can be rapidly retrieved in an online phase for any scenario of interest. The computational speedup and the high accuracy obtained with the proposed approach are assessed on different PDE-constrained optimization problems, ranging from the minimization of energy dissipation in incompressible flows modelled through Navier-Stokes equations to the thermal active cooling in heat transfer.
Read more9/10/2024