An EM Body Model for Device-Free Localization with Multiple Antenna Receivers: A First Study
2405.09558
0
0
Abstract
Device-Free Localization (DFL) employs passive radio techniques capable to detect and locate people without imposing them to wear any electronic device. By exploiting the Integrated Sensing and Communication paradigm, DFL networks employ Radio Frequency (RF) nodes to measure the excess attenuation introduced by the subjects (i.e., human bodies) moving inside the monitored area, and to estimate their positions and movements. Physical, statistical, and ElectroMagnetic (EM) models have been proposed in the literature to estimate the body positions according to the RF signals collected by the nodes. These body models usually employ a single-antenna processing for localization purposes. However, the availability of low-cost multi-antenna devices such as those used for WLAN (Wireless Local Area Network) applications and the timely development of array-based body models, allow us to employ array-based processing techniques in DFL networks. By exploiting a suitable array-capable EM body model, this paper proposes an array-based framework to improve people sensing and localization. In particular, some simulations are proposed and discussed to compare the model results in both single- and multi-antenna scenarios. The proposed framework paves the way for a wider use of multi-antenna devices (e.g., those employed in current IEEE 802.11ac/ax/be and forthcoming IEEE 802.11be networks) and novel beamforming algorithms for DFL scenarios.
Create account to get full access
Overview
- This paper presents an electromagnetic (EM) body model for device-free passive radio localization using multiple antenna receivers.
- The research is funded by the European Union and explores the integration of sensing and communication technologies.
- The paper investigates the use of array processing techniques for device-free localization.
Plain English Explanation
The paper describes a new way to track the location of people in a room without them carrying any special devices. Instead, the system uses the way the human body interacts with wireless signals to determine where someone is.
By setting up multiple antennas around a room, the researchers can analyze how the wireless signals change as a person moves around. This allows them to pinpoint the person's location without the person needing to wear a tracker or carry a smartphone.
The key innovation is the use of an electromagnetic body model, which simulates how the human body affects wireless signals. This model helps the system interpret the changes in the wireless signals and translate them into an accurate position for the person.
This technology could be useful for various applications, such as smart homes, security systems, or wireless health monitoring. By detecting people's locations without requiring them to carry any devices, it opens up new possibilities for integrated sensing and communication.
Technical Explanation
The paper presents an electromagnetic (EM) body model to enable device-free passive radio localization using multiple antenna receivers. The researchers develop a simulation model that can accurately represent how the human body interacts with wireless signals, including the effects of the body's shape, size, and composition on the propagation of radio waves.
By incorporating this EM body model into their localization system, the researchers can better interpret the changes in wireless signals as a person moves around a room. The multiple antennas placed in the environment allow the system to triangulate the person's position based on the unique signal patterns created by the person's body.
The paper explores the use of array processing techniques, such as beamforming and direction-of-arrival estimation, to enhance the localization accuracy. These methods leverage the spatial diversity of the multiple antennas to improve the system's ability to detect and track the person's movements.
Overall, this research represents an important step towards enabling device-free localization and the integration of sensing and communication technologies for various applications.
Critical Analysis
The paper provides a solid foundation for using EM body models to enable device-free localization, but there are a few areas that could be explored further:
-
The evaluation of the EM body model's accuracy and its sensitivity to different body types or poses could be expanded. This would help understand the limitations and potential biases of the model.
-
The integration of the EM body model with the array processing techniques could be examined in more depth, including the impact of factors like antenna placement and number on the overall localization performance.
-
The paper focuses on a single-person scenario, but extending the approach to handle multiple people simultaneously would be an important next step for real-world applications.
-
The paper does not discuss the computational complexity or resource requirements of the proposed system, which could be important considerations for practical deployments, especially in resource-constrained environments.
Overall, this research represents a promising step forward in the field of device-free localization and the integration of sensing and communication technologies. The EM body model approach has the potential to unlock new possibilities for smart home, security, and wireless health monitoring applications.
Conclusion
This paper presents an innovative approach to device-free passive radio localization using an electromagnetic (EM) body model and multiple antenna receivers. The EM body model allows the system to accurately track a person's movements by analyzing the changes in wireless signals caused by the person's body.
The integration of sensing and communication technologies demonstrated in this research opens up new possibilities for smart home, security, and wireless health monitoring applications, where detecting people's locations without the need for specialized devices can provide valuable insights and enable new functionalities.
As the research continues, further exploration of the EM body model's accuracy, the integration with array processing techniques, and the ability to handle multiple people simultaneously will be important to fully realize the potential of this approach for device-free localization and integrated sensing and communication.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
An Initial Study of Human-Scale Blockage in sub-THz Radio Propagation with Application to Indoor Passive Localization
F. Paonessa, G. Virone, S. Kianoush, A. Nordio, S. Savazzi
0
0
This paper empirically investigates the body induced electromagnetic (EM) effects, namely the human body blockage, by conducting indoor measurement campaigns in the unexplored sub-THz W-band (75-110 GHz) and G-band (170-260 GHz). The proposed analysis focuses on both the alterations of channel frequency response induced by body presence, fully or partially obstructing the line-of-sight (LoS) between transmitter and recevier, as well as on the channel impulse response (CIR) for selected movements of the target, i.e. crossing the LoS of the radio link. Modelling of large scale parameters is also presented using a phantom body object. The proposed study has applications in device-free radio localization and radio frequency (RF) sensing scenarios where the EM radiation or environmental radio signals are collected and processed to detect and locate people without requiring them to wear any electronic devices. Although preliminary, the study reveals that discrimination of the blockage micro-movements is possible, achieving higher precision compared to classical RF sensing and localization using cm-scale wavelengths (2.4-6GHz bands).
6/26/2024
Meta Distribution of Passive Electromagnetic Field Exposure in Cellular Networks
Quentin Gontier, Charles Wiame, Franc{c}ois Horlin, Christo Tsigros, Claude Oestges, Philippe De Doncker
0
0
This paper focuses on the meta distribution of electromagnetic field exposure (EMFE) experienced by a passive user in a cellular network implementing dynamic beamforming. The meta distribution serves as a valuable tool for extracting fine-grained insights into statistics of individual passive user EMFE across the network. A comprehensive stochastic geometry framework is established for this analysis. Given the pivotal role of accurately modeling the main and side lobes of antennas in this context, a multi-cosine gain model is introduced. The meta distribution is closely approximated by a beta distribution derived from its first- and second-order moments, which is demonstrated to be mathematically tractable. The impact of the number of antennas in the ULA on the meta distribution is explored, shedding light on its sensitivity to this parameter.
4/22/2024
📊
Multi-Stage Fusion Architecture for Small-Drone Localization and Identification Using Passive RF and EO Imagery: A Case Study
Thakshila Wimalajeewa Wewelwala, Thomas W. Tedesso, Tony Davis
0
0
Reliable detection, localization and identification of small drones is essential to promote safe, secure and privacy-respecting operation of Unmanned-Aerial Systems (UAS), or simply, drones. This is an increasingly challenging problem with only single modality sensing, especially, to detect and identify small drones. In this work, a multi-stage fusion architecture using passive radio frequency (RF) and electro-optic (EO) imagery data is developed to leverage the synergies of the modalities to improve the overall tracking and classification capabilities. For detection with EO-imagery, supervised deep learning based techniques as well as unsupervised foreground/background separation techniques are explored to cope with challenging environments. Using real collected data for Group 1 and 2 drones, the capability of each algorithm is quantified. In order to compensate for any performance gaps in detection with only EO imagery as well as to provide a unique device identifier for the drones, passive RF is integrated with EO imagery whenever available. In particular, drone detections in the image plane are combined with passive RF location estimates via detection-to-detection association after 3D to 2D transformation. Final tracking is performed on the composite detections in the 2D image plane. Each track centroid is given a unique identification obtained via RF fingerprinting. The proposed fusion architecture is tested and the tracking and performance is quantified over the range to illustrate the effectiveness of the proposed approaches using simultaneously collected passive RF and EO data at the Air Force Research Laboratory (AFRL) through ESCAPE-21 (Experiments, Scenarios, Concept of Operations, and Prototype Engineering) data collect
6/26/2024
🤿
Digital Over-the-Air Federated Learning in Multi-Antenna Systems
Sihua Wang, Mingzhe Chen, Cong Shen, Changchuan Yin, Christopher G. Brinton
0
0
In this paper, the performance optimization of federated learning (FL), when deployed over a realistic wireless multiple-input multiple-output (MIMO) communication system with digital modulation and over-the-air computation (AirComp) is studied. In particular, a MIMO system is considered in which edge devices transmit their local FL models (trained using their locally collected data) to a parameter server (PS) using beamforming to maximize the number of devices scheduled for transmission. The PS, acting as a central controller, generates a global FL model using the received local FL models and broadcasts it back to all devices. Due to the limited bandwidth in a wireless network, AirComp is adopted to enable efficient wireless data aggregation. However, fading of wireless channels can produce aggregate distortions in an AirComp-based FL scheme. To tackle this challenge, we propose a modified federated averaging (FedAvg) algorithm that combines digital modulation with AirComp to mitigate wireless fading while ensuring the communication efficiency. This is achieved by a joint transmit and receive beamforming design, which is formulated as an optimization problem to dynamically adjust the beamforming matrices based on current FL model parameters so as to minimize the transmitting error and ensure the FL performance. To achieve this goal, we first analytically characterize how the beamforming matrices affect the performance of the FedAvg in different iterations. Based on this relationship, an artificial neural network (ANN) is used to estimate the local FL models of all devices and adjust the beamforming matrices at the PS for future model transmission. The algorithmic advantages and improved performance of the proposed methodologies are demonstrated through extensive numerical experiments.
4/26/2024