Intelligent Anomaly Detection for Lane Rendering Using Transformer with Self-Supervised Pre-Training and Customized Fine-Tuning
2312.04398
0
0
❗
Abstract
The burgeoning navigation services using digital maps provide great convenience to drivers. Nevertheless, the presence of anomalies in lane rendering map images occasionally introduces potential hazards, as such anomalies can be misleading to human drivers and consequently contribute to unsafe driving conditions. In response to this concern and to accurately and effectively detect the anomalies, this paper transforms lane rendering image anomaly detection into a classification problem and proposes a four-phase pipeline consisting of data pre-processing, self-supervised pre-training with the masked image modeling (MiM) method, customized fine-tuning using cross-entropy based loss with label smoothing, and post-processing to tackle it leveraging state-of-the-art deep learning techniques, especially those involving Transformer models. Various experiments verify the effectiveness of the proposed pipeline. Results indicate that the proposed pipeline exhibits superior performance in lane rendering image anomaly detection, and notably, the self-supervised pre-training with MiM can greatly enhance the detection accuracy while significantly reducing the total training time. For instance, employing the Swin Transformer with Uniform Masking as self-supervised pretraining (Swin-Trans-UM) yielded a heightened accuracy at 94.77% and an improved Area Under The Curve (AUC) score of 0.9743 compared with the pure Swin Transformer without pre-training (Swin-Trans) with an accuracy of 94.01% and an AUC of 0.9498. The fine-tuning epochs were dramatically reduced to 41 from the original 280. In conclusion, the proposed pipeline, with its incorporation of self-supervised pre-training using MiM and other advanced deep learning techniques, emerges as a robust solution for enhancing the accuracy and efficiency of lane rendering image anomaly detection in digital navigation systems.
Create account to get full access
Overview
- Digital navigation services using maps provide convenience to drivers, but can sometimes introduce potential hazards due to anomalies in lane rendering.
- This paper proposes a four-phase pipeline to accurately and effectively detect these lane rendering image anomalies using state-of-the-art deep learning techniques, especially Transformer models.
- The key elements of the pipeline include data pre-processing, self-supervised pre-training with the Masked Image Modeling (MiM) method, customized fine-tuning, and post-processing.
Plain English Explanation
Digital maps and navigation services have made it much easier for drivers to get around. However, sometimes the maps can have issues, like problems with the way the lane markings are shown. These anomalies in the lane rendering can be misleading and potentially lead to unsafe driving conditions.
To address this, the researchers in this paper developed a multi-step process to accurately detect these lane rendering anomalies. First, they prepare the data by preprocessing it. Then, they use a technique called self-supervised pre-training with Masked Image Modeling (MiM) to help the AI system learn important features without needing a lot of labeled training data.
Next, they fine-tune the system further using a customized training approach that helps it better identify the anomalies. Finally, they do some post-processing to refine the results.
By using advanced deep learning methods, especially Transformer models, the researchers were able to create a robust pipeline that can accurately detect lane rendering issues in digital maps. This is important for improving the safety and reliability of navigation services.
Technical Explanation
The researchers transformed the problem of detecting lane rendering image anomalies into a classification task. They proposed a four-phase pipeline to address this:
-
Data Pre-processing: The researchers prepared the lane rendering image data for use in the deep learning models.
-
Self-Supervised Pre-Training with Masked Image Modeling (MiM): To help the models learn useful features without needing a lot of labeled training data, the researchers employed a self-supervised pre-training approach using the MiM technique. This involves training the models to predict masked-out portions of the input images.
-
Customized Fine-Tuning: After pre-training, the researchers fine-tuned the models further using a customized training approach with a cross-entropy based loss function and label smoothing.
-
Post-Processing: Finally, the researchers applied post-processing steps to refine the anomaly detection results.
The researchers experimented with different Transformer models, including the Swin Transformer, and found that the self-supervised pre-training with MiM greatly enhanced the detection accuracy while significantly reducing the total training time. For instance, the Swin Transformer with Uniform Masking as the self-supervised pre-training (Swin-Trans-UM) achieved an accuracy of 94.77% and an Area Under the Curve (AUC) score of 0.9743, compared to the pure Swin Transformer without pre-training (Swin-Trans) which had an accuracy of 94.01% and an AUC of 0.9498. Additionally, the fine-tuning epochs were reduced from 280 to just 41.
Critical Analysis
The researchers have presented a comprehensive and well-designed approach to addressing the challenge of detecting lane rendering anomalies in digital maps. The use of self-supervised pre-training with MiM is particularly noteworthy, as it helps the models learn useful features without requiring large amounts of labeled data, which can be a significant bottleneck in many computer vision tasks.
However, the paper does not discuss the potential limitations or caveats of the proposed pipeline. For example, it would be interesting to understand how the pipeline might perform on more diverse or challenging datasets, or how it might handle edge cases or rare anomalies. Additionally, the researchers could have explored the interpretability and explainability of the Transformer models used, as this is an important consideration for real-world deployment of such systems.
Nevertheless, the strong performance results and the efficient training process demonstrated in the paper suggest that this pipeline could be a valuable tool for improving the safety and reliability of digital navigation services. As the researchers note, further research and development in this area could have significant implications for the field and for society at large.
Conclusion
This paper presents a robust and efficient pipeline for detecting anomalies in lane rendering images used in digital navigation services. By leveraging state-of-the-art deep learning techniques, especially Transformer models and self-supervised pre-training with Masked Image Modeling, the researchers were able to achieve high accuracy and significantly reduce the training time required. This work has the potential to enhance the safety and reliability of digital navigation systems, which is increasingly important as these services become more widespread and integral to our daily lives.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
🔎
LaneCorrect: Self-supervised Lane Detection
Ming Nie, Xinyue Cai, Hang Xu, Li Zhang
0
0
Lane detection has evolved highly functional autonomous driving system to understand driving scenes even under complex environments. In this paper, we work towards developing a generalized computer vision system able to detect lanes without using any annotation. We make the following contributions: (i) We illustrate how to perform unsupervised 3D lane segmentation by leveraging the distinctive intensity of lanes on the LiDAR point cloud frames, and then obtain the noisy lane labels in the 2D plane by projecting the 3D points; (ii) We propose a novel self-supervised training scheme, dubbed LaneCorrect, that automatically corrects the lane label by learning geometric consistency and instance awareness from the adversarial augmentations; (iii) With the self-supervised pre-trained model, we distill to train a student network for arbitrary target lane (e.g., TuSimple) detection without any human labels; (iv) We thoroughly evaluate our self-supervised method on four major lane detection benchmarks (including TuSimple, CULane, CurveLanes and LLAMAS) and demonstrate excellent performance compared with existing supervised counterpart, whilst showing more effective results on alleviating the domain gap, i.e., training on CULane and test on TuSimple.
4/24/2024
Liveness Detection in Computer Vision: Transformer-based Self-Supervised Learning for Face Anti-Spoofing
Arman Keresh, Pakizar Shamoi
0
0
Face recognition systems are increasingly used in biometric security for convenience and effectiveness. However, they remain vulnerable to spoofing attacks, where attackers use photos, videos, or masks to impersonate legitimate users. This research addresses these vulnerabilities by exploring the Vision Transformer (ViT) architecture, fine-tuned with the DINO framework. The DINO framework facilitates self-supervised learning, enabling the model to learn distinguishing features from unlabeled data. We compared the performance of the proposed fine-tuned ViT model using the DINO framework against a traditional CNN model, EfficientNet b2, on the face anti-spoofing task. Numerous tests on standard datasets show that the ViT model performs better than the CNN model in terms of accuracy and resistance to different spoofing methods. Additionally, we collected our own dataset from a biometric application to validate our findings further. This study highlights the superior performance of transformer-based architecture in identifying complex spoofing cues, leading to significant advancements in biometric security.
6/21/2024
Exploring Self-Supervised Vision Transformers for Deepfake Detection: A Comparative Analysis
Huy H. Nguyen, Junichi Yamagishi, Isao Echizen
0
0
This paper investigates the effectiveness of self-supervised pre-trained transformers compared to supervised pre-trained transformers and conventional neural networks (ConvNets) for detecting various types of deepfakes. We focus on their potential for improved generalization, particularly when training data is limited. Despite the notable success of large vision-language models utilizing transformer architectures in various tasks, including zero-shot and few-shot learning, the deepfake detection community has still shown some reluctance to adopt pre-trained vision transformers (ViTs), especially large ones, as feature extractors. One concern is their perceived excessive capacity, which often demands extensive data, and the resulting suboptimal generalization when training or fine-tuning data is small or less diverse. This contrasts poorly with ConvNets, which have already established themselves as robust feature extractors. Additionally, training and optimizing transformers from scratch requires significant computational resources, making this accessible primarily to large companies and hindering broader investigation within the academic community. Recent advancements in using self-supervised learning (SSL) in transformers, such as DINO and its derivatives, have showcased significant adaptability across diverse vision tasks and possess explicit semantic segmentation capabilities. By leveraging DINO for deepfake detection with modest training data and implementing partial fine-tuning, we observe comparable adaptability to the task and the natural explainability of the detection result via the attention mechanism. Moreover, partial fine-tuning of transformers for deepfake detection offers a more resource-efficient alternative, requiring significantly fewer computational resources.
5/2/2024
❗
Efficient Anomaly Detection with Budget Annotation Using Semi-Supervised Residual Transformer
Hanxi Li, Jingqi Wu, Hao Chen, Mingwen Wang, Chunhua Shen
0
0
Anomaly Detection is challenging as usually only the normal samples are seen during training and the detector needs to discover anomalies on-the-fly. The recently proposed deep-learning-based approaches could somehow alleviate the problem but there is still a long way to go in obtaining an industrial-class anomaly detector for real-world applications. On the other hand, in some particular AD tasks, a few anomalous samples are labeled manually for achieving higher accuracy. However, this performance gain is at the cost of considerable annotation efforts, which can be intractable in many practical scenarios. In this work, the above two problems are addressed in a unified framework. Firstly, inspired by the success of the patch-matching-based AD algorithms, we train a sliding vision transformer over the residuals generated by a novel position-constrained patch-matching. Secondly, the conventional pixel-wise segmentation problem is cast into a block-wise classification problem. Thus the sliding transformer can attain even higher accuracy with much less annotation labor. Thirdly, to further reduce the labeling cost, we propose to label the anomalous regions using only bounding boxes. The unlabeled regions caused by the weak labels are effectively exploited using a highly-customized semi-supervised learning scheme equipped with two novel data augmentation methods. The proposed method outperforms all the state-of-the-art approaches using all the evaluation metrics in both the unsupervised and supervised scenarios. On the popular MVTec-AD dataset, our SemiREST algorithm obtains the Average Precision (AP) of 81.2% in the unsupervised condition and 84.4% AP for supervised anomaly detection. Surprisingly, with the bounding-box-based semi-supervisions, SemiREST still outperforms the SOTA methods with full supervision (83.8% AP) on MVTec-AD.
5/29/2024