Modeling and Controls of Fluid-Structure Interactions (FSI) in Dynamic Morphing Flight
0
Sign in to get full access
Overview
- This paper explores the modeling and control of fluid-structure interactions (FSI) in dynamic morphing flight.
- It presents a constrained model hardware setup to study these complex aerodynamic phenomena.
- The research aims to advance the understanding and control of morphing aircraft that can adapt their shape and structure during flight.
Plain English Explanation
The paper focuses on understanding and controlling the complex interactions between the airflow around a flying object and the structure of the object itself. This is important for designing aircraft that can change their shape and structure during flight, known as "morphing" aircraft.
The researchers have built a special hardware setup to study these fluid-structure interactions in a controlled environment. By carefully measuring and analyzing the forces and movements involved, they hope to develop better models and control algorithms for morphing aircraft.
Morphing aircraft have the potential to be more agile and efficient than traditional fixed-wing designs, as they can adapt their shape to different flight conditions. However, the interactions between the air and the changing structure are challenging to predict and control. This research aims to provide the fundamental understanding and tools needed to make morphing aircraft a practical reality.
Technical Explanation
The paper presents a constrained model hardware setup to study the fluid-structure interactions (FSI) in dynamic morphing flight. The setup includes a wind tunnel and a morphing wing structure that can be precisely controlled and measured.
The researchers use this hardware to investigate the complex aerodynamic phenomena that arise when an aircraft's shape and structure change during flight. They collect detailed data on the forces, pressures, and deformations involved, which is used to develop improved modeling and control algorithms for morphing aircraft.
Key aspects of the technical approach include:
- Designing a morphing wing structure with multiple degrees of freedom to enable complex shape changes
- Integrating sensors to measure the forces, pressures, and deformations during experiments
- Developing computational fluid dynamics (CFD) models to simulate the FSI effects
- Testing different control strategies to effectively maneuver the morphing aircraft
Critical Analysis
The paper provides a thorough and well-designed experimental setup to study the challenging problem of fluid-structure interactions in morphing aircraft. The authors have carefully considered the relevant physical phenomena and built a system that can accurately measure and analyze the complex dynamics involved.
However, the research is still limited to a constrained model in a wind tunnel environment. Translating these findings to full-scale, free-flight morphing aircraft will likely require additional work to address factors like structural integrity, weight, and control system integration.
The authors acknowledge some of these limitations and suggest areas for further research, such as incorporating more advanced sensing and control techniques and exploring the effects of nonlinearities and higher-order dynamics.
Overall, this research represents an important step towards enabling the practical application of morphing aircraft technology, which could lead to more agile and efficient aerial vehicles in the future.
Conclusion
This paper presents a detailed study of the fluid-structure interactions involved in dynamic morphing flight. By building a specialized constrained model hardware setup, the researchers are able to collect valuable data and develop improved modeling and control approaches for morphing aircraft.
The findings from this work contribute to the fundamental understanding of how an aircraft's changing shape and structure interact with the surrounding airflow. This knowledge is critical for realizing the potential benefits of morphing aircraft, which could include enhanced maneuverability, efficiency, and versatility compared to traditional fixed-wing designs.
While there are still challenges to overcome before morphing aircraft become a practical reality, this research represents an important step forward. By continuing to advance the modeling and control of fluid-structure interactions, the authors and others in the field are paving the way for a new generation of highly adaptable and capable aerial vehicles.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
0
Modeling and Controls of Fluid-Structure Interactions (FSI) in Dynamic Morphing Flight
Bibek Gupta, Eric Sihite, Alireza Ramezani
The primary aim of this study is to enhance the accuracy of our aerodynamic Fluid-Structure Interaction (FSI) model to support the controlled tracking of 3D flight trajectories by Aerobat, which is a dynamic morphing winged drone. Building upon our previously documented Unsteady Aerodynamic model rooted in horseshoe vortices, we introduce a new iteration of Aerobat, labeled as version beta, which is designed for attachment to a Kinova arm. Through a series of experiments, we gather force-moment data from the robotic arm attachment and utilize it to fine-tune our unsteady model for banking turn maneuvers. Subsequently, we employ the tuned FSI model alongside a collocation control strategy to accomplish 3D banking turns of Aerobat within simulation environments. The primary contribution lies in presenting a methodical approach to calibrate our FSI model to predict complex 3D maneuvers and successfully assessing the model's potential for closed-loop flight control of Aerobat using an optimization-based collocation method.
Read more6/21/2024
🛠️
0
Banking Turn of High-DOF Dynamic Morphing Wing Flight by Shifting Structure Response Using Optimization
Bibek Gupta, Yogi Shah, Taoran Liu, Eric Sihite, Alireza Ramezani
The 3D flight control of a flapping wing robot is a very challenging problem. The robot stabilizes and controls its pose through the aerodynamic forces acting on the wing membrane which has complex dynamics and it is difficult to develop a control method to interact with such a complex system. Bats, in particular, are capable of performing highly agile aerial maneuvers such as tight banking and bounding flight solely using their highly flexible wings. In this work, we develop a control method for a bio-inspired bat robot, the Aerobat, using small low-powered actuators to manipulate the flapping gait and the resulting aerodynamic forces. We implemented a controller based on collocation approach to track a desired roll and perform a banking maneuver to be used in a trajectory tracking controller. This controller is implemented in a simulation to show its performance and feasibility.
Read more5/10/2024
0
Modeling and LQR Control of Insect Sized Flapping Wing Robot
Daksh Dhingra, Kadierdan Kaheman, Sawyer B. Fuller
Flying insects can perform rapid, sophisticated maneuvers like backflips, sharp banked turns, and in-flight collision recovery. To emulate these in aerial robots weighing less than a gram, known as flying insect robots (FIRs), a fast and responsive control system is essential. To date, these have largely been, at their core, elaborations of proportional-integral-derivative (PID)-type feedback control. Without exception, their gains have been painstakingly tuned by hand. Aggressive maneuvers have further required task-specific tuning. Optimal control has the potential to mitigate these issues, but has to date only been demonstrated using approxiate models and receding horizon controllers (RHC) that are too computationally demanding to be carried out onboard the robot. Here we used a more accurate stroke-averaged model of forces and torques to implement the first demonstration of optimal control on an FIR that is computationally efficient enough to be performed by a microprocessor carried onboard. We took force and torque measurements from a 150 mg FIR, the UW Robofly, using a custom-built sensitive force-torque sensor, and validated them using motion capture data in free flight. We demonstrated stable hovering (RMS error of about 4 cm) and trajectory tracking maneuvers at translational velocities up to 25 cm/s using an optimal linear quadratic regulator (LQR). These results were enabled by a more accurate model and lay the foundation for future work that uses our improved model and optimal controller in conjunction with recent advances in low-power receding horizon control to perform accurate aggressive maneuvers without iterative, task-specific tuning.
Read more7/1/2024
0
Deep Learning Models for Flapping Fin Unmanned Underwater Vehicle Control System Gait Optimization
Brian Zhou, Kamal Viswanath, Jason Geder, Alisha Sharma, Julian Lee
The last few decades have led to the rise of research focused on propulsion and control systems for bio-inspired unmanned underwater vehicles (UUVs), which provide more maneuverable alternatives to traditional UUVs in underwater missions. Recent work has explored the use of time-series neural network surrogate models to predict thrust and power from vehicle design and fin kinematics. We develop a search-based inverse model that leverages kinematics-to-thrust and kinematics-to-power neural network models for control system design. Our inverse model finds a set of fin kinematics with the multi-objective goal of reaching a target thrust under power constraints while creating a smooth kinematics transition between flapping cycles. We demonstrate how a control system integrating this inverse model can make online, cycle-to-cycle adjustments to prioritize different system objectives, with improvements in increasing thrust generation or reducing power consumption of any given movement upwards of 0.5 N and 3.0 W in a range of 2.2 N and 9.0 W. As propulsive efficiency is of utmost importance for flapping-fin UUVs in order to extend their range and endurance for essential operations but lacks prior research, we develop a non-dimensional figure of merit (FOM), derived from measures of propulsive efficiency, that is able to evaluate different fin designs and kinematics, and allow for comparison with other bio-inspired platforms. We use the developed FOM to analyze optimal gaits and compare the performance between different fin materials, providing a better understanding of how fin materials affect thrust generation and propulsive efficiency and allowing us to inform control systems and weight for efficiency on the developed inverse gait-selector model.
Read more7/2/2024