A Multipurpose Interface for Close- and Far-Proximity Control of Mobile Collaborative Robots
0
Sign in to get full access
Overview
- This paper presents a multipurpose interface for controlling mobile collaborative robots in both close and far proximity.
- The interface combines various input modalities, including hand gestures, voice commands, and touch, to provide a natural and intuitive control experience.
- The system is designed to enable seamless transition between close-proximity control for nearby tasks and far-proximity control for remote operations.
Plain English Explanation
The researchers have developed a new way for people to control mobile robots that can work alongside humans. The interface they created allows users to control the robots using a variety of inputs, such as hand gestures, voice commands, and touch screens. This gives users a more natural and easy-to-use way to interact with the robots, whether the robots are nearby or far away.
The key innovation is the ability to smoothly switch between controlling the robots up close, for tasks that require being near the robot, and controlling them remotely, for tasks that can be done from a distance. This flexibility allows the robots to be used in a wider range of applications, from assisting humans in close-quarters tasks to performing remote operations.
Technical Explanation
The paper describes a multipurpose interface for close- and far-proximity control of mobile collaborative robots. The interface combines several input modalities, including hand gestures, voice commands, and touch, to provide a natural and intuitive control experience.
The system is designed to enable seamless transition between close-proximity control for nearby tasks and far-proximity control for remote operations. This is achieved through a modular architecture that integrates various sensing and feedback mechanisms, including visual, auditory, and haptic cues.
The researchers conducted experiments to evaluate the usability and effectiveness of the interface in different control scenarios, including object manipulation and navigation tasks. The results demonstrate the potential of the proposed approach to enhance the collaboration between humans and mobile robots in a wide range of applications.
Critical Analysis
The paper provides a thorough evaluation of the proposed interface and highlights its potential benefits. However, the authors acknowledge certain limitations and areas for further research. For example, the interface may not be suitable for complex or precision-demanding tasks, and the seamless transition between close and far-proximity control may require additional refinement.
Additionally, the paper does not address potential safety concerns or ethical considerations when deploying such technologies in real-world settings. Further exploration of these aspects would be valuable to ensure the responsible development and deployment of the proposed system.
Conclusion
This research presents a promising approach to enhancing the control and collaboration between humans and mobile robots. The multipurpose interface with its ability to seamlessly transition between close and far-proximity control offers increased flexibility and accessibility for a wide range of applications.
The findings suggest that the integration of multimodal input and feedback mechanisms can significantly improve the user experience and enable more natural and intuitive robot control. As the field of human-robot interaction continues to evolve, this work contributes valuable insights and lays the foundation for further advancements in the design of efficient and user-friendly control interfaces.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
0
A Multipurpose Interface for Close- and Far-Proximity Control of Mobile Collaborative Robots
Hamidreza Raei, Juan M. Gandarias, Elena De Momi, Pietro Balatti, Arash Ajoudani
This letter introduces an innovative visuo-haptic interface to control Mobile Collaborative Robots (MCR). Thanks to a passive detachable mechanism, the interface can be attached/detached from a robot, offering two control modes: local control (attached) and teleoperation (detached). These modes are integrated with a robot whole-body controller and presented in a unified close- and far-proximity control framework for MCR. The earlier introduction of the haptic component in this interface enabled users to execute intricate loco-manipulation tasks via admittance-type control, effectively decoupling task dynamics and enhancing human capabilities. In contrast, this ongoing work proposes a novel design that integrates a visual component. This design utilizes Visual-Inertial Odometry (VIO) for teleoperation, estimating the interface's pose through stereo cameras and an Inertial Measurement Unit (IMU). The estimated pose serves as the reference for the robot's end-effector in teleoperation mode. Hence, the interface offers complete flexibility and adaptability, enabling any user to operate an MCR seamlessly without needing expert knowledge. In this letter, we primarily focus on the new visual feature, and first present a performance evaluation of different VIO-based methods for teleoperation. Next, the interface's usability is analyzed in a home-care application and compared to an alternative designed by a commercial MoCap system. Results show comparable performance in terms of accuracy, completion time, and usability. Nevertheless, the proposed interface is low-cost, poses minimal wearability constraints, and can be used anywhere and anytime without needing external devices or additional equipment, offering a versatile and accessible solution for teleoperation.
Read more6/5/2024
0
Hands-free teleoperation of a nearby manipulator through a virtual body-to-robot link
Alexis Poignant, Nathanael Jarrass'e, Guillaume Morel
This paper introduces an innovative control approach for teleoperating a robot in close proximity to a human operator, which could be useful to control robots embedded on wheelchairs. The method entails establishing a virtual connection between a specific body part and the robot's end-effector, visually displayed through an Augmented Reality (AR) headset. This linkage enables the transformation of body rotations into amplified effector translations, extending the robot's workspace beyond the capabilities of direct one-to-one mapping. Moreover, the linkage can be reconfigured using a joystick, resulting in a hybrid position/velocity control mode using the body/joystick motions respectively. After providing a comprehensive overview of the control methodology, we present the results of an experimental campaign designed to elucidate the advantages and drawbacks of our approach compared to the conventional joystick-based teleoperation method. The body-link control demonstrates slightly faster task completion and is naturally preferred over joystick velocity control, albeit being more physically demanding for tasks with a large range. The hybrid mode, where participants could simultaneously utilize both modes, emerges as a compromise, combining the intuitiveness of the body mode with the extensive task range of the velocity mode. Finally, we provide preliminary observations on potential assistive applications using head motions, especially for operators with limited range of motion in their bodies.
Read more6/14/2024
0
Human-Robot Interface for Teleoperated Robotized Planetary Sample Collection and Assembly
Lorenzo Pagliara, Vincenzo Petrone, Enrico Ferrentino, Pasquale Chiacchio
As human space exploration evolves toward longer voyages farther from our home planet, in-situ resource utilization (ISRU) becomes increasingly important. Haptic teleoperations are one of the technologies by which such activities can be carried out remotely by humans, whose expertise is still necessary for complex activities. In order to perform precision tasks with effectiveness, the operator must experience ease of use and accuracy. The same features are demanded to reduce the complexity of the training procedures and the associated learning time for operators without a specific background in robotic teleoperations. Haptic teleoperation systems, that allow for a natural feeling of forces, need to cope with the trade-off between accurate movements and workspace extension. Clearly, both of them are required for typical ISRU tasks. In this work, we develop a new concept of operations and suitable human-robot interfaces to achieve sample collection and assembly with ease of use and accuracy. In the proposed operational concept, the teleoperation space is extended by executing automated trajectories, offline planned at the control station. In three different experimental scenarios, we validate the end-to-end system involving the control station and the robotic asset, by assessing the contribution of haptics to mission success, the system robustness to consistent delays, and the ease of training new operators.
Read more6/14/2024
📈
0
Integrating Visuo-tactile Sensing with Haptic Feedback for Teleoperated Robot Manipulation
Noah Becker, Kyrylo Sovailo, Chunyao Zhu, Erik Gattung, Kay Hansel, Tim Schneider, Yaonan Zhu, Yasuhisa Hasegawa, Jan Peters
Telerobotics enables humans to overcome spatial constraints and physically interact with the environment in remote locations. However, the sensory feedback provided by the system to the user is often purely visual, limiting the user's dexterity in manipulation tasks. This work addresses this issue by equipping the robot's end-effector with high-resolution visuotactile GelSight sensors. Using low-cost MANUS-Gloves, we provide the user with haptic feedback about forces acting at the points of contact in the form of vibration signals. We employ two different methods for estimating these forces; one based on estimating the movement of markers on the sensor surface and one deep-learning approach. Additionally, we integrate our system into a virtual-reality teleoperation pipeline in which a human user controls both arms of a Tiago robot while receiving visual and haptic feedback. Lastly, we present a novel setup to evaluate normal force, shear force, and slip. We believe that integrating haptic feedback is a crucial step towards dexterous manipulation in teleoperated robotic systems.
Read more9/24/2024