Parametric Modeling and Estimation of Photon Registrations for 3D Imaging
0
Sign in to get full access
Overview
- This paper presents a parametric modeling and estimation approach for analyzing photon registrations in 3D imaging applications.
- The work is supported by funding from the DARPA / SRC CogniSense JUMP 2.0 Center, NSF IIS-2133032, and NSF ECCS-2030570.
- The proposed method addresses challenges in time-correlated single-photon counting and single-photon avalanche diode sensors, including dead time effects and efficient model parameter estimation.
Plain English Explanation
The paper describes a new way to analyze data from 3D imaging systems that use specialized sensors to detect individual photons of light. These sensors, called single-photon avalanche diodes, have some limitations that can distort the measurements, such as a "dead time" where they cannot detect photons. The researchers developed a mathematical model to account for these effects and estimate the true properties of the 3D scene being imaged, like the distance to objects. This allows the 3D imaging system to produce more accurate results, which could be useful for applications like self-driving cars, robotics, or virtual/augmented reality.
Technical Explanation
The paper proposes a parametric modeling approach to address challenges in time-correlated single-photon counting and single-photon avalanche diode sensors used in 3D imaging. The key elements include:
- Modeling the photon detection process using a Poisson distribution and incorporating dead time effects.
- Developing an expectation-maximization (EM) algorithm to efficiently estimate the model parameters from the observed photon registrations.
- Demonstrating the effectiveness of the proposed approach through simulations and experiments on both synthetic and real-world 3D imaging data.
The parametric modeling and EM-based estimation enable more accurate reconstruction of 3D scenes, especially in situations with sparse photon registrations or significant sensor dead time effects, as may occur in low-light conditions or long-range LIDAR applications.
Critical Analysis
The paper provides a comprehensive theoretical analysis and validates the proposed approach through extensive simulations and experiments. However, some potential limitations and areas for further research are:
- The modeling and estimation framework assumes a single object or surface within the sensor's field of view. Extension to more complex, multi-modal 3D scenes may require further development.
- The approach relies on accurate characterization of the sensor's dead time parameters, which may vary in practice. Techniques for online estimation of these parameters could be explored.
- While the paper demonstrates the method's effectiveness, its computational complexity and potential real-time performance on embedded systems were not extensively analyzed.
Overall, the proposed parametric modeling and estimation framework represents a significant contribution to the field of 3D imaging with single-photon sensors, addressing important practical challenges.
Conclusion
This paper presents a novel parametric modeling and estimation approach for analyzing photon registrations in 3D imaging applications. By incorporating sensor dead time effects and using an efficient EM-based estimation algorithm, the method can produce more accurate 3D reconstructions, especially in challenging scenarios with sparse photon data or long-range sensing. The technical insights and experimental validations in this work advance the state of the art in 3D imaging with single-photon sensors, with potential impacts on applications such as autonomous vehicles, robotics, and virtual/augmented reality.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
0
Parametric Modeling and Estimation of Photon Registrations for 3D Imaging
Weijian Zhang, Hashan K. Weerasooriya, Prateek Chennuri, Stanley H. Chan
In single-photon light detection and ranging (SP-LiDAR) systems, the histogram distortion due to hardware dead time fundamentally limits the precision of depth estimation. To compensate for the dead time effects, the photon registration distribution is typically modeled based on the Markov chain self-excitation process. However, this is a discrete process and it is computationally expensive, thus hindering potential neural network applications and fast simulations. In this paper, we overcome the modeling challenge by proposing a continuous parametric model. We introduce a Gaussian-uniform mixture model (GUMM) and periodic padding to address high noise floors and noise slopes respectively. By deriving and implementing a customized expectation maximization (EM) algorithm, we achieve accurate histogram matching in scenarios that were deemed difficult in the literature.
Read more7/4/2024
0
Single-Photon 3D Imaging with Equi-Depth Photon Histograms
Kaustubh Sadekar, David Maier, Atul Ingle
Single-photon cameras present a promising avenue for high-resolution 3D imaging. They have ultra-high sensitivity -- down to individual photons -- and can record photon arrival times with extremely high (sub-nanosecond) resolution. Single-photon 3D cameras estimate the round-trip time of a laser pulse by forming equi-width (EW) histograms of detected photon timestamps. Acquiring and transferring such EW histograms requires high bandwidth and in-pixel memory, making SPCs less attractive in resource-constrained settings such as mobile devices and AR/VR headsets. In this work we propose a 3D sensing technique based on equi-depth (ED) histograms. ED histograms compress timestamp data more efficiently than EW histograms, reducing the bandwidth requirement. Moreover, to reduce the in-pixel memory requirement, we propose a lightweight algorithm to estimate ED histograms in an online fashion without explicitly storing the photon timestamps. This algorithm is amenable to future in-pixel implementations. We propose algorithms that process ED histograms to perform 3D computer-vision tasks of estimating scene distance maps and performing visual odometry under challenging conditions such as high ambient light. Our work paves the way towards lower bandwidth and reduced in-pixel memory requirements for SPCs, making them attractive for resource-constrained 3D vision applications. Project page: $href{https://www.computational.camera/pedh}{https://www.computational.camera/pedh}$
Read more8/30/2024
š
0
Robust Point Cloud Registration in Robotic Inspection with Locally Consistent Gaussian Mixture Model
Lingjie Su, Wei Xu, Wenlong Li
In robotic inspection of aviation parts, achieving accurate pairwise point cloud registration between scanned and model data is essential. However, noise and outliers generated in robotic scanned data can compromise registration accuracy. To mitigate this challenge, this article proposes a probability-based registration method utilizing Gaussian Mixture Model (GMM) with local consistency constraint. This method converts the registration problem into a model fitting one, constraining the similarity of posterior distributions between neighboring points to enhance correspondence robustness. We employ the Expectation Maximization algorithm iteratively to find optimal rotation matrix and translation vector while obtaining GMM parameters. Both E-step and M-step have closed-form solutions. Simulation and actual experiments confirm the method's effectiveness, reducing root mean square error by 20% despite the presence of noise and outliers. The proposed method excels in robustness and accuracy compared to existing methods.
Read more7/25/2024
0
GMMCalib: Extrinsic Calibration of LiDAR Sensors using GMM-based Joint Registration
Ilir Tahiraj, Felix Fent, Philipp Hafemann, Egon Ye, Markus Lienkamp
State-of-the-art LiDAR calibration frameworks mainly use non-probabilistic registration methods such as Iterative Closest Point (ICP) and its variants. These methods suffer from biased results due to their pair-wise registration procedure as well as their sensitivity to initialization and parameterization. This often leads to misalignments in the calibration process. Probabilistic registration methods compensate for these drawbacks by specifically modeling the probabilistic nature of the observations. This paper presents GMMCalib, an automatic target-based extrinsic calibration approach for multi-LiDAR systems. Using an implementation of a Gaussian Mixture Model (GMM)-based registration method that allows joint registration of multiple point clouds, this data-driven approach is compared to ICP algorithms. We perform simulation experiments using the digital twin of the EDGAR research vehicle and validate the results in a real-world environment. We also address the local minima problem of local registration methods for extrinsic sensor calibration and use a distance-based metric to evaluate the calibration results. Our results show that an increase in robustness against sensor miscalibrations can be achieved by using GMM-based registration algorithms. The code is open source and available on GitHub.
Read more4/9/2024