Explicit Second-order LiDAR Bundle Adjustment Algorithm Using Mean Squared Group Metric
0
Sign in to get full access
Overview
- Proposes an explicit second-order LiDAR bundle adjustment algorithm using a mean squared group metric
- Introduces a robust kernel function to handle outliers
- Utilizes second-order state estimation for accurate parameter optimization
Plain English Explanation
The paper presents a new algorithm for improving the accuracy of 3D maps created from LiDAR (Light Detection and Ranging) data. LiDAR is a technology that uses laser beams to measure distances and create 3D models of the environment. However, the data collected by LiDAR sensors can contain errors, which can lead to inaccuracies in the final 3D map.
The proposed algorithm, called Explicit Second-order LiDAR Bundle Adjustment, aims to address this issue by explicitly considering the second-order (higher-level) relationships between the LiDAR measurements. This allows the algorithm to better identify and correct for any errors or inconsistencies in the data. Additionally, the algorithm uses a robust kernel function to handle outliers, which are measurements that are significantly different from the expected values.
The key innovation of this paper is the use of second-order state estimation, which means that the algorithm not only considers the current measurements but also the rate of change in those measurements over time. This provides a more accurate and stable optimization of the LiDAR parameters, resulting in a more precise 3D map.
Technical Explanation
The paper presents an Explicit Second-order LiDAR Bundle Adjustment Algorithm Using Mean Squared Group Metric. The algorithm is designed to improve the accuracy of 3D maps created from LiDAR data by explicitly considering the second-order relationships between the measurements.
The algorithm uses a mean squared group metric to measure the distance between the observed LiDAR measurements and the predicted measurements based on the current parameter estimates. This metric is then optimized using a second-order state estimation technique, which takes into account the rate of change in the measurements over time.
To handle outliers in the data, the algorithm introduces a robust kernel function that reduces the influence of measurements that are significantly different from the expected values. This helps to improve the overall accuracy of the 3D map by reducing the impact of any erroneous measurements.
The paper includes experiments that demonstrate the effectiveness of the proposed algorithm in improving the accuracy of 3D maps created from LiDAR data, particularly in the presence of outliers or other sources of error.
Critical Analysis
The paper presents a novel and promising approach to improving the accuracy of 3D maps created from LiDAR data. The use of a second-order state estimation technique and a robust kernel function are interesting innovations that could have significant implications for the field of 3D mapping and reconstruction.
One potential limitation of the algorithm is that it may be computationally more expensive than some other bundle adjustment algorithms, due to the additional calculations required for the second-order state estimation. This could limit its practical application in real-time or resource-constrained scenarios.
Additionally, the paper does not provide a detailed analysis of the limitations or potential failure cases of the proposed algorithm. It would be helpful to have a more thorough discussion of the conditions under which the algorithm may not perform well or may produce suboptimal results.
Overall, the paper presents a compelling approach to LiDAR bundle adjustment and offers a valuable contribution to the field of 3D mapping and reconstruction. Further research and validation of the algorithm's performance in a wider range of scenarios would be highly valuable.
Conclusion
The Explicit Second-order LiDAR Bundle Adjustment Algorithm presented in this paper offers a novel and promising approach to improving the accuracy of 3D maps created from LiDAR data. By explicitly considering the second-order relationships between LiDAR measurements and using a robust kernel function to handle outliers, the algorithm is able to produce more accurate and stable 3D models.
The key innovation of this work is the use of second-order state estimation, which provides a more comprehensive optimization of the LiDAR parameters. This, in turn, leads to a more precise and reliable 3D map that could have significant implications for a wide range of applications, from autonomous navigation to urban planning and beyond.
While the algorithm may have some computational overhead compared to other bundle adjustment techniques, the potential benefits in terms of improved 3D mapping accuracy make it a valuable contribution to the field. Further research and validation of the algorithm's performance in a wider range of scenarios would be highly valuable in assessing its practical applicability and potential for real-world impact.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
0
Explicit Second-order LiDAR Bundle Adjustment Algorithm Using Mean Squared Group Metric
Tingchen Ma, Yongsheng Ou, Sheng Xu
The bundle adjustment (BA) algorithm is a widely used nonlinear optimization technique in the backend of Simultaneous Localization and Mapping (SLAM) systems. By leveraging the co-view relationships of landmarks from multiple perspectives, the BA method constructs a joint estimation model for both poses and landmarks, enabling the system to generate refined maps and reduce front-end localization errors. However, there are unique challenges when applying the BA for LiDAR data, due to the large volume of 3D points. Exploring a robust LiDAR BA estimator and achieving accurate solutions is a very important issue. In this work, firstly we propose a novel mean square group metric (MSGM) to build the optimization objective in the LiDAR BA algorithm. This metric applies mean square transformation to uniformly process the measurement of plane landmarks from one sampling period. The transformed metric ensures scale interpretability, and does not requie a time-consuming point-by-point calculation. Secondly, by integrating a robust kernel function, the metrics involved in the BA algorithm are reweighted, and thus enhancing the robustness of the solution process. Thirdly, based on the proposed robust LiDAR BA model, we derived an explicit second-order estimator (RSO-BA). This estimator employs analytical formulas for Hessian and gradient calculations, ensuring the precision of the BA solution. Finally, we verify the merits of the proposed RSO-BA estimator against existing implicit second-order and explicit approximate second-order estimators using the publicly available datasets. The experimental results demonstrate that the RSO-BA estimator outperforms its counterparts regarding registration accuracy and robustness, particularly in large-scale or complex unstructured environments.
Read more9/24/2024
0
New!SGBA: Semantic Gaussian Mixture Model-Based LiDAR Bundle Adjustment
Xingyu Ji, Shenghai Yuan, Jianping Li, Pengyu Yin, Haozhi Cao, Lihua Xie
LiDAR bundle adjustment (BA) is an effective approach to reduce the drifts in pose estimation from the front-end. Existing works on LiDAR BA usually rely on predefined geometric features for landmark representation. This reliance restricts generalizability, as the system will inevitably deteriorate in environments where these specific features are absent. To address this issue, we propose SGBA, a LiDAR BA scheme that models the environment as a semantic Gaussian mixture model (GMM) without predefined feature types. This approach encodes both geometric and semantic information, offering a comprehensive and general representation adaptable to various environments. Additionally, to limit computational complexity while ensuring generalizability, we propose an adaptive semantic selection framework that selects the most informative semantic clusters for optimization by evaluating the condition number of the cost function. Lastly, we introduce a probabilistic feature association scheme that considers the entire probability density of assignments, which can manage uncertainties in measurement and initial pose estimation. We have conducted various experiments and the results demonstrate that SGBA can achieve accurate and robust pose refinement even in challenging scenarios with low-quality initial pose estimation and limited geometric features. We plan to open-source the work for the benefit of the community https://github.com/Ji1Xinyu/SGBA.
Read more10/3/2024
🤖
0
Efficient and Consistent Bundle Adjustment on Lidar Point Clouds
Zheng Liu, Xiyuan Liu, Fu Zhang
Bundle Adjustment (BA) refers to the problem of simultaneous determination of sensor poses and scene geometry, which is a fundamental problem in robot vision. This paper presents an efficient and consistent bundle adjustment method for lidar sensors. The method employs edge and plane features to represent the scene geometry, and directly minimizes the natural Euclidean distance from each raw point to the respective geometry feature. A nice property of this formulation is that the geometry features can be analytically solved, drastically reducing the dimension of the numerical optimization. To represent and solve the resultant optimization problem more efficiently, this paper then proposes a novel concept {it point clusters}, which encodes all raw points associated to the same feature by a compact set of parameters, the {it point cluster coordinates}. We derive the closed-form derivatives, up to the second order, of the BA optimization based on the point cluster coordinates and show their theoretical properties such as the null spaces and sparsity. Based on these theoretical results, this paper develops an efficient second-order BA solver. Besides estimating the lidar poses, the solver also exploits the second order information to estimate the pose uncertainty caused by measurement noises, leading to consistent estimates of lidar poses. Moreover, thanks to the use of point cluster, the developed solver fundamentally avoids the enumeration of each raw point (which is very time-consuming due to the large number) in all steps of the optimization: cost evaluation, derivatives evaluation and uncertainty evaluation. The implementation of our method is open sourced to benefit the robotics community and beyond.
Read more6/18/2024
0
Bundle Adjustment in the Eager Mode
Zitong Zhan, Huan Xu, Zihang Fang, Xinpeng Wei, Yaoyu Hu, Chen Wang
Bundle adjustment (BA) is a critical technique in various robotic applications, such as simultaneous localization and mapping (SLAM), augmented reality (AR), and photogrammetry. BA optimizes parameters such as camera poses and 3D landmarks to align them with observations. With the growing importance of deep learning in perception systems, there is an increasing need to integrate BA with deep learning frameworks for enhanced reliability and performance. However, widely-used C++-based BA frameworks, such as GTSAM, g$^2$o, and Ceres, lack native integration with modern deep learning libraries like PyTorch. This limitation affects their flexibility, adaptability, ease of debugging, and overall implementation efficiency. To address this gap, we introduce an eager-mode BA framework seamlessly integrated with PyPose, providing PyTorch-compatible interfaces with high efficiency. Our approach includes GPU-accelerated, differentiable, and sparse operations designed for 2nd-order optimization, Lie group and Lie algebra operations, and linear solvers. Our eager-mode BA on GPU demonstrates substantial runtime efficiency, achieving an average speedup of 18.5$times$, 22$times$, and 23$times$ compared to GTSAM, g$^2$o, and Ceres, respectively.
Read more9/19/2024