Self-stabilization and byzantine tolerance for maximal independent
0
👀
Sign in to get full access
Overview
- This paper analyzes the impact of transient and Byzantine faults on the construction of a maximal independent set (MIS) in a general network.
- The authors adapt a self-stabilizing algorithm to compute such a vertex set, which can tolerate both transient and Byzantine faults.
- The algorithm is proven to converge in O(Δn) rounds with high probability, where n is the network size and Δ is the maximum degree.
- A modified version for anonymous systems under the adversarial distributed daemon is also presented, which converges in O(n^2) expected number of steps.
Plain English Explanation
The paper focuses on a problem called "maximal independent set (MIS) computation" in a computer network. This problem is about finding a set of nodes in the network that are not directly connected to each other, and this set is as large as possible.
The researchers looked at what happens when the network experiences two types of problems: transient faults (temporary glitches that can disrupt the system) and Byzantine faults (when some nodes in the network behave in unexpected or malicious ways).
To address these challenges, the researchers adapted an existing algorithm that can "self-stabilize" - meaning it can recover from any initial state and converge to the correct solution. They proved that this modified algorithm can tolerate both transient and Byzantine faults.
The key insight is that while Byzantine nodes can prevent nearby nodes from participating in the MIS, the algorithm can still construct a large MIS by excluding those nodes and some of their neighbors. The algorithm is shown to converge quickly, in a number of rounds that depends on the size and maximum degree of the network.
The researchers also present a version of the algorithm that works in anonymous networks (where nodes don't have unique IDs) and converges in a reasonable expected number of steps.
Technical Explanation
The authors adapt the self-stabilizing algorithm presented by Turau for computing a maximal independent set (MIS) in a general network. Their algorithm is designed to tolerate both transient and Byzantine faults.
Byzantine nodes can prevent nodes close to them from taking part in the independent set for an arbitrarily long time. To address this, the authors focus on the set of all nodes excluding nodes at distance 1 or less of Byzantine nodes, and excluding some of the nodes at distance 2. This allows them to bound the impact of Byzantine nodes.
The authors prove that their algorithm converges in O(Δn) rounds with high probability, where n is the network size and Δ is the maximum degree. They also present a modified version for anonymous systems under the adversarial distributed daemon that converges in O(n^2) expected number of steps.
Critical Analysis
The paper presents a novel algorithm that can tolerate both transient and Byzantine faults in the context of MIS computation. This is an important contribution, as Byzantine robustness is a crucial property for many distributed systems.
However, the authors acknowledge that Byzantine nodes can still prevent nearby nodes from participating in the MIS for an arbitrarily long time. This limitation could be relevant in certain applications where rapid convergence is crucial.
Additionally, the analysis of the modified anonymous version of the algorithm relies on the adversarial distributed daemon model, which may not always be the most realistic assumption. Further research could explore the performance of the algorithm under different daemon models.
Overall, the paper presents a solid technical contribution, but as with any research, there are opportunities for further improvements and extensions to address its current limitations.
Conclusion
This paper makes an important contribution to the field of distributed computing by presenting a self-stabilizing algorithm that can tolerate both transient and Byzantine faults in the context of maximal independent set computation. The authors' key insights on bounding the impact of Byzantine nodes and providing efficient solutions for both general and anonymous networks are valuable advancements in this area of research. While the algorithm has some limitations, the work lays the groundwork for further exploration of fault-tolerant distributed algorithms that can enhance the reliability and security of critical distributed systems.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
👀
0
Self-stabilization and byzantine tolerance for maximal independent
Johanne Cohen, Laurence Pilard, Franc{c}ois Pirot, Jonas S'enizergues
We analyze the impact of transient and Byzantine faults on the construction of a maximal independent set in a general network. We adapt the self-stabilizing algorithm presented by Turau `for computing such a vertex set. Our algorithm is self-stabilizing and also works under the more difficult context of arbitrary Byzantine faults. Byzantine nodes can prevent nodes close to them from taking part in the independent set for an arbitrarily long time. We give boundaries to their impact by focusing on the set of all nodes excluding nodes at distance 1 or less of Byzantine nodes, and excluding some of the nodes at distance 2. As far as we know, we present the first algorithm tolerating both transient and Byzantine faults under the fair distributed daemon. We prove that this algorithm converges in $ mathcal O(Delta n)$ rounds w.h.p., where $n$ and $Delta$ are the size and the maximum degree of the network, resp. Additionally, we present a modified version of this algorithm for anonymous systems under the adversarial distributed daemon that converges in $ mathcal O(n^{2})$ expected number of steps.
Read more6/11/2024
📈
0
Self-Stabilizing MIS Computation in the Beeping Model
George Giakkoupis, Volker Turau, Isabella Ziccardi
We consider self-stabilizing algorithms to compute a Maximal Independent Set (MIS) in the extremely weak beeping communication model. The model consists of an anonymous network with synchronous rounds. In each round, each vertex can optionally transmit a signal to all its neighbors (beep). After the transmission of a signal, each vertex can only differentiate between no signal received, or at least one signal received. We also consider an extension of this model where vertices can transmit signals through two distinguishable beeping channels. We assume that vertices have some knowledge about the topology of the network. We revisit the not self-stabilizing algorithm proposed by Jeavons, Scott, and Xu (2013), which computes an MIS in the beeping model. We enhance this algorithm to be self-stabilizing, and explore three different variants, which differ in the knowledge about the topology available to the vertices and the number of beeping channels. In the first variant, every vertex knows an upper bound on the maximum degree $Delta$ of the graph. For this case, we prove that the proposed self-stabilizing version maintains the same run-time as the original algorithm, i.e., it stabilizes after $O(log n)$ rounds w.h.p. on any $n$-vertex graph. In the second variant, each vertex only knows an upper bound on its own degree. For this case, we prove that the algorithm stabilizes after $O(log ncdot log log n)$ rounds on any $n$-vertex graph, w.h.p. In the third variant, we consider the model with two beeping channels, where every vertex knows an upper bound of the maximum degree of the nodes in the $1$-hop neighborhood. We prove that this variant stabilizes w.h.p. after $O(log n)$ rounds.
Read more9/4/2024
🌐
0
Fault-tolerant Consensus in Anonymous Dynamic Network
Qinzi Zhang, Lewis Tseng
This paper studies the feasibility of reaching consensus in an anonymous dynamic network. In our model, $n$ anonymous nodes proceed in synchronous rounds. We adopt a hybrid fault model in which up to $f$ nodes may suffer crash or Byzantine faults, and the dynamic message adversary chooses a communication graph for each round. We introduce a stability property of the dynamic network -- $(T,D)$-dynaDegree for $T geq 1$ and $n-1 geq D geq 1$ -- which requires that for every $T$ consecutive rounds, any fault-free node must have incoming directed links from at least $D$ distinct neighbors. These links might occur in different rounds during a $T$-round interval. $(1,n-1)$-dynaDegree means that the graph is a complete graph in every round. $(1,1)$-dynaDegree means that each node has at least one incoming neighbor in every round, but the set of incoming neighbor(s) at each node may change arbitrarily between rounds. We show that exact consensus is impossible even with $(1,n-2)$-dynaDegree. For an arbitrary $T$, we show that for crash-tolerant approximate consensus, $(T,lfloor n/2 rfloor)$-dynaDegree and $n > 2f$ are together necessary and sufficient, whereas for Byzantine approximate consensus, $(T,lfloor (n+3f)/2 rfloor)$-dynaDegree and $n > 5f$ are together necessary and sufficient.
Read more5/7/2024
0
Universal Finite-State and Self-Stabilizing Computation in Anonymous Dynamic Networks
Giuseppe A. Di Luna, Giovanni Viglietta
A network is said to be anonymous if its agents are indistinguishable from each other; it is dynamic if its communication links may appear or disappear unpredictably over time. Assuming that an anonymous dynamic network is always connected and each of its $n$ agents is initially given an input, it takes $2n$ communication rounds for the agents to compute an arbitrary (frequency-based) function of such inputs (Di Luna-Viglietta, DISC 2023). It is known that, without making additional assumptions on the network and without knowing the number of agents $n$, it is impossible to compute most functions and explicitly terminate. In fact, current state-of-the-art algorithms only achieve stabilization, i.e., allow each agent to return an output after every communication round; outputs can be changed, and are guaranteed to be all correct after $2n$ rounds. Such algorithms rely on the incremental construction of a data structure called history tree, which is augmented at every round. Thus, they end up consuming an unlimited amount of memory, and are also prone to errors in case of memory loss or corruption. In this paper, we provide a general self-stabilizing algorithm for anonymous dynamic networks that stabilizes in $max{4n-2h, 2h}$ rounds (where $h$ measures the amount of corrupted data initially present in the memory of each agent), as well as a general finite-state algorithm that stabilizes in $3n^2$ rounds. Our work improves upon previously known methods that only apply to static networks (Boldi-Vigna, Dist. Comp. 2002). In addition, we develop new fundamental techniques and operations involving history trees, which are of independent interest.
Read more9/4/2024