Stiffness-Tuneable Limb Segment with Flexible Spine for Malleable Robots
2404.09653
0
0
Abstract
Robotic arms built from stiffness-adjustable, continuously bending segments serially connected with revolute joints have the ability to change their mechanical architecture and workspace, thus allowing high flexibility and adaptation to different tasks with less than six degrees of freedom, a concept that we call malleable robots. Known stiffening mechanisms may be used to implement suitable links for these novel robotic manipulators; however, these solutions usually show a reduced performance when bending due to structural deformation. By including an inner support structure this deformation can be minimised, resulting in an increased stiffening performance. This paper presents a new multi-material spine-inspired flexible structure for providing support in stiffness-controllable layer-jamming-based robotic links of large diameter. The proposed spine mechanism is highly movable with type and range of motions that match those of a robotic link using solely layer jamming, whilst maintaining a hollow and light structure. The mechanics and design of the flexible spine are explored, and a prototype of a link utilising it is developed and compared with limb segments based on granular jamming and layer jamming without support structure. Results of experiments verify the advantages of the proposed design, demonstrating that it maintains a constant central diameter across bending angles and presents an improvement of more than 203% of resisting force at 180 degrees.
Create account to get full access
Overview
- This paper presents a novel design for a stiffness-tunable limb segment with a flexible spine, aimed at creating malleable robots.
- The key innovation is a mechanism that allows the stiffness of the limb segment to be dynamically adjusted, enabling the robot to adapt its rigidity to different tasks and environments.
- The flexible spine design provides additional compliance and adaptability, allowing the robot to navigate through constrained spaces and conform to complex surfaces.
Plain English Explanation
The researchers have developed a new type of robot limb that can change its stiffness, or rigidity, on demand. This is useful for robots that need to be able to adapt to different tasks and environments.
Imagine a robot arm that can be firm and strong when lifting heavy objects, but then become soft and flexible when navigating tight spaces or delicate surfaces. That's the idea behind this stiffness-tuneable limb segment.
The key innovation is a mechanism that allows the limb's stiffness to be adjusted. This is combined with a flexible "spine" running through the middle of the limb, similar to a compliant tactile palm. This spine gives the limb additional compliance and the ability to conform to different shapes, like a soft actuator.
Overall, this design aims to create a malleable robot that can adapt its physical properties to better handle a wide range of tasks and environments, from reconfigurable aerial robots to assistive devices.
Technical Explanation
The researchers developed a limb segment design that consists of two key components:
-
A stiffness-tunable mechanism that allows the rigidity of the limb to be dynamically adjusted. This is achieved through the use of an antagonistic pair of pneumatic actuators that can vary the tension in the limb's structure.
-
A flexible spine running through the center of the limb, providing additional compliance and the ability to conform to different shapes. This spine is made of a soft, flexible material and is connected to the stiffness-tunable mechanism.
The combination of the stiffness-tunable mechanism and the flexible spine allows the limb segment to adapt its physical properties to different tasks and environments. When the limb needs to be rigid and strong, the actuators can increase the tension, making the limb more stiff. When the limb needs to be soft and compliant, the actuators can reduce the tension, allowing the flexible spine to deform and conform to the environment.
The researchers conducted experiments to characterize the stiffness-tuning capabilities of the limb segment and demonstrated its ability to adapt to different tasks, such as supporting heavy loads and navigating through constrained spaces.
Critical Analysis
The researchers have presented a promising approach for creating malleable robot limbs with tunable stiffness and compliance. The use of antagonistic pneumatic actuators to control the limb's rigidity is a clever design choice that allows for rapid and precise adjustments.
However, one potential limitation is the reliance on pneumatic actuation, which can be bulky and require a separate air supply. Future iterations of the design could explore alternative actuation methods, such as soft actuators, to improve the overall compactness and integration of the system.
Additionally, while the flexible spine provides the desired compliance, the researchers did not extensively explore the limits of the limb's deformation or its ability to withstand high loads in the soft, flexible state. Further testing and analysis in these areas could help identify any potential weaknesses or failure modes of the design.
Overall, the stiffness-tunable limb segment with a flexible spine represents an important step towards malleable robots that can adapt to a wide range of tasks and environments. Continued research and refinement of the design could lead to significant advances in areas such as robotic manipulation, assistive devices, and reconfigurable aerial robotics.
Conclusion
The researchers have developed a novel limb segment design that combines a stiffness-tunable mechanism with a flexible spine, enabling robots to dynamically adjust their rigidity and compliance to better adapt to different tasks and environments.
This innovation has the potential to advance the field of malleable robotics, allowing for more versatile and adaptable systems that can handle a wider range of challenges. By combining the strengths of rigid and soft robotic approaches, the stiffness-tunable limb segment represents an important step towards creating robots that can seamlessly navigate and interact with the physical world.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
A Modular, Tendon Driven Variable Stiffness Manipulator with Internal Routing for Improved Stability and Increased Payload Capacity
Kyle L. Walker, Alix J. Partridge, Hsing-Yu Chen, Rahul R. Ramachandran, Adam A. Stokes, Kenjiro Tadakuma, Lucas Cruz da Silva, Francesco Giorgio-Serchi
0
0
Stability and reliable operation under a spectrum of environmental conditions is still an open challenge for soft and continuum style manipulators. The inability to carry sufficient load and effectively reject external disturbances are two drawbacks which limit the scale of continuum designs, preventing widespread adoption of this technology. To tackle these problems, this work details the design and experimental testing of a modular, tendon driven bead-style continuum manipulator with tunable stiffness. By embedding the ability to independently control the stiffness of distinct sections of the structure, the manipulator can regulate it's posture under greater loads of up to 1kg at the end-effector, with reference to the flexible state. Likewise, an internal routing scheme vastly improves the stability of the proximal segment when operating the distal segment, reducing deviations by at least 70.11%. Operation is validated when gravity is both tangential and perpendicular to the manipulator backbone, a feature uncommon in previous designs. The findings presented in this work are key to the development of larger scale continuum designs, demonstrating that flexibility and tip stability under loading can co-exist without compromise.
5/6/2024
Design and Nonlinear Modeling of a Modular Cable Driven Soft Robotic Arm
Xinda Qi, Yu Mei, Dong Chen, Zhaojian Li, Xiaobo Tan
0
0
We propose a novel multi-section cable-driven soft robotic arm inspired by octopus tentacles along with a new modeling approach. Each section of the modular manipulator is made of a soft tubing backbone, a soft silicon arm body, and two rigid endcaps, which connect adjacent sections and decouple the actuation cables of different sections. The soft robotic arm is made with casting after the rigid endcaps are 3D-printed, achieving low-cost and convenient fabrication. To capture the nonlinear effect of cables pushing into the soft silicon arm body, which results from the absence of intermediate rigid cable guides for higher compliance, an analytical static model is developed to capture the relationship between the bending curvature and the cable lengths. The proposed model shows superior prediction performance in experiments over that of a baseline model, especially under large bending conditions. Based on the nonlinear static model, a kinematic model of a multi-section arm is further developed and used to derive a motion planning algorithm. Experiments show that the proposed soft arm has high flexibility and a large workspace, and the tracking errors under the algorithm based on the proposed modeling approach are up to 52$%$ smaller than those with the algorithm derived from the baseline model. The presented modeling approach is expected to be applicable to a broad range of soft cable-driven actuators and manipulators.
5/17/2024
Towards Biomechanical Evaluation of a Transformative Additively Manufactured Flexible Pedicle Screw for Robotic Spinal Fixation
Yash Kulkarni, Susheela Sharma, Jordan P. Amadio, Farshid Alambeigi
0
0
Vital for spinal fracture treatment, pedicle screw fixation is the gold standard for spinal fixation procedures. Nevertheless, due to the screw pullout and loosening issues, this surgery often fails to be effective for patients suffering from osteoporosis (i.e., having low bone mineral density). These failures can be attributed to the rigidity of existing drilling instruments and pedicle screws forcing clinicians to place these implants into the osteoporotic regions of the vertebral body. To address this critical issue, we have developed a steerable drilling robotic system and evaluated its performance in drilling various J- and U-shape trajectories. Complementary to this robotic system, in this paper, we propose design, additive manufacturing, and biomechanical evaluation of a transformative flexible pedicle screw (FPS) that can be placed in pre-drilled straight and curved trajectories. To evaluate the performance of the proposed flexible implant, we designed and fabricated two different types of FPSs using the direct metal laser sintering (DMLS) process. Utilizing our unique experimental setup and ASTM standards, we then performed various pullout experiments on these FPSs to evaluate and analyze their biomechanical performance implanted in straight trajectories.
5/29/2024
✅
Cosserat Rod Modeling and Validation for a Soft Continuum Robot with Self-Controllable Variable Curvature
Xinran Wang, Nicolas Rojas
0
0
This paper introduces a Cosserat rod based mathematical model for modeling a self-controllable variable curvature soft continuum robot. This soft continuum robot has a hollow inner channel and was developed with the ability to perform variable curvature utilizing a growing spine. The growing spine is able to grow and retract while modifies its stiffness through milli-size particle (glass bubble) granular jamming. This soft continuum robot can then perform continuous curvature variation, unlike previous approaches whose curvature variation is discrete and depends on the number of locking mechanisms or manual configurations. The robot poses an emergent modeling problem due to the variable stiffness growing spine which is addressed in this paper. We investigate the property of growing spine stiffness and incorporate it into the Cosserat rod model by implementing a combined stiffness approach. We conduct experiments with the soft continuum robot in various configurations and compared the results with our developed mathematical model. The results show that the mathematical model based on the adapted Cosserat rod matches the experimental results with only a 3.3% error with respect to the length of the soft continuum robot.
6/28/2024