Wideband Beamforming for Near-Field Communications with Circular Arrays
2404.02811
0
0
Abstract
The beamforming performance of the uniform circular array (UCA) in near-field wideband communication systems is investigated. Compared to uniform linear array (ULA), UCA exhibits uniform effective array aperture in all directions, thus enabling more users to benefit from near-field communications. In this paper, the unique beam squint effect in near-field wideband UCA systems is comprehensively analyzed in both the distance and angular domains. It is rigorously demonstrated that the beam focal point only exists at a specific frequency in wideband UCA systems, resulting in significant beamforming loss. To alleviate this unique beam squint effect, the true-time delay (TTD)-based beamforming architecture is exploited. In particular, two wideband beamforming optimization approaches leveraging TTD units are proposed. 1) Analytical approach: In this approach, the phase shifters (PSs) and the time delay of TTD units are designed based on the analytical formula for beamforming gain. Following this design, the minimum number of TTD units required to achieve a predetermined beamforming gain is quantified. 2) Joint-optimization approach: In this method, the PSs and the TTD units are jointly optimized under practical maximum delay constraints to approximate the optimal unconstrained analog beamformer. Specifically, an efficient alternating optimization algorithm is proposed, where the PSs and the TTD units are alternately updated using either the closed-form solution or the low-complexity linear search approach. Extensive numerical results demonstrate that 1) the proposed beamforming schemes effectively mitigate the beam squint effect, and 2) the joint-optimization approach outperforms the analytical approach in terms of array gain and achievable spectral efficiency.
Create account to get full access
Overview
- This paper discusses a wideband beamforming technique for near-field communications using circular antenna arrays.
- The key focus is on addressing the beam squint issue, which can degrade the performance of wideband signals.
- The proposed approach combines true-time delay and hybrid beamforming to enable high-performance wideband beamforming in the near-field.
Plain English Explanation
Wideband beamforming is a crucial technique for near-field communications, which involves transmitting and receiving wireless signals over short distances. When dealing with wideband signals (those that span a wide range of frequencies), a problem known as "beam squint" can arise, where the beam points in different directions for different frequencies. This can degrade the performance of the communication system.
The researchers in this paper present a solution to this beam squint issue by combining two key techniques: true-time delay and hybrid beamforming. True-time delay helps ensure that the beam points in the same direction regardless of frequency, while hybrid beamforming efficiently combines digital and analog beamforming components.
By integrating these techniques, the researchers demonstrate a wideband beamforming approach that can maintain high performance even in the near-field, where communication devices are in close proximity. This could have important applications in areas like 5G and beyond communications, where wideband signals and near-field effects are common.
Technical Explanation
The paper proposes a wideband beamforming technique for near-field communications using a uniform circular array (UCA). To address the beam squint issue, the authors combine true-time delay and hybrid beamforming.
The true-time delay approach ensures that the beam points in the same direction regardless of frequency, while the hybrid beamforming architecture efficiently combines digital and analog beamforming components. The digital beamforming component handles wideband signals, while the analog component focuses on narrowband signals and phase shifts.
The researchers derive the optimal weights for the true-time delay and hybrid beamforming components, and they analyze the performance of the proposed approach in terms of beam patterns and achievable data rates. Simulation results demonstrate the effectiveness of the wideband beamforming technique in maintaining high performance in the near-field.
Critical Analysis
The paper provides a comprehensive solution to the beam squint issue in wideband near-field communications, which is a significant challenge in this domain. The authors have effectively integrated true-time delay and hybrid beamforming techniques to address this problem.
One potential limitation of the research is the assumption of a uniform circular array (UCA) structure. While UCAs offer advantages in near-field communications, other array geometries, such as reconfigurable arrays, may provide additional flexibility and performance improvements that are not explored in this work.
Additionally, the paper does not delve into the practical implementation challenges, such as the complexity and hardware requirements of the proposed solution. Further research could investigate the feasibility and trade-offs of deploying this wideband beamforming approach in real-world scenarios.
Conclusion
This paper presents a novel wideband beamforming technique for near-field communications using circular antenna arrays. By combining true-time delay and hybrid beamforming, the researchers have addressed the beam squint issue, a significant challenge in this domain.
The proposed approach demonstrates the ability to maintain high-performance wideband communication in the near-field, which has important implications for emerging technologies like 5G and beyond. Further research could explore the practical implementation aspects and assess the performance of this technique in more diverse array configurations and real-world settings.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
🚀
Codebook-Based Beam Tracking for Conformal ArrayEnabled UAV MmWave Networks
Jinglin Zhang, Wenjun Xu, Hui Gao, Miao Pan, Zhu Han, Ping Zhang
0
0
Millimeter wave (mmWave) communications can potentially meet the high data-rate requirements of unmanned aerial vehicle (UAV) networks. However, as the prerequisite of mmWave communications, the narrow directional beam tracking is very challenging because of the three-dimensional (3D) mobility and attitude variation of UAVs. Aiming to address the beam tracking difficulties, we propose to integrate the conformal array (CA) with the surface of each UAV, which enables the full spatial coverage and the agile beam tracking in highly dynamic UAV mmWave networks. More specifically, the key contributions of our work are three-fold. 1) A new mmWave beam tracking framework is established for the CA-enabled UAV mmWave network. 2) A specialized hierarchical codebook is constructed to drive the directional radiating element (DRE)-covered cylindrical conformal array (CCA), which contains both the angular beam pattern and the subarray pattern to fully utilize the potential of the CA. 3) A codebook-based multiuser beam tracking scheme is proposed, where the Gaussian process machine learning enabled UAV position/attitude predication is developed to improve the beam tracking efficiency in conjunction with the tracking-error aware adaptive beamwidth control. Simulation results validate the effectiveness of the proposed codebook-based beam tracking scheme in the CA-enabled UAV mmWave network, and demonstrate the advantages of CA over the conventional planner array in terms of spectrum efficiency and outage probability in the highly dynamic scenarios.
4/9/2024
Near-Field Beam Tracking with Extremely Large Dynamic Metasurface Antennas
Panagiotis Gavriilidis, George C. Alexandropoulos
0
0
The interplay between large antenna apertures and high frequencies in future generations of wireless networks will give rise to near-field communications. In this paper, we focus on the hybrid analog and digital beamforming architecture of dynamic metasurface antennas, which constitutes a recent prominent enabler of extremely massive antenna architectures, and devise a near-field beam tracking framework that initiates near-field beam sweeping only when the base station estimates that its provided beamforming gain drops below a threshold from its theoretically optimum value. Novel analytical expressions for the correlation function between any two beam focusing vectors, the beamforming gain with respect to user coordinate mismatch, the direction of the user movement yielding the fastest beamforming gain deterioration, and the minimum user displacement for a certain performance loss are presented. We also design a non-uniform coordinate grid for effectively sampling the user area of interest at each position estimation slot. Our extensive simulation results validate our theoretical analysis and showcase the superiority of the proposed near-field beam tracking over benchmarks.
6/4/2024
Near-field Beamforming for Extremely Large-scale MIMO Based on Unsupervised Deep Learning
Jiali Nie, Yuanhao Cui, Zhaohui Yang, Weijie Yuan, Xiaojun Jing
0
0
Extremely Large-scale Array (ELAA) is considered a frontier technology for future communication systems, pivotal in improving wireless systems' rate and spectral efficiency. However, as ELAA employs a multitude of antennas operating at higher frequencies, users are typically situated in the near-field region where the spherical wavefront propagates. This inevitably leads to a significant increase in the overhead of beam training, requiring complex two-dimensional beam searching in both the angle domain and the distance domain. To address this problem, we propose a near-field beamforming method based on unsupervised deep learning. Our convolutional neural network efficiently extracts complex channel state information features by strategically selecting padding and kernel size. We optimize the beamformers to maximize achievable rates in a multi-user network without relying on predefined custom codebooks. Upon deployment, the model requires solely the input of pre-estimated channel state information to derive the optimal beamforming vector. Simulation results show that our proposed scheme can obtain stable beamforming gain compared with the baseline scheme. Furthermore, owing to the inherent traits of deep learning methodologies, this approach substantially diminishes the beam training costs in near-field regions.
6/6/2024
Advancing Ultra-Reliable 6G: Transformer and Semantic Localization Empowered Robust Beamforming in Millimeter-Wave Communications
Avi Deb Raha, Kitae Kim, Apurba Adhikary, Mrityunjoy Gain, Choong Seon Hong
0
0
Advancements in 6G wireless technology have elevated the importance of beamforming, especially for attaining ultra-high data rates via millimeter-wave (mmWave) frequency deployment. Although promising, mmWave bands require substantial beam training to achieve precise beamforming. While initial deep learning models that use RGB camera images demonstrated promise in reducing beam training overhead, their performance suffers due to sensitivity to lighting and environmental variations. Due to this sensitivity, Quality of Service (QoS) fluctuates, eventually affecting the stability and dependability of networks in dynamic environments. This emphasizes a critical need for more robust solutions. This paper proposes a robust beamforming technique to ensure consistent QoS under varying environmental conditions. An optimization problem has been formulated to maximize users' data rates. To solve the formulated NP-hard optimization problem, we decompose it into two subproblems: the semantic localization problem and the optimal beam selection problem. To solve the semantic localization problem, we propose a novel method that leverages the k-means clustering and YOLOv8 model. To solve the beam selection problem, we propose a novel lightweight hybrid architecture that utilizes various data sources and a weighted entropy-based mechanism to predict the optimal beams. Rapid and accurate beam predictions are needed to maintain QoS. A novel metric, Accuracy-Complexity Efficiency (ACE), has been proposed to quantify this. Six testing scenarios have been developed to evaluate the robustness of the proposed model. Finally, the simulation result demonstrates that the proposed model outperforms several state-of-the-art baselines regarding beam prediction accuracy, received power, and ACE in the developed test scenarios.
6/24/2024