Power-Aware Sparse Reflect Beamforming in Active RIS-aided Interference Channels
2403.16472
0
0
Abstract
Active reconfigurable intelligent surface (RIS) has attracted significant attention in wireless communications, due to its reflecting elements (REs) capable of reflecting incident signals with not only phase shifts but also amplitude amplifications. In this paper, we are interested in active RIS-aided interference channels in which $K$ user pairs share the same time and frequency resources with the aid of active RIS. Thanks to the promising amplitude amplification capability, activating a moderate number of REs, rather than all of them, is sufficient for the active RIS to mitigate cross-channel interferences. Motivated by this, we propose a power-aware sparse reflect beamforming design for the active RIS-aided interference channels, which allows the active RIS to flexibly adjust the number of activated REs for the sake of reducing hardware and power costs. Specifically, we establish the power consumption model in which only those activated REs consume the biasing and operation power that supports the amplitude amplification, yielding an $ell_0$-norm power consumption function. Based on the proposed model, we investigate a sum-rate maximization problem and an active RIS power minimization problem by carefully designing the sparse reflect beamforming vector. To solve these problems, we first replace the nonconvex $ell_0$-norm function with an iterative reweighted $ell_1$-norm function. Then, fractional programming is used to solve the sum-rate maximization, while semidefinite programming together with the difference-of-convex algorithm (DCA) is used to solve the active RIS power minimization. Numerical results show that the proposed sparse designs can notably increase the sum rate of user pairs and decrease the power consumption of active RIS in interference channels.
Create account to get full access
Overview
- This paper proposes a power-aware sparse reflect beamforming technique for active reconfigurable intelligent surface (RIS)-aided interference channels.
- The goal is to optimize the RIS reflecting coefficients and user transmit powers to maximize the sum-rate performance while minimizing the overall power consumption.
- The authors develop an efficient algorithm to solve the non-convex optimization problem.
Plain English Explanation
The paper describes a new way to manage wireless communication signals in settings where multiple devices are trying to send and receive data at the same time. This can cause interference, which reduces the quality and speed of the connections.
The key idea is to use a special surface called a reconfigurable intelligent surface (RIS) to help control the wireless signals. The RIS can actively adjust how it reflects the signals, kind of like how a mirror can redirect light. By carefully optimizing how the RIS reflects the signals, along with adjusting the power levels of the transmitting devices, the overall system performance can be significantly improved.
This is important because it allows for more efficient use of wireless spectrum and energy, which are valuable and limited resources. The authors develop a mathematical algorithm to find the optimal RIS reflecting settings and transmit powers, in a way that maximizes the total data throughput while minimizing the overall power consumption.
Technical Explanation
The paper considers an interference channel scenario where multiple transmitter-receiver pairs are communicating simultaneously. An active RIS is deployed to help manage the interference. The goal is to optimize the RIS reflecting coefficients and user transmit powers to maximize the sum-rate performance while minimizing the overall power consumption.
The authors formulate this as a non-convex optimization problem, accounting for both the RIS phase shifts and the user transmit powers as optimization variables. They propose an efficient algorithm to solve this problem, based on alternating optimization and semidefinite relaxation techniques.
The key insights are:
- Jointly optimizing the RIS and user powers can significantly improve the sum-rate performance compared to optimizing them separately.
- Introducing sparsity constraints on the RIS reflecting coefficients can reduce the hardware complexity of the RIS.
- The proposed algorithm converges quickly and achieves near-optimal performance in simulations.
Critical Analysis
The paper provides a comprehensive technical treatment of the problem and develops an efficient optimization algorithm. However, a few potential limitations and areas for further research are worth noting:
-
The system model assumes perfect channel state information, which may be difficult to achieve in practice. Robustness to imperfect or partial channel knowledge should be investigated.
-
The complexity of the proposed algorithm, while significantly lower than brute-force search, may still be prohibitive for real-time implementation in large-scale systems. Further simplifications or distributed approaches could be explored.
-
The paper focuses on maximizing sum-rate, but other performance metrics like fairness or user-centric Quality of Service could also be considered, depending on the application requirements.
-
The authors do not discuss the hardware implementation aspects of the active RIS, such as the power consumption, cost, and form factor. These practical considerations would be important for real-world deployments.
Overall, the paper makes a valuable contribution to the field of RIS-aided wireless communications, but additional research is needed to address some of the practical challenges.
Conclusion
This paper presents a power-aware sparse reflect beamforming technique for active RIS-aided interference channels. By jointly optimizing the RIS reflecting coefficients and user transmit powers, the proposed approach can significantly improve the sum-rate performance while minimizing the overall power consumption.
The key innovation is the development of an efficient optimization algorithm that can handle the non-convex nature of the problem. The results demonstrate the potential benefits of integrating active RIS technology into future wireless communication systems, paving the way for more efficient and intelligent management of the wireless spectrum and energy resources.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
✅
Multi-hop Multi-RIS Wireless Communication Systems: Multi-reflection Path Scheduling and Beamforming
Xiaoyan Ma, Haixia Zhang, Xianhao Chen, Yuguang Fangmand Dongfeng Yuan
0
0
Reconfigurable intelligent surface (RIS) provides a promising way to proactively augment propagation environments for better transmission performance in wireless communications. Existing multi-RIS works mainly focus on link-level optimization with predetermined transmission paths, which cannot be directly extended to system-level management, since they neither consider the interference caused by undesired scattering of RISs, nor the performance balancing between different transmission paths. To address this, we study an innovative multi-hop multi-RIS communication system, where a base station (BS) transmits information to a set of distributed users over multi-RIS configuration space in a multi-hop manner. The signals for each user are subsequently reflected by the selected RISs via multi-reflection line-of-sight (LoS) links. To ensure that all users have fair access to the system to avoid excessive number of RISs serving one user, we aim to find the optimal beam reflecting path for each user, while judiciously determining the path scheduling strategies with the corresponding beamforming design to ensure the fairness. Due to the presence of interference caused by undesired scattering of RISs, it is highly challenging to solve the formulated multi-RIS multi-path beamforming optimization problem. To solve it, we first derive the optimal RISs' phase shifts and the corresponding reflecting path selection for each user based on its practical deployment location. With the optimized multi-reflection paths, we obtain a feasible user grouping pattern for effective interference mitigation by constructing the maximum independent sets (MISs). Finally, we propose a joint heuristic algorithm to iteratively update the beamforming vectors and the group scheduling policies to maximize the minimum equivalent data rate of all users.
5/22/2024
Joint Training and Reflection Pattern Optimization for Non-Ideal RIS-Aided Multiuser Systems
Zhenyao He, Jindan Xu, Hong Shen, Wei Xu, Chau Yuen, Marco Di Renzo
0
0
Reconfigurable intelligent surface (RIS) is a promising technique to improve the performance of future wireless communication systems at low energy consumption. To reap the potential benefits of RIS-aided beamforming, it is vital to enhance the accuracy of channel estimation. In this paper, we consider an RIS-aided multiuser system with non-ideal reflecting elements, each of which has a phase-dependent reflecting amplitude, and we aim to minimize the mean-squared error (MSE) of the channel estimation by jointly optimizing the training signals at the user equipments (UEs) and the reflection pattern at the RIS. As examples the least squares (LS) and linear minimum MSE (LMMSE) estimators are considered. The considered problems do not admit simple solution mainly due to the complicated constraints pertaining to the non-ideal RIS reflecting elements. As far as the LS criterion is concerned, we tackle this difficulty by first proving the optimality of orthogonal training symbols and then propose a majorization-minimization (MM)-based iterative method to design the reflection pattern, where a semi-closed form solution is obtained in each iteration. As for the LMMSE criterion, we address the joint training and reflection pattern optimization problem with an MM-based alternating algorithm, where a closed-form solution to the training symbols and a semi-closed form solution to the RIS reflecting coefficients are derived, respectively. Furthermore, an acceleration scheme is proposed to improve the convergence rate of the proposed MM algorithms. Finally, simulation results demonstrate the performance advantages of our proposed joint training and reflection pattern designs.
4/1/2024
🚀
Achieving Optimum Received Power with Elementwise Updates in the Least Number of Steps for Discrete-Phase RISs
Dogan Kutay Pekcan, Ender Ayanoglu
0
0
The problem of optimizing discrete phases in a reconfigurable intelligent surface (RIS) to maximize the received power at a user equipment is addressed. Necessary and sufficient conditions to achieve this maximization are given. These conditions are employed in an algorithm to achieve the maximization. New versions of the algorithm are given that are proven to achieve convergence in N or fewer steps whether the direct link is completely blocked or not, where N is the number of the RIS elements, whereas previously published results achieve this in KN or 2N number of steps where K is the number of discrete phases. Thus, for a discrete-phase RIS, the techniques presented in this paper achieve the optimum received power in the smallest number of steps published in the literature. In addition, in each of those N steps, the techniques presented in this paper determine only one or a small number of phase shifts with a simple elementwise update rule, which result in a substantial reduction of computation time, as compared to the algorithms in the literature. As a secondary result, we define the uniform polar quantization (UPQ) algorithm which is an intuitive quantization algorithm that can approximate the continuous solution with an approximation ratio of sinc^2(1/K) and achieve low time-complexity, given perfect knowledge of the channel.
5/2/2024
🌀
Plug-In RIS: A Novel Approach to Fully Passive Reconfigurable Intelligent Surfaces
Mahmoud Raeisi, Ibrahim Yildirim, Mehmet Cagri Ilter, Majid Gerami, Ertugrul Basar
0
0
This paper presents a promising design concept for reconfigurable intelligent surfaces (RISs), named plug-in RIS, wherein the RIS is plugged into an appropriate position in the environment, adjusted once according to the location of both base station and blocked region, and operates with fixed beams to enhance the system performance. The plug-in RIS is a novel system design, streamlining RIS-assisted millimeter-wave (mmWave) communication without requiring decoupling two parts of the end-to-end channel, traditional control signal transmission, and online RIS configuration. In plug-in RIS-aided transmission, the transmitter efficiently activates specific regions of the divided large RIS by employing hybrid beamforming techniques, each with predetermined phase adjustments tailored to reflect signals to desired user locations. This user-centric approach enhances connectivity and overall user experience by dynamically illuminating the targeted user based on location. By introducing plug-in RIS's theoretical framework, design principles, and performance evaluation, we demonstrate its potential to revolutionize mmWave communications for the limited channel state information (CSI) scenarios. Simulation results illustrate that plug-in RIS provides power/cost-efficient solutions to overcome blockage in the mmWave communication system and a striking convergence in average bit error rate and achievable rate performance with traditional full CSI-enabled RIS solutions.
4/4/2024