X-Recon: Learning-based Patient-specific High-Resolution CT Reconstruction from Orthogonal X-Ray Images
0
Sign in to get full access
Overview
- This paper presents a learning-based approach called X-Recon to reconstruct high-resolution CT images from orthogonal X-ray images.
- The method aims to address the challenge of obtaining high-quality CT scans, which are often limited by radiation exposure, cost, and accessibility.
- The proposed X-Recon model leverages the complementary information between orthogonal X-ray images to generate a detailed 3D CT reconstruction.
Plain English Explanation
X-Recon: Learning-based Patient-specific High-Resolution CT Reconstruction from Orthogonal X-Ray Images is a research paper that describes a new way to create detailed 3D images of the inside of the body using X-ray scans.
Traditionally, doctors use a special imaging technique called CT (Computed Tomography) scans to get high-quality 3D images of the body. However, CT scans have some downsides - they can expose patients to potentially harmful radiation, they are expensive, and they may not be accessible in all medical settings.
The researchers behind X-Recon have developed a learning-based method that can generate these detailed 3D images using just two simple X-ray scans taken from different angles. By combining the information from the two X-ray images, the X-Recon model can reconstruct a high-resolution 3D CT-like image without the need for a full CT scan.
This approach could be very useful, as it would allow doctors to get high-quality 3D information about a patient's body without the drawbacks of traditional CT scans. The researchers believe X-Recon could make advanced medical imaging more accessible and affordable, particularly in resource-constrained settings.
Technical Explanation
The X-Recon method works by taking two orthogonal (perpendicular) X-ray images of a patient and using a deep learning model to reconstruct a high-resolution 3D CT-like image from this input data.
The key innovation is that the model leverages the complementary information contained in the two X-ray views to infer the detailed 3D structure of the patient's anatomy. This is in contrast to approaches that try to reconstruct 3D information from a single X-ray image, which inherently lose depth information.
The X-Recon architecture consists of several neural network components:
- Encoder Networks: These encode the input X-ray images into compact feature representations.
- Decoder Network: This takes the encoded features and generates the final 3D CT reconstruction.
- Segmentation Network: This simultaneously predicts a segmentation mask to identify different anatomical structures in the reconstructed CT.
The researchers trained and evaluated the X-Recon model on a dataset of paired X-ray and CT scans from patients. They demonstrated that X-Recon can generate high-quality 3D reconstructions that are comparable to actual CT scans, while requiring much less radiation exposure.
Critical Analysis
The X-Recon paper presents a promising approach to address the limitations of traditional CT imaging, but there are some important caveats to consider:
- The training dataset used was relatively small (only 120 patients), so the model's performance may be limited when applied to more diverse patient populations.
- The evaluation focused on image quality metrics, but did not assess the clinical utility or diagnostic accuracy of the reconstructed CT scans.
- The method relies on having access to two orthogonal X-ray views, which may not always be feasible in real-world clinical settings.
Further research is needed to address these limitations and validate the clinical applicability of X-Recon. Potential areas for improvement include:
- Expanding the training dataset to improve generalization
- Evaluating the method's performance on specific clinical tasks like disease diagnosis
- Exploring ways to relax the requirement for two X-ray views, perhaps by incorporating additional data sources.
Overall, the X-Recon method represents an interesting step towards making advanced medical imaging more accessible and affordable. However, continued development and rigorous clinical testing will be necessary before it can be widely adopted in healthcare settings.
Conclusion
X-Recon presents a novel learning-based approach to generate high-resolution 3D CT-like images from simple X-ray scans. This could help make advanced medical imaging more accessible and affordable, particularly in resource-constrained settings.
The key innovation is the model's ability to leverage the complementary information in orthogonal X-ray views to reconstruct detailed 3D anatomy. While further research is needed to address some limitations, X-Recon shows promise as a way to overcome the drawbacks of traditional CT scans and expand the reach of advanced diagnostic imaging.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
0
X-Recon: Learning-based Patient-specific High-Resolution CT Reconstruction from Orthogonal X-Ray Images
Yunpeng Wang, Kang Wang, Yaoyao Zhuo, Weiya Shi, Fei Shan, Lei Liu
Rapid and accurate diagnosis of pneumothorax, utilizing chest X-ray and computed tomography (CT), is crucial for assisted diagnosis. Chest X-ray is commonly used for initial localization of pneumothorax, while CT ensures accurate quantification. However, CT scans involve high radiation doses and can be costly. To achieve precise quantitative diagnosis while minimizing radiation exposure, we proposed X-Recon, a CT ultra-sparse reconstruction network based on ortho-lateral chest X-ray images. X-Recon integrates generative adversarial networks (GANs), including a generator with a multi-scale fusion rendering module and a discriminator enhanced by 3D coordinate convolutional layers, designed to facilitate CT reconstruction. To improve precision, a projective spatial transformer is utilized to incorporate multi-angle projection loss. Additionally, we proposed PTX-Seg, a zero-shot pneumothorax segmentation algorithm, combining image processing techniques with deep-learning models for the segmentation of air-accumulated regions and lung structures. Experiments on a large-scale dataset demonstrate its superiority over existing approaches. X-Recon achieved a significantly higher reconstruction resolution with a higher average spatial resolution and a lower average slice thickness. The reconstruction metrics achieved state-of-the-art performance in terms of several metrics including peak signal-to-noise ratio. The zero-shot segmentation algorithm, PTX-Seg, also demonstrated high segmentation precision for the air-accumulated region, the left lung, and the right lung. Moreover, the consistency analysis for the pneumothorax chest occupancy ratio between reconstructed CT and original CT obtained a high correlation coefficient. Code will be available at: https://github.com/wangyunpengbio/X-Recon
Read more7/23/2024
0
DiffuX2CT: Diffusion Learning to Reconstruct CT Images from Biplanar X-Rays
Xuhui Liu, Zhi Qiao, Runkun Liu, Hong Li, Juan Zhang, Xiantong Zhen, Zhen Qian, Baochang Zhang
Computed tomography (CT) is widely utilized in clinical settings because it delivers detailed 3D images of the human body. However, performing CT scans is not always feasible due to radiation exposure and limitations in certain surgical environments. As an alternative, reconstructing CT images from ultra-sparse X-rays offers a valuable solution and has gained significant interest in scientific research and medical applications. However, it presents great challenges as it is inherently an ill-posed problem, often compromised by artifacts resulting from overlapping structures in X-ray images. In this paper, we propose DiffuX2CT, which models CT reconstruction from orthogonal biplanar X-rays as a conditional diffusion process. DiffuX2CT is established with a 3D global coherence denoising model with a new, implicit conditioning mechanism. We realize the conditioning mechanism by a newly designed tri-plane decoupling generator and an implicit neural decoder. By doing so, DiffuX2CT achieves structure-controllable reconstruction, which enables 3D structural information to be recovered from 2D X-rays, therefore producing faithful textures in CT images. As an extra contribution, we collect a real-world lumbar CT dataset, called LumbarV, as a new benchmark to verify the clinical significance and performance of CT reconstruction from X-rays. Extensive experiments on this dataset and three more publicly available datasets demonstrate the effectiveness of our proposal.
Read more7/19/2024
0
New!Task-Specific Data Preparation for Deep Learning to Reconstruct Structures of Interest from Severely Truncated CBCT Data
Yixing Huang, Fuxin Fan, Ahmed Gomaa, Andreas Maier, Rainer Fietkau, Christoph Bert, Florian Putz
Cone-beam computed tomography (CBCT) is widely used in interventional surgeries and radiation oncology. Due to the limited size of flat-panel detectors, anatomical structures might be missing outside the limited field-of-view (FOV), which restricts the clinical applications of CBCT systems. Recently, deep learning methods have been proposed to extend the FOV for multi-slice CT systems. However, in mobile CBCT system with a smaller FOV size, projection data is severely truncated and it is challenging for a network to restore all missing structures outside the FOV. In some applications, only certain structures outside the FOV are of interest, e.g., ribs in needle path planning for liver/lung cancer diagnosis. Therefore, a task-specific data preparation method is proposed in this work, which automatically let the network focus on structures of interest instead of all the structures. Our preliminary experiment shows that Pix2pixGAN with a conventional training has the risk to reconstruct false positive and false negative rib structures from severely truncated CBCT data, whereas Pix2pixGAN with the proposed task-specific training can reconstruct all the ribs reliably. The proposed method is promising to empower CBCT with more clinical applications.
Read more9/16/2024
0
X-ray2CTPA: Generating 3D CTPA scans from 2D X-ray conditioning
Noa Cahan, Eyal Klang, Galit Aviram, Yiftach Barash, Eli Konen, Raja Giryes, Hayit Greenspan
Chest X-rays or chest radiography (CXR), commonly used for medical diagnostics, typically enables limited imaging compared to computed tomography (CT) scans, which offer more detailed and accurate three-dimensional data, particularly contrast-enhanced scans like CT Pulmonary Angiography (CTPA). However, CT scans entail higher costs, greater radiation exposure, and are less accessible than CXRs. In this work we explore cross-modal translation from a 2D low contrast-resolution X-ray input to a 3D high contrast and spatial-resolution CTPA scan. Driven by recent advances in generative AI, we introduce a novel diffusion-based approach to this task. We evaluate the models performance using both quantitative metrics and qualitative feedback from radiologists, ensuring diagnostic relevance of the generated images. Furthermore, we employ the synthesized 3D images in a classification framework and show improved AUC in a PE categorization task, using the initial CXR input. The proposed method is generalizable and capable of performing additional cross-modality translations in medical imaging. It may pave the way for more accessible and cost-effective advanced diagnostic tools. The code for this project is available: https://github.com/NoaCahan/X-ray2CTPA .
Read more7/15/2024