Applying Extended Object Tracking for Self-Localization of Roadside Radar Sensors
0
Sign in to get full access
Overview
- This paper explores the use of extended object tracking for self-localization of roadside radar sensors.
- The researchers propose a method to estimate the pose of roadside radar sensors by tracking extended objects, such as vehicles, using radar data.
- This approach could enable more accurate and robust localization of roadside sensors, which is important for applications like smart city and autonomous vehicle infrastructure.
Plain English Explanation
The paper discusses a way to help roadside radar sensors figure out where they are located. Radar sensors are often used to monitor traffic and roads, but it can be tricky to know exactly where the sensors are placed. The researchers suggest using the radar data to track larger objects, like cars, and then use that information to estimate the position and orientation of the radar sensors themselves.
This is useful because knowing the precise location of the radar sensors is important for applications that rely on them, such as smart city infrastructure or autonomous vehicles. If the sensors can figure out where they are on their own, it makes the whole system more reliable and accurate.
Technical Explanation
The key idea is to use "extended object tracking" to estimate the pose (position and orientation) of roadside radar sensors. Extended object tracking refers to techniques that can track the shape and size of larger objects, like vehicles, rather than just treating them as single points.
By tracking the extended shapes of vehicles using the radar data, the researchers can infer the position and orientation of the radar sensors themselves. This is done through an optimization process that tries to match the observed vehicle shapes to a model of the environment.
The paper presents an experimental evaluation of this approach, demonstrating its effectiveness in estimating the pose of roadside radar sensors compared to other methods, such as radar odometry and multi-object tracking.
Critical Analysis
The paper provides a thorough technical explanation of the proposed approach and its experimental evaluation. However, it does not discuss the potential limitations or caveats of the method.
For example, the performance of the approach may be sensitive to the accuracy of the environmental model used, or it may require a sufficient number of extended objects (e.g., vehicles) to be present in the scene for reliable localization. Additionally, the method may have difficulty handling complex urban environments with many occluded or partially observed objects.
Further research could explore the robustness of the approach under various real-world conditions and investigate ways to address these potential limitations.
Conclusion
This paper presents a novel method for self-localization of roadside radar sensors using extended object tracking. By estimating the pose of the sensors based on the observed shapes of vehicles, this approach could enable more accurate and reliable localization of roadside infrastructure, which is crucial for applications like smart cities and autonomous driving. The experimental results are promising, but further research is needed to address potential limitations and explore the method's performance in complex real-world scenarios.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
0
Applying Extended Object Tracking for Self-Localization of Roadside Radar Sensors
Longfei Han, Qiuyu Xu, Klaus Kefferputz, Gordon Elger, Jurgen Beyerer
Intelligent Transportation Systems (ITS) can benefit from roadside 4D mmWave radar sensors for large-scale traffic monitoring due to their weatherproof functionality, long sensing range and low manufacturing cost. However, the localization method using external measurement devices has limitations in urban environments. Furthermore, if the sensor mount exhibits changes due to environmental influences, they cannot be corrected when the measurement is performed only during the installation. In this paper, we propose self-localization of roadside radar data using Extended Object Tracking (EOT). The method analyses both the tracked trajectories of the vehicles observed by the sensor and the aerial laser scan of city streets, assigns labels of driving behaviors such as straight ahead, left turn, right turn to trajectory sections and road segments, and performs Semantic Iterative Closest Points (SICP) algorithm to register the point cloud. The method exploits the result from a down stream task -- object tracking -- for localization. We demonstrate high accuracy in the sub-meter range along with very low orientation error. The method also shows good data efficiency. The evaluation is done in both simulation and real-world tests.
Read more7/4/2024
0
Scalable Radar-based Roadside Perception: Self-localization and Occupancy Heat Map for Traffic Analysis
Longfei Han, Qiuyu Xu, Klaus Kefferputz, Ying Lu, Gordon Elger, Jurgen Beyerer
4D mmWave radar sensors are suitable for roadside perception in city-scale Intelligent Transportation Systems (ITS) due to their long sensing range, weatherproof functionality, simple mechanical design, and low manufacturing cost. In this work, we investigate radar-based ITS for scalable traffic analysis. Localization of these radar sensors at city scale is a fundamental task in ITS. For flexible sensor setups, it requires even more effort. To address this task, we propose a self-localization approach that matches two descriptions of the road: the one from the geometry of the motion trajectories of cumulatively observed vehicles, and the other one from the aerial laser scan. An Iterative Closest Point (ICP) algorithm is used to register the motion trajectory in the road section of the laser scan. The resulting estimate of the transformation matrix represents the sensor pose in a global reference frame. We evaluate the results and show that it outperforms other map-based radar localization methods, especially for the orientation estimation. Beyond the localization result, we project radar sensor data onto a city-scale laser scan and generate a scalable occupancy heat map as a traffic analysis tool. This is demonstrated using two radar sensors monitoring an urban area in the real world.
Read more4/23/2024
➖
0
Landmark-based Vehicle Self-Localization Using Automotive Polarimetric Radars
Fabio Weishaupt, Julius F. Tilly, Nils Appenrodt, Pascal Fischer, Jurgen Dickmann, Dirk Heberling
Automotive self-localization is an essential task for any automated driving function. This means that the vehicle has to reliably know its position and orientation with an accuracy of a few centimeters and degrees, respectively. This paper presents a radar-based approach to self-localization, which exploits fully polarimetric scattering information for robust landmark detection. The proposed method requires no input from sensors other than radar during localization for a given map. By association of landmark observations with map landmarks, the vehicle's position is inferred. Abstract point- and line-shaped landmarks allow for compact map sizes and, in combination with the factor graph formulation used, for an efficient implementation. Evaluation of extensive real-world experiments in diverse environments shows a promising overall localization performance of $0.12 text{m}$ RMS absolute trajectory and $0.43 {}^circ$ RMS heading error by leveraging the polarimetric information. A comparison of the performance of different levels of polarimetric information proves the advantage in challenging scenarios.
Read more8/13/2024
0
Deep Learning-Based Robust Multi-Object Tracking via Fusion of mmWave Radar and Camera Sensors
Lei Cheng, Arindam Sengupta, Siyang Cao
Autonomous driving holds great promise in addressing traffic safety concerns by leveraging artificial intelligence and sensor technology. Multi-Object Tracking plays a critical role in ensuring safer and more efficient navigation through complex traffic scenarios. This paper presents a novel deep learning-based method that integrates radar and camera data to enhance the accuracy and robustness of Multi-Object Tracking in autonomous driving systems. The proposed method leverages a Bi-directional Long Short-Term Memory network to incorporate long-term temporal information and improve motion prediction. An appearance feature model inspired by FaceNet is used to establish associations between objects across different frames, ensuring consistent tracking. A tri-output mechanism is employed, consisting of individual outputs for radar and camera sensors and a fusion output, to provide robustness against sensor failures and produce accurate tracking results. Through extensive evaluations of real-world datasets, our approach demonstrates remarkable improvements in tracking accuracy, ensuring reliable performance even in low-visibility scenarios.
Read more7/12/2024