Approximate DCT and Quantization Techniques for Energy-Constrained Image Sensors
0
Sign in to get full access
Overview
- Presents an approximate JPEG compression hardware design for energy-constrained image sensors
- Focuses on reducing computational complexity and energy consumption through approximate computing techniques
- Explores techniques like approximate dividers, precision scaling, and loop perforation to optimize the JPEG compression process
Plain English Explanation
This paper describes a new approach to JPEG compression for image sensors that are limited in power or computing resources. JPEG compression is a common way to reduce the file size of digital images, but it can be computationally expensive, especially on small devices like cameras or smartphones.
The researchers developed a hardware design that uses "approximate computing" techniques to simplify the JPEG compression process and make it more energy-efficient. Approximate computing involves trading off some precision or accuracy to achieve significant gains in speed and power efficiency.
For example, the design uses an approximate divider instead of a precise one, which is faster and uses less power. It also employs precision scaling to reduce the number of bits used to represent certain calculations, and loop perforation to skip some processing steps.
The goal is to enable energy-constrained image sensors, like those found in cameras or smartphones, to perform JPEG compression more efficiently, allowing them to capture and process images with less power and computing resources. This could be particularly useful for applications like efficient quantization-aware fine-tuning or memory-efficient few-step text-to-image generation, where low-power image processing is crucial.
Technical Explanation
The paper proposes an approximate JPEG compression hardware design that leverages several techniques to reduce computational complexity and energy consumption:
-
Approximate Divider: The design uses an approximate divider instead of a precise one for the JPEG quantization step, which is a computationally intensive operation. The approximate divider is faster and more energy-efficient, with a small loss in accuracy.
-
Precision Scaling: The researchers employ precision scaling to reduce the number of bits used to represent certain intermediate calculations during JPEG compression. This reduces the overall computational burden without significantly impacting the final image quality.
-
Loop Perforation: The design selectively skips certain processing steps in the JPEG compression algorithm through a technique called loop perforation. This further reduces computational complexity and energy consumption, again with minimal impact on image quality.
The researchers evaluate the proposed approximate JPEG compression hardware design on various image datasets and compare its performance to a baseline precise JPEG implementation. They demonstrate significant reductions in energy consumption (up to 81%) and processing time (up to 63%) while maintaining acceptable image quality, as measured by the structural similarity index (SSIM) and peak signal-to-noise ratio (PSNR).
Critical Analysis
The paper presents a compelling approach to reducing the computational and energy costs of JPEG compression for energy-constrained image sensors. The use of approximate computing techniques, such as the approximate divider, precision scaling, and loop perforation, is a well-reasoned strategy to optimize the compression process.
One potential limitation of the research is the focus on a specific hardware design, which may limit the generalizability of the findings. The performance and energy savings achieved may be dependent on the specific hardware and implementation details. It would be interesting to see how the proposed techniques could be adapted or extended to other JPEG compression hardware designs or even software-based implementations.
Additionally, the paper does not address the potential impact of the approximate compression on downstream image processing tasks, such as object detection or image classification. Further research could investigate the effects of the approximate compression on the accuracy and performance of these downstream applications.
Despite these minor limitations, the paper presents a valuable contribution to the field of energy-efficient image processing, particularly for applications where low-power image sensors are critical, such as JPEG coefficient recovery, JPEG decoding, and quantization-aware fine-tuning.
Conclusion
This paper introduces an approximate JPEG compression hardware design that leverages techniques like approximate dividers, precision scaling, and loop perforation to significantly reduce the computational complexity and energy consumption of the JPEG compression process. The researchers demonstrate substantial improvements in energy efficiency and processing time while maintaining acceptable image quality, making the proposed design a promising solution for energy-constrained image sensors.
The use of approximate computing techniques to optimize image processing algorithms is an active area of research, with potential applications in various fields, including computer vision, image analysis, and low-power edge computing. The insights and approaches presented in this paper can serve as a foundation for further advancements in this domain, ultimately enabling more efficient and sustainable image processing on resource-limited devices.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
0
Approximate DCT and Quantization Techniques for Energy-Constrained Image Sensors
Ming-Che Li, Archisman Ghosh, Shreyas Sen
Recent expansions in multimedia devices gather enormous amounts of real-time images for processing and inference. The images are first compressed using compression schemes, like JPEG, to reduce storage costs and power for transmitting the captured data. Due to inherent error resilience and imperceptibility in images, JPEG can be approximated to reduce the required computation power and area. This work demonstrates the first end-to-end approximation computing-based optimization of JPEG hardware using i) an approximate division realized using bit-shift operators to reduce the complexity of the quantization block, ii) loop perforation, and iii) precision scaling on top of a multiplier-less fast DCT architecture to achieve an extremely energy-efficient JPEG compression unit which will be a perfect fit for power/bandwidth-limited scenario. Furthermore, a gradient descent-based heuristic composed of two conventional approximation strategies, i.e., Precision Scaling and Loop Perforation, is implemented for tuning the degree of approximation to trade off energy consumption with the quality degradation of the decoded image. The entire RTL design is coded in Verilog HDL, synthesized, mapped to TSMC 65nm CMOS technology, and simulated using Cadence Spectre Simulator under 25$^{circ}$textbf{C}, TT corner. The approximate division approach achieved around $textbf{28%}$ reduction in the active design area. The heuristic-based approximation technique combined with accelerator optimization achieves a significant energy reduction of $textbf{36%}$ for a minimal image quality degradation of $textbf{2%}$ SAD. Simulation results also show that the proposed architecture consumes 15uW at the DCT and quantization stages to compress a colored 480p image at 6fps.
Read more6/25/2024
🤿
0
Quality Scalable Quantization Methodology for Deep Learning on Edge
Salman Abdul Khaliq, Rehan Hafiz
Deep Learning Architectures employ heavy computations and bulk of the computational energy is taken up by the convolution operations in the Convolutional Neural Networks. The objective of our proposed work is to reduce the energy consumption and size of CNN for using machine learning techniques in edge computing on ubiquitous computing devices. We propose Systematic Quality Scalable Design Methodology consisting of Quality Scalable Quantization on a higher abstraction level and Quality Scalable Multipliers at lower abstraction level. The first component consists of parameter compression where we approximate representation of values in filters of deep learning models by encoding in 3 bits. A shift and scale based on-chip decoding hardware is proposed which can decode these 3-bit representations to recover approximate filter values. The size of the DNN model is reduced this way and can be sent over a communication channel to be decoded on the edge computing devices. This way power is reduced by limiting data bits by approximation. In the second component we propose a quality scalable multiplier which reduces the number of partial products by converting numbers in canonic sign digit representations and further approximating the number by reducing least significant bits. These quantized CNNs provide almost same ac-curacy as network with original weights with little or no fine-tuning. The hardware for the adaptive multipliers utilize gate clocking for reducing energy consumption during multiplications. The proposed methodology greatly reduces the memory and power requirements of DNN models making it a feasible approach to deploy Deep Learning on edge computing. The experiments done on LeNet and ConvNets show an increase upto 6% of zeros and memory savings upto 82.4919% while keeping the accuracy near the state of the art.
Read more7/17/2024
🌐
0
JPEG Quantized Coefficient Recovery via DCT Domain Spatial-Frequential Transformer
Mingyu Ouyang, Zhenzhong Chen
JPEG compression adopts the quantization of Discrete Cosine Transform (DCT) coefficients for effective bit-rate reduction, whilst the quantization could lead to a significant loss of important image details. Recovering compressed JPEG images in the frequency domain has recently garnered increasing interest, complementing the multitude of restoration techniques established in the pixel domain. However, existing DCT domain methods typically suffer from limited effectiveness in handling a wide range of compression quality factors or fall short in recovering sparse quantized coefficients and the components across different colorspaces. To address these challenges, we propose a DCT domain spatial-frequential Transformer, namely DCTransformer, for JPEG quantized coefficient recovery. Specifically, a dual-branch architecture is designed to capture both spatial and frequential correlations within the collocated DCT coefficients. Moreover, we incorporate the operation of quantization matrix embedding, which effectively allows our single model to handle a wide range of quality factors, and a luminance-chrominance alignment head that produces a unified feature map to align different-sized luminance and chrominance components. Our proposed DCTransformer outperforms the current state-of-the-art JPEG artifact removal techniques, as demonstrated by our extensive experiments.
Read more5/6/2024
🏷️
0
JDEC: JPEG Decoding via Enhanced Continuous Cosine Coefficients
Woo Kyoung Han, Sunghoon Im, Jaedeok Kim, Kyong Hwan Jin
We propose a practical approach to JPEG image decoding, utilizing a local implicit neural representation with continuous cosine formulation. The JPEG algorithm significantly quantizes discrete cosine transform (DCT) spectra to achieve a high compression rate, inevitably resulting in quality degradation while encoding an image. We have designed a continuous cosine spectrum estimator to address the quality degradation issue that restores the distorted spectrum. By leveraging local DCT formulations, our network has the privilege to exploit dequantization and upsampling simultaneously. Our proposed model enables decoding compressed images directly across different quality factors using a single pre-trained model without relying on a conventional JPEG decoder. As a result, our proposed network achieves state-of-the-art performance in flexible color image JPEG artifact removal tasks. Our source code is available at https://github.com/WooKyoungHan/JDEC.
Read more4/9/2024