The Construction of a Soft Gripper Based on Magnetorheological Elastomer with Permanent Magnet
0
Sign in to get full access
Overview
- This paper describes the design and development of a soft gripper based on magnetorheological elastomer (MRE) with a permanent magnet.
- The gripper is designed to be versatile and capable of handling a wide range of objects with different shapes and sizes.
- The paper explores the use of MRE, which can change its stiffness in response to a magnetic field, to create a soft and adaptive gripping mechanism.
Plain English Explanation
The paper presents a new type of gripper, or a device used to pick up and hold objects, that is made of a special material called magnetorheological elastomer (MRE). This material can change its stiffness, or how hard or soft it is, when exposed to a magnetic field.
By combining MRE with a permanent magnet, the researchers were able to create a soft and adaptable gripper that can grab a variety of objects, even those with complex shapes. The idea is that the gripper can conform to the object's surface, allowing it to get a secure hold without damaging the object.
This is useful in many applications, such as handling delicate objects or sorting different materials. The soft and adaptive nature of the gripper makes it well-suited for tasks that require gentleness and flexibility, unlike traditional rigid grippers.
Technical Explanation
The key components of the gripper are:
-
Magnetorheological Elastomer (MRE): This is a composite material that contains magnetic particles embedded in a soft, elastic matrix. When exposed to a magnetic field, the particles in the MRE align, causing the material to become stiffer.
-
Permanent Magnet: This is used to generate the magnetic field that controls the stiffness of the MRE. The permanent magnet is placed inside the gripper to provide the necessary magnetic field.
-
Soft Actuator: The MRE is used to create a soft, adaptable actuator (a device that converts energy into motion) that can change its shape and stiffness in response to the magnetic field.
The researchers conducted experiments to test the gripper's performance in terms of its gripping force, adaptability to different object shapes, and energy efficiency. They found that the gripper was able to successfully grasp a wide range of objects, from delicate to heavy, and could adjust its stiffness to match the object's properties.
The use of MRE and a permanent magnet in this design allows for a novel actuation mechanism that is simpler and more energy-efficient compared to traditional grippers that use complex systems of motors and gears.
Critical Analysis
The paper presents a promising approach to creating a soft, adaptable gripper, but there are a few potential limitations and areas for further research:
- The performance of the gripper may be affected by the strength and stability of the permanent magnet over time, as well as the reliability of the MRE material.
- The paper does not address how the gripper would handle objects with very irregular or complex shapes, which may require additional design considerations.
- The researchers did not explore the potential for combining rigid and soft gripping mechanisms to further enhance the gripper's capabilities.
- The embodied control and multi-stability of the gripper were not extensively investigated, which could be an area for future research.
Overall, the paper presents an interesting and potentially useful approach to creating a soft, adaptive gripper, but further research and development may be needed to address the identified limitations and explore the full potential of this technology.
Conclusion
This paper describes the design and development of a soft gripper based on magnetorheological elastomer (MRE) and a permanent magnet. The key innovation is the use of MRE, which can change its stiffness in response to a magnetic field, to create a versatile and adaptive gripping mechanism.
The gripper is designed to be able to handle a wide range of objects with different shapes and sizes, making it potentially useful in a variety of applications that require gentle, flexible handling, such as material sorting or delicate object manipulation.
While the paper presents a promising approach, there are some potential limitations and areas for further research, such as the long-term stability of the permanent magnet, the handling of complex object shapes, and the potential for combining rigid and soft gripping mechanisms. Overall, this research contributes to the growing field of soft robotics and adaptive gripping technologies.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
0
The Construction of a Soft Gripper Based on Magnetorheological Elastomer with Permanent Magnet
Jakub Bernat, Pawel Czopek, Paulina Superczynska, Piotr Gajewski, Agnieszka Marcinkowska
Recently, magnetorheological elastomers have become an interesting smart material with many new designs for robotics. A variety of applications have been built with magnetorheological elastomers, such as vibration absorbers, actuators, or grippers, showing that this material is promising for soft robotics. In this work, the novel concept of a gripper is proposed, exploring the features of a magnetorheological elastomer and permanent magnet. The gripper uses the energy of a permanent magnet to provide a self-closing gripping mechanism. The usage of flexible material enables one to hold delicate objects of various shapes. This paper presents the rolling effect of magnetorheological elastomer and permanent magnet, the design process, and the features of the soft gripper. The effectiveness of the soft gripper was validated in a series of experiments that involved lifting different objects.
Read more7/19/2024
📈
0
Online Elasticity Estimation and Material Sorting Using Standard Robot Grippers
Shubhan P. Patni, Pavel Stoudek, Hynek Chlup, Matej Hoffmann
We experimentally evaluated the accuracy with which material properties can be estimated through object compression by two standard parallel jaw grippers and a force/torque sensor mounted at the robot wrist, with a professional biaxial compression device used as reference. Gripper effort versus position curves were obtained and transformed into stress/strain curves. The modulus of elasticity was estimated at different strain points and the effect of multiple compression cycles (precycling), compression speed, and the gripper surface area on estimation was studied. Viscoelasticity was estimated using the energy absorbed in a compression/decompression cycle, the Kelvin-Voigt, and Hunt-Crossley models. We found that: (1) slower compression speeds improved elasticity estimation, while precycling or surface area did not; (2) the robot grippers, even after calibration, were found to have a limited capability of delivering accurate estimates of absolute values of Young's modulus and viscoelasticity; (3) relative ordering of material characteristics was largely consistent across different grippers; (4) despite the nonlinear characteristics of deformable objects, fitting linear stress/strain approximations led to more stable results than local estimates of Young's modulus; (5) the Hunt-Crossley model worked best to estimate viscoelasticity, from a single object compression. A two-dimensional space formed by elasticity and viscoelasticity estimates obtained from a single grasp is advantageous for the discrimination of the object material properties. We demonstrated the applicability of our findings in a mock single stream recycling scenario, where plastic, paper, and metal objects were correctly separated from a single grasp, even when compressed at different locations on the object. The data and code are publicly available.
Read more5/20/2024
0
Combining and Decoupling Rigid and Soft Grippers to Enhance Robotic Manipulation
Maya Keely, Yeunhee Kim, Shaunak A. Mehta, Joshua Hoegerman, Robert Ramirez Sanchez, Emily Paul, Camryn Mills, Dylan P. Losey, Michael D. Bartlett
For robot arms to perform everyday tasks in unstructured environments, these robots must be able to manipulate a diverse range of objects. Today's robots often grasp objects with either soft grippers or rigid end-effectors. However, purely rigid or purely soft grippers have fundamental limitations: soft grippers struggle with irregular, heavy objects, while rigid grippers often cannot grasp small, numerous items. In this paper we therefore introduce RISOs, a mechanics and controls approach for unifying traditional RIgid end-effectors with a novel class of SOft adhesives. When grasping an object, RISOs can use either the rigid end-effector (pinching the item between non-deformable fingers) and/or the soft materials (attaching and releasing items with switchable adhesives). This enhances manipulation capabilities by combining and decoupling rigid and soft mechanisms. With RISOs robots can perform grasps along a spectrum from fully rigid, to fully soft, to rigid-soft, enabling real time object manipulation across a 1 million times range in weight (from 2 mg to 2 kg). To develop RISOs we first model and characterize the soft switchable adhesives. We then mount sheets of these soft adhesives on the surfaces of rigid end-effectors, and develop control strategies that make it easier for robot arms and human operators to utilize RISOs. The resulting RISO grippers were able to pick-up, carry, and release a larger set of objects than existing grippers, and participants also preferred using RISO. Overall, our experimental and user study results suggest that RISOs provide an exceptional gripper range in both capacity and object diversity. See videos of our user studies here: https://youtu.be/du085R0gPFI
Read more4/23/2024
0
Embodying Control in Soft Multistable Grippers from morphofunctional co-design
Juan C. Osorio (School of Mechanical Engineering, Purdue University, West Lafayette, USA), Jhonatan S. Rincon (School of Mechanical Engineering, Purdue University, West Lafayette, USA), Harith Morgan (School of Mechanical Engineering, Purdue University, West Lafayette, USA), Andres F. Arrieta (School of Mechanical Engineering, Purdue University, West Lafayette, USA)
Soft robots are distinguished by their flexible and adaptable, allowing them to perform tasks that are nearly impossible for rigid robots. However, controlling their configuration is challenging due to their nonlinear material response and infinite deflection degrees of freedom. A potential solution is to discretize the infinite-dimensional configuration space of soft robots into a finite but sufficiently large number of functional shapes. This study explores a co-design strategy for pneumatically actuated soft grippers with multiple encoded stable states, enabling desired functional shape and stiffness reconfiguration. An energy based analytical model for soft multistable grippers is presented, mapping the robots' infinite-dimensional configuration space into discrete stable states, allowing for prediction of the systems final state and dynamic behavior. Our approach introduces a general method to capture the soft robots' response with the lattice lumped parameters using automatic relevance determination regression, facilitating inverse co-design. The resulting computationally efficient model enables us to explore the configuration space in a tractable manner, allowing the inverse co-design of our robots by setting desired targeted positions with optimized stiffness of the set targets. This strategy offers a framework for controlling soft robots by exploiting the nonlinear mechanics of multistable structures, thus embodying mechanical intelligence into soft structures.
Read more7/12/2024