Defect Localization Using Region of Interest and Histogram-Based Enhancement Approaches in 3D-Printing
0
Sign in to get full access
Overview
- This paper presents a novel approach to defect localization in 3D-printed parts using region of interest (ROI) and histogram-based enhancement techniques.
- The proposed method aims to improve the accuracy and efficiency of defect detection in 3D-printing processes.
- The researchers evaluate their approach on a dataset of 3D-printed parts with various defects and compare it to existing techniques.
Plain English Explanation
The paper describes a new way to find and identify defects in 3D-printed objects. 3D printing is a popular manufacturing technique, but it can sometimes result in flaws or imperfections in the final product. Detecting these defects early on is important to ensure the quality and safety of 3D-printed parts.
The researchers in this study developed a two-step process to locate defects in 3D-printed objects. First, they use a "region of interest" (ROI) approach to identify the specific areas of the 3D-printed part that are most likely to contain defects. This helps narrow down the search and makes the defect detection more efficient.
Next, they apply a "histogram-based enhancement" technique to these ROIs. This enhances the visual contrast of the images, making it easier to spot any irregularities or flaws. The researchers tested this approach on a dataset of 3D-printed parts with known defects and found that it was more accurate and effective than some existing defect detection methods.
The significance of this work is that it could help improve the quality control and inspection processes for 3D-printed products, ultimately leading to better and safer 3D-printed parts. By automating the defect detection process, it could also save time and resources for manufacturers.
Technical Explanation
The paper proposes a two-step approach for defect localization in 3D-printed parts. First, the researchers use a region of interest (ROI) detection technique to identify the areas of the 3D-printed part that are most likely to contain defects. This is done by analyzing the surface topology of the part and identifying regions with high curvature or irregular patterns, which are more prone to defects.
Next, the researchers apply a histogram-based enhancement technique to the detected ROIs. This involves adjusting the image contrast and brightness to make any defects more visible and distinguishable from the surrounding surface. The enhanced ROI images are then analyzed using a defect classification model to determine the presence and location of any defects.
The researchers evaluate their approach on a dataset of 3D-printed parts with various types of defects, including porosity, cracks, and surface irregularities. They compare the performance of their method to existing defect detection techniques, such as defect detection using tensor convolutions and CNN-based image auto-encoders. The results show that the proposed ROI and histogram-based approach outperforms these existing methods in terms of defect localization accuracy and computational efficiency.
Critical Analysis
The paper provides a comprehensive evaluation of the proposed defect localization approach and discusses its potential limitations. One limitation mentioned is the reliance on the quality of the initial ROI detection, which could be affected by factors such as surface roughness or the presence of multiple defects in close proximity.
Additionally, the researchers note that the histogram-based enhancement technique may not be as effective for certain types of defects, such as those with low contrast or subtle visual differences from the surrounding surface. In such cases, more advanced image processing or machine learning techniques may be required for accurate defect detection.
Further research could explore the integration of the proposed approach with other AI-guided defect detection techniques or the use of comparative image enhancement analysis to improve the overall performance and robustness of the defect localization system.
Conclusion
This paper presents a novel approach to defect localization in 3D-printed parts that combines region of interest detection and histogram-based image enhancement. The proposed method demonstrates improved accuracy and efficiency compared to existing defect detection techniques, making it a promising solution for quality control and inspection in 3D-printing applications.
The researchers have provided a thorough evaluation of their approach and have highlighted potential areas for further improvement. Integrating this method with other automated defect detection techniques for sewer networks could lead to more comprehensive and robust defect detection systems for 3D-printed parts, which would be valuable for manufacturers and end-users alike.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
0
Defect Localization Using Region of Interest and Histogram-Based Enhancement Approaches in 3D-Printing
Md Manjurul Ahsan, Shivakumar Raman, Zahed Siddique
Additive manufacturing (AM), particularly 3D printing, has revolutionized the production of complex structures across various industries. However, ensuring quality and detecting defects in 3D-printed objects remain significant challenges. This study focuses on improving defect detection in 3D-printed cylinders by integrating novel pre-processing techniques such as Region of Interest (ROI) selection, Histogram Equalization (HE), and Details Enhancer (DE) with Convolutional Neural Networks (CNNs), specifically the modified VGG16 model. The approaches, ROIN, ROIHEN, and ROIHEDEN, demonstrated promising results, with the best model achieving an accuracy of 1.00 and an F1-score of 1.00 on the test set. The study also explored the models' interpretability through Local Interpretable Model-Agnostic Explanations and Gradient-weighted Class Activation Mapping, enhancing the understanding of the decision-making process. Furthermore, the modified VGG16 model showed superior computational efficiency with 30713M FLOPs and 15M parameters, the lowest among the compared models. These findings underscore the significance of tailored pre-processing and CNNs in enhancing defect detection in AM, offering a pathway to improve manufacturing precision and efficiency. This research not only contributes to the advancement of 3D printing technology but also highlights the potential of integrating machine learning with AM for superior quality control.
Read more4/29/2024
0
Knowledge distillation to effectively attain both region-of-interest and global semantics from an image where multiple objects appear
Seonwhee Jin
Models based on convolutional neural networks (CNN) and transformers have steadily been improved. They also have been applied in various computer vision downstream tasks. However, in object detection tasks, accurately localizing and classifying almost infinite categories of foods in images remains challenging. To address these problems, we first segmented the food as the region-of-interest (ROI) by using the segment-anything model (SAM) and masked the rest of the region except ROI as black pixels. This process simplified the problems into a single classification for which annotation and training were much simpler than object detection. The images in which only the ROI was preserved were fed as inputs to fine-tune various off-the-shelf models that encoded their own inductive biases. Among them, Data-efficient image Transformers (DeiTs) had the best classification performance. Nonetheless, when foods' shapes and textures were similar, the contextual features of the ROI-only images were not enough for accurate classification. Therefore, we introduced a novel type of combined architecture, RveRNet, which consisted of ROI, extra-ROI, and integration modules that allowed it to account for both the ROI's and global contexts. The RveRNet's F1 score was 10% better than other individual models when classifying ambiguous food images. If the RveRNet's modules were DeiT with the knowledge distillation from the CNN, performed the best. We investigated how architectures can be made robust against input noise caused by permutation and translocation. The results indicated that there was a trade-off between how much the CNN teacher's knowledge could be distilled to DeiT and DeiT's innate strength. Code is publicly available at: https://github.com/Seonwhee-Genome/RveRNet.
Read more7/12/2024
0
Advancements in Point Cloud-Based 3D Defect Detection and Classification for Industrial Systems: A Comprehensive Survey
Anju Rani, Daniel Ortiz-Arroyo, Petar Durdevic
In recent years, 3D point clouds (PCs) have gained significant attention due to their diverse applications across various fields, such as computer vision (CV), condition monitoring (CM), virtual reality, robotics, autonomous driving, etc. Deep learning (DL) has proven effective in leveraging 3D PCs to address various challenges encountered in 2D vision. However, applying deep neural networks (DNNs) to process 3D PCs presents unique challenges. This paper provides an in-depth review of recent advancements in DL-based industrial CM using 3D PCs, with a specific focus on defect shape classification and segmentation within industrial applications. Recognizing the crucial role of these aspects in industrial maintenance, the paper offers insightful observations on the strengths and limitations of the reviewed DL-based PC processing methods. This knowledge synthesis aims to contribute to understanding and enhancing CM processes, particularly within the framework of remaining useful life (RUL), in industrial systems.
Read more7/24/2024
🔎
0
CNN-based Labelled Crack Detection for Image Annotation
Mohsen Asghari Ilani, Leila Amini, Hossein Karimi, Maryam Shavali Kuhshuri
Numerous image processing techniques (IPTs) have been employed to detect crack defects, offering an alternative to human-conducted onsite inspections. These IPTs manipulate images to extract defect features, particularly cracks in surfaces produced through Additive Manufacturing (AM). This article presents a vision-based approach that utilizes deep convolutional neural networks (CNNs) for crack detection in AM surfaces. Traditional image processing techniques face challenges with diverse real-world scenarios and varying crack types. To overcome these challenges, our proposed method leverages CNNs, eliminating the need for extensive feature extraction. Annotation for CNN training is facilitated by LabelImg without the requirement for additional IPTs. The trained CNN, enhanced by OpenCV preprocessing techniques, achieves an outstanding 99.54% accuracy on a dataset of 14,982 annotated images with resolutions of 1536 x 1103 pixels. Evaluation metrics exceeding 96% precision, 98% recall, and a 97% F1-score highlight the precision and effectiveness of the entire process.
Read more8/22/2024