Development and Validation of a Modular Sensor-Based System for Gait Analysis and Control in Lower-Limb Exoskeletons
0
Sign in to get full access
Overview
- This paper describes the development and validation of a modular sensor-based system for gait analysis and control in lower-limb exoskeletons.
- The system uses a combination of inertial measurement units (IMUs) and force sensors to detect and analyze the user's gait, which is then used to control the exoskeleton.
- The authors validate the system's performance through experiments with healthy participants and demonstrate its potential for assisting people with mobility impairments.
Plain English Explanation
The paper presents a new way to analyze and control lower-limb exoskeletons, which are wearable robotic devices that can assist people with mobility issues. The key idea is to use a combination of sensors to track the user's gait - the way they walk. This information is then used to control the exoskeleton, helping the user move more easily.
The system includes inertial measurement units (IMUs) that can detect the user's movements, as well as force sensors that measure the forces applied to the exoskeleton. By combining this data, the system can accurately determine the user's gait phase - whether they are in the process of taking a step, standing still, or some other part of the walking cycle.
The researchers tested the system with healthy participants and found that it was able to reliably detect the user's gait and control the exoskeleton accordingly. This suggests the system could be useful for people with mobility impairments, as it could help them walk more easily and naturally.
Technical Explanation
The paper describes the development and validation of a modular sensor-based system for gait analysis and control in lower-limb exoskeletons. The system uses a combination of inertial measurement units (IMUs) and force sensors to detect the user's gait patterns, which are then used to control the exoskeleton.
The system's architecture includes a set of IMUs placed on the user's lower limbs and a force sensor integrated into the exoskeleton. The IMUs measure the user's limb movements, while the force sensor detects the forces applied to the exoskeleton. This data is then processed by a control algorithm to estimate the user's gait phase and provide appropriate control signals to the exoskeleton.
The authors validate the system's performance through experiments with healthy participants. The participants wore the exoskeleton and performed various walking tasks, while the system's gait phase estimation and exoskeleton control were evaluated. The results demonstrate the system's ability to accurately detect the user's gait and provide appropriate assistance, suggesting its potential for assisting people with mobility impairments.
Critical Analysis
The paper provides a comprehensive approach to gait analysis and control in lower-limb exoskeletons, leveraging a modular sensor-based system. The authors have addressed several key challenges, such as accurately detecting the user's gait phase and using this information to control the exoskeleton.
One potential limitation of the study is the use of healthy participants. While this allows for a more controlled evaluation, it does not fully represent the challenges that may arise when using the system with individuals with mobility impairments. Further research with a diverse pool of participants, including those with disabilities, would be valuable to assess the system's real-world performance and identify any additional design considerations.
Additionally, the paper does not provide extensive details on the control algorithm used to translate the sensor data into exoskeleton commands. A more in-depth explanation of the control strategy and its adaptability to different user needs would be helpful for understanding the system's capabilities and potential limitations.
Conclusion
This paper presents an innovative modular sensor-based system for gait analysis and control in lower-limb exoskeletons. The system's ability to accurately detect the user's gait patterns and provide appropriate assistance demonstrates its potential for improving the mobility and quality of life for individuals with movement disorders. While the current study focused on healthy participants, further research with a more diverse user population could help refine the system and expand its applications in the field of wearable robotics and assistive technologies.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
0
Development and Validation of a Modular Sensor-Based System for Gait Analysis and Control in Lower-Limb Exoskeletons
Giorgos Marinou, Ibrahima Kourouma, Katja Mombaur
With rapid advancements in exoskeleton hardware technologies, successful assessment and accurate control remain challenging. This study introduces a modular sensor-based system to enhance biomechanical evaluation and control in lower-limb exoskeletons, utilizing advanced sensor technologies and fuzzy logic. We aim to surpass the limitations of current biomechanical evaluation methods confined to laboratories and to address the high costs and complexity of exoskeleton control systems. The system integrates inertial measurement units, force-sensitive resistors, and load cells into instrumented crutches and 3D-printed insoles. These components function both independently and collectively to capture comprehensive biomechanical data, including the anteroposterior center of pressure and crutch ground reaction forces. This data is processed through a central unit using fuzzy logic algorithms for real-time gait phase estimation and exoskeleton control. Validation experiments with three participants, benchmarked against gold-standard motion capture and force plate technologies, demonstrate our system's capability for reliable gait phase detection and precise biomechanical measurements. By offering our designs open-source and integrating cost-effective technologies, this study advances wearable robotics and promotes broader innovation and adoption in exoskeleton research.
Read more9/4/2024
0
User-centered evaluation of the Wearable Walker lower limb exoskeleton, preliminary assessment based on the Experience protocol
Cristian Camardella, Vittorio Lippi, Francesco Porcini, Giulia Bassani, Lucia Lencioni, Christoph Mauer, Christian Haverkamp, Carlo Alberto Avizzano, Antonio Frisoli, Alessandro Filippeschi
Using lower-limbs exoskeletons provides potential advantages in terms of productivity and safety associated with reduced stress. However, complex issues in human-robot interaction are still open, such as the physiological effects of exoskeletons and the impact on the user's subjective experience. In this work, an innovative exoskeleton, the Wearable Walker, is assessed using the EXPERIENCE benchmarking protocol from the EUROBENCH project. The Wearable Walker is a lower-limb exoskeleton that enhances human abilities, such as carrying loads. The device uses a unique control approach called Blend Control that provides smooth assistance torques. It operates two models simultaneously, one in the case in which the left foot is grounded and another for the grounded right foot. These models generate assistive torques combined to provide continuous and smooth overall assistance, preventing any abrupt changes in torque due to model switching. The EXPERIENCE protocol consists of walking on flat ground while gathering physiological signals such as heart rate, its variability, respiration rate, and galvanic skin response and completing a questionnaire. The test was performed with five healthy subjects. The scope of the present study is twofold: to evaluate the specific exoskeleton and its current control system to gain insight into possible improvements and to present a case study for a formal and replicable benchmarking of wearable robots.
Read more8/19/2024
0
Modelling, Design Optimization and Prototype development of Knee Exoskeleton
Shashank Mani Gautam, Ekta Singla, Ashish Singla
This study focuses on enhancing the design of an existing knee exoskeleton by addressing limitations in the range of motion (ROM) during Sit-to-Stand (STS) motions. While current knee exoskeletons emphasize toughness and rehabilitation, their closed-loop mechanisms hinder optimal ROM, which is crucial for effective rehabilitation. This research aims to optimize the exoskeleton design to achieve the necessary ROM, improving its functionality in rehabilitation. This can be achieved by utilizing kinematic modeling and formulation, the existing design was represented in the non-linear and non-convex mathematical functions. Optimization techniques, considering constraints based on human leg measurements, were applied to determine the best dimensions for the exoskeleton. This resulted in a significant increase in ROM compared to existing models. A MATLAB program was developed to compare the ROM of the optimized exoskeleton with the original design. To validate the practicality of the optimized design, analysis was conducted using a mannequin with average human dimensions, followed by constructing a cardboard dummy model to confirm simulation results. The STS motion of an average human was captured using a camera and TRACKER software, and the motion was compared with that of the dummy model to identify any misalignments between the human and exoskeleton knee joints. Furthermore, a prototype of the knee joint exoskeleton is being developed to further investigate misalignments and improve the design. Future work includes the use of EMG sensors for more detailed analysis and better results.
Read more9/5/2024
0
Adaptive Gait Modeling and Optimization for Principally Kinematic Systems
Siming Deng, Noah J. Cowan, Brian A. Bittner
Robotic adaptation to unanticipated operating conditions is crucial to achieving persistence and robustness in complex real world settings. For a wide range of cutting-edge robotic systems, such as micro- and nano-scale robots, soft robots, medical robots, and bio-hybrid robots, it is infeasible to anticipate the operating environment a priori due to complexities that arise from numerous factors including imprecision in manufacturing, chemo-mechanical forces, and poorly understood contact mechanics. Drawing inspiration from data-driven modeling, geometric mechanics (or gauge theory), and adaptive control, we employ an adaptive system identification framework and demonstrate its efficacy in enhancing the performance of principally kinematic locomotors (those governed by Rayleigh dissipation or zero momentum conservation). We showcase the capability of the adaptive model to efficiently accommodate varying terrains and iteratively modified behaviors within a behavior optimization framework. This provides both the ability to improve fundamental behaviors and perform motion tracking to precision. Notably, we are capable of optimizing the gaits of the Purcell swimmer using approximately 10 cycles per link, which for the nine-link Purcell swimmer provides a factor of ten improvement in optimization speed over the state of the art. Beyond simply a computational speed up, this ten-fold improvement may enable this method to be successfully deployed for in-situ behavior refinement, injury recovery, and terrain adaptation, particularly in domains where simulations provide poor guides for the real world.
Read more4/19/2024