User-centered evaluation of the Wearable Walker lower limb exoskeleton, preliminary assessment based on the Experience protocol
0
Sign in to get full access
Overview
- The provided paper describes the development and evaluation of a wearable walker exoskeleton designed to assist people with mobility challenges.
- The exoskeleton is designed to provide support for the back, shoulders, and sit-to-stand transitions.
- The paper presents the materials and methods used to develop and test the exoskeleton, as well as the results of user studies conducted to assess its usability and effectiveness.
Plain English Explanation
The researchers created a wearable device called an "exoskeleton" that is designed to help people who have difficulty walking or moving around. The exoskeleton is meant to provide support for the back, shoulders, and when a person is trying to stand up from a sitting position.
The paper explains how the researchers designed and built the exoskeleton, and the different tests they did to see how well it works. They had people try out the exoskeleton and gave them surveys to get their feedback on how easy it was to use and how helpful it was.
The key ideas are that this exoskeleton could potentially help people with mobility issues by supporting their bodies and making it easier for them to move around and stand up. The researchers wanted to see if this type of device is actually useful and practical for people to use in their daily lives.
Technical Explanation
The researchers developed a wearable walker exoskeleton to assist individuals with mobility challenges. The exoskeleton was designed to provide back support, shoulder support, and aid in sit-to-stand transitions.
To evaluate the exoskeleton, the researchers conducted user studies with healthy participants. The participants were asked to perform various tasks while wearing the exoskeleton, and provide feedback on its usability and effectiveness. The researchers also performed heuristic evaluations to assess the design of the exoskeleton's key features.
The results of the studies suggest that the exoskeleton can potentially be a useful tool for assisting with physical human-human interaction and improving the mobility and independence of individuals with movement challenges.
Critical Analysis
The paper provides a thorough description of the development and evaluation of the wearable walker exoskeleton. However, it is important to note that the user studies were conducted with healthy participants, and the researchers acknowledge that further research is needed to assess the exoskeleton's performance and acceptability among individuals with actual mobility impairments.
Additionally, the paper does not address the potential cost and accessibility of the exoskeleton, which could be important factors in determining its real-world adoption and impact. It would be helpful to have more information on the manufacturing process, materials used, and projected pricing to understand the feasibility and scalability of this technology.
Conclusion
The wearable walker exoskeleton described in this paper represents a promising approach to assisting individuals with mobility challenges. The researchers have demonstrated the exoskeleton's ability to provide back and shoulder support and aid in sit-to-stand transitions, which could significantly improve the quality of life for those with limited mobility.
While further research is needed to assess the exoskeleton's performance and acceptance among individuals with actual mobility impairments, the findings presented in this paper suggest that this technology has the potential to enhance physical human-human interaction and promote greater independence and social engagement for those who rely on assistive devices.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
0
User-centered evaluation of the Wearable Walker lower limb exoskeleton, preliminary assessment based on the Experience protocol
Cristian Camardella, Vittorio Lippi, Francesco Porcini, Giulia Bassani, Lucia Lencioni, Christoph Mauer, Christian Haverkamp, Carlo Alberto Avizzano, Antonio Frisoli, Alessandro Filippeschi
Using lower-limbs exoskeletons provides potential advantages in terms of productivity and safety associated with reduced stress. However, complex issues in human-robot interaction are still open, such as the physiological effects of exoskeletons and the impact on the user's subjective experience. In this work, an innovative exoskeleton, the Wearable Walker, is assessed using the EXPERIENCE benchmarking protocol from the EUROBENCH project. The Wearable Walker is a lower-limb exoskeleton that enhances human abilities, such as carrying loads. The device uses a unique control approach called Blend Control that provides smooth assistance torques. It operates two models simultaneously, one in the case in which the left foot is grounded and another for the grounded right foot. These models generate assistive torques combined to provide continuous and smooth overall assistance, preventing any abrupt changes in torque due to model switching. The EXPERIENCE protocol consists of walking on flat ground while gathering physiological signals such as heart rate, its variability, respiration rate, and galvanic skin response and completing a questionnaire. The test was performed with five healthy subjects. The scope of the present study is twofold: to evaluate the specific exoskeleton and its current control system to gain insight into possible improvements and to present a case study for a formal and replicable benchmarking of wearable robots.
Read more8/19/2024
0
Development and Validation of a Modular Sensor-Based System for Gait Analysis and Control in Lower-Limb Exoskeletons
Giorgos Marinou, Ibrahima Kourouma, Katja Mombaur
With rapid advancements in exoskeleton hardware technologies, successful assessment and accurate control remain challenging. This study introduces a modular sensor-based system to enhance biomechanical evaluation and control in lower-limb exoskeletons, utilizing advanced sensor technologies and fuzzy logic. We aim to surpass the limitations of current biomechanical evaluation methods confined to laboratories and to address the high costs and complexity of exoskeleton control systems. The system integrates inertial measurement units, force-sensitive resistors, and load cells into instrumented crutches and 3D-printed insoles. These components function both independently and collectively to capture comprehensive biomechanical data, including the anteroposterior center of pressure and crutch ground reaction forces. This data is processed through a central unit using fuzzy logic algorithms for real-time gait phase estimation and exoskeleton control. Validation experiments with three participants, benchmarked against gold-standard motion capture and force plate technologies, demonstrate our system's capability for reliable gait phase detection and precise biomechanical measurements. By offering our designs open-source and integrating cost-effective technologies, this study advances wearable robotics and promotes broader innovation and adoption in exoskeleton research.
Read more9/4/2024
🤔
0
Usability of back support, shoulder support and sit-stand passive occupational exoskeletons: A heuristic evaluation of the designs
Alejandra Martinez, Laura Tovar, Carla Irigoyen Amparan, Karen Gonzalez, Prajina Edayath, Priyadarshini Pennathur, Arunkumar Pennathur
Occupational exoskeletons promise to alleviate musculoskeletal injuries among industrial workers. Knowledge of the usability of the exoskeleton designs with respect to the user device interaction points, and the problems in design features, functions and parts, evaluated and rated using design principles is still limited. Further, the usability of exoskeletons when assembling, donning, doffing and disassembling them, tasks that can be considered pre and post use tasks are also critical to evaluate, especially from a device design standpoint. We conducted a heuristic evaluation of the usability of three popular exoskeletons, a back support device, a shoulder support device, and a sit stand exoskeleton when assembling, donning, doffing and disassembling them. Seven evaluators used Nielsen and Shneiderman usability heuristics to evaluate the devices. Results indicate that none of the three exoskeletons had any catastrophic usability problems, but all three had major usability problems including accommodating diverse users, the assembly, donning and doffing being a two person operation, poor documentation, a lack of sequence indicators during assembly of the devices, presence of safety hazards while donning and doffing the devices, and manual strength requirements. Further, the assembly task is the most difficult task resulting in the most violations of usability heuristics. The exoskeleton human factors research community should include diverse users in their evaluations and conduct usability, accessibility, and safety evaluations of these devices to provide design feedback to device designers.
Read more8/7/2024
0
A User Study Method on Healthy Participants for Assessing an Assistive Wearable Robot Utilising EMG Sensing
Cem Suulker, Alexander Greenway, Sophie Skach, Ildar Farkhatdinov, Stuart Charles Miller, Kaspar Althoefer
Hand-wearable robots, specifically exoskeletons, are designed to aid hands in daily activities, playing a crucial role in post-stroke rehabilitation and assisting the elderly. Our contribution to this field is a textile robotic glove with integrated actuators. These actuators, powered by pneumatic pressure, guide the user's hand to a desired position. Crafted from textile materials, our soft robotic glove prioritizes safety, lightweight construction, and user comfort. Utilizing the ruffles technique, integrated actuators guarantee high performance in blocking force and bending effectiveness. Here, we present a participant study confirming the effectiveness of our robotic device on a healthy participant group, exploiting EMG sensing.
Read more8/2/2024